Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Gateway
If your gate keypad is throwing “access denied” errors after the last storm or your community’s slide gate stalled half-open on a Friday afternoon, we can help. Gatewood Fence & Gate has been repairing and installing Gate Access Control systems across Gateway’s gated subdivisions for years, and we know exactly how these systems fail in Lee County’s sun, salt, and wet season. When you call (877) 610-2993, a real person answers, 24/7.
Gateway is different from most towns. Nearly every neighborhood here sits behind a gate, and most of those gates were installed when the community was built out in phases from the late 1980s through the mid-2000s. That means the operators, circuit boards, loop detectors, and keypads are now aging out together. Our phone rings daily with Gateway HOAs and homeowners whose access control equipment has reached the end of its service life, and we carry the parts to fix them same week.
Why Gatewood Fence & Gate Is Gateway’s Preferred Gate Access Control Company
Hal Gatewood started this company in 2001 and never stopped working on gates. He’s owner-operated, not a franchise with a rotating crew. The person who shows up to your house in Gateway is someone whose name is on the shop and whose number you’ll have if anything goes wrong later. That’s the oldest accountability there is.
We’ve worked on enough access systems in Gateway to know the building and HOA terrain. We coordinate with property managers, match the original community-specified hardware, and handle the board approval process before we start. When a Country Club East liftgate wouldn’t close after a wind storm, we found a corroded circuit board and realigned the photo-eye, then walked the manager through manual release so residents could get in and out during the next outage. That’s the kind of work we do regularly here.
And because we weld on site, we don’t haul your gate off to a shop or sell you a new operator when a board repair is all you need. Repair-first is our whole approach. We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and our 90-Day Done Right Promise is stamped in writing on every job.
From Gateway Commons to the Fairway Lakes area, homeowners call us because we show up in the window we promised, quote the price before we start, and don’t change it at the door.
Our Gate Access Control Services in Gateway
Keypad Entry
Keypad entry is the most common access system in Gateway’s villa and single-family communities. Salt air and UV tear up the ribbon cable behind the keypad over time, leading to intermittent “access denied” errors that only appear when wind or humidity is high. We replace keypads, hardwire them properly, and test them so delivery drivers and visitors get through without a call to the HOA.
Remote Control
Remote and transmitter issues are usually a receiver problem, not a remote problem. In Gateway, receiver boxes get fried by surges after storms and by gradual moisture intrusion around the seals. We tune the receiver to the right frequency, replace antennas when needed, and program remotes on site.
Video Intercom
Video intercom at gate entrances is standard in many Gateway communities, especially the newer phases. When the screen freezes or the camera goes dark, it’s often a corroded PoE connector or a fried power supply from a lightning strike. We service residential video entry systems and can hardwire them so they hold up better in the humidity.
Phone Entry
Phone entry systems let residents buzz in visitors from their cell phones, but they fail when the cellular module loses signal or the backup battery dies during an outage. We replace modules, test signal strength for local carriers across 33973, and make sure the battery will actually keep the gate running when FPL power cuts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gateway
We carry parts for the brands most commonly installed across Gateway’s HOA communities: Linear, Viking, Ghost Controls, and DoorKing. Because Gateway was built to uniform specs, the same operator appears again and again across the neighborhood, and we keep boards, photo-eyes, loop detectors, and remotes for those specific models on hand. That means less waiting for an ordered part, and a faster return to a working gate.
Common Gate Access Control Problems We See in Gateway Homes
- Wind load cracking the hinge post weld. A solid infill gate catches wind like a sail. When a line of thunderstorms pushes through Gateway, the lateral force cracks welds at the hinge post, and you get a gate that binds against the rack and pinion and stalls the operator. We weld the crack on site, then reinforce the post so it doesn’t happen again.
- Saturated soil and sagging posts after hurricanes. Hurricane Ian dropped enormous rain that saturated the ground under Gateway’s gate posts. Once the soil softens, the post shifts, the gate sags, and the loop detector faults out. We dig out the footing, reset the post in concrete, and level the gate so the loop reads vehicles again.
- UV and salt air killing keypad ribbons. Southwest Florida sun is unforgiving on the thin ribbon cable inside keypad entry units. We see keypads that work all winter, then start refusing codes in April when the first heavy rains come. It’s almost always the ribbon cable. We replace it with a sealed connector that holds up.
- Circuit boards and photo-eyes failing after wind-driven rain. Even a few miles inland, Gateway sees Gulf-origin salt air that accelerates corrosion on control boards. When a board goes, the gate won’t respond or runs for five seconds and stops. We replace boards, realign photo-eyes, and install sealed enclosures where needed.
Pricing for Gate Access Control in Gateway, FL
Keypad entry replacement in Gateway typically runs $290 to $560, depending on whether it’s a basic keypad or a phone-entry-backed unit. Remote control programming starts around $95 to $175 for receiver tuning and programming. Video intercom repair runs $220 to $650 depending on the camera and power supply condition. Circuit board replacement on a slide gate operator is usually $380 to $780, including the part and labor. We quote the exact price before any work starts, and it doesn’t change at the door. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Gateway
In addition to all of Gateway, our crew serves Gateway neighbors in Lehigh Acres, Fort Myers Shores, Fort Myers, and Villas. If you’re on the edge of town or in a nearby HOA, call us and we’ll get you scheduled.
Serving Gateway, FL - Our Local Coverage Area
We’re based in the Gateway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Gateway
Most post-Ian gate failures in Gateway come from water intrusion and corrosion, not the outage itself. Ian’s rain and wind drove water into operator housings, keypad pedestals, and underground loop wiring. A board that survived the storm often fails weeks or months later once corrosion spreads across the circuit traces. If your power is back but the gate won’t open, shut, or responds erratically, call (877) 610-2993 and we’ll diagnose it. Estimates are free.
Every gate operator has a manual release mechanism, usually a handle or keyed access point on the side of the operator. On most LiftMaster, Linear, and DoorKing operators used in Gateway, you pull the release lever to disengage the motor, then push the gate by hand. We include the exact steps for your model after we service it. If you don’t know where yours is, call us and we’ll walk you through it safely. Don’t force the gate; a gate that’s stuck can have a fired motor or a failed gear, and forcing it can make the repair worse.
UL 325 is the federal safety standard for automatic gate operators. It means your HOA’s gate must have working photo-eyes, edge sensors, and a reverse-on-contact mechanism so the gate won’t close on a person or a car. In Gateway, HOAs are required to keep entrapment protection functioning, and a broken photo-eye or a misaligned sensor is a liability. We repair and re-certify entrapment protection for HOA gates across 33973. Call us for an inspection and a written quote.
Usually it’s the keypad’s ribbon cable or a weak relay at the operator, not the code itself. When the sun and salt air degrade the internal wiring, the keypad works intermittently: you enter the code from your side and it opens, but a delivery driver approaching from outside hits a dead button. We replace the ribbon cable with a sealed connector and test it under load. If the keypad is older than ten years, replacement is often cheaper than repair. Call (877) 610-2993 and we’ll tell you straight.
Yes. A gate sags in the hinge post, not in the middle. Once the post footing absorbs enough water and the post leans even a little, the gate drops at the free end and starts dragging or tripping the loop detector. We reset the post in new concrete, weld or bolt a reinforced hinge plate, and level the gate so it closes flush again. Don’t just push the gate back up, it’ll drop again within weeks.
Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate on gate access control repair or replacement anywhere in Gateway, FL. A live person answers, day or night.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Gateway since 2001.