Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Fort Worth
Gate access control in Fort Worth means keypads, intercoms, card readers and phone-entry systems that open the gate without you leaving the house. Most of the systems we work on run $380 to $2,900 installed, and the real issue in this city isn’t the electronics. It’s the clay. Fort Worth’s Blackland Prairie soil heaves posts out of plumb every spring, and a shifted post will kill a perfectly good access system faster than any failed circuit board. Hal Gatewood has been repairing and installing gate systems across Fort Worth since 2001, and he answers the phone himself at (877) 610-2993.
Key Takeaways
- Gate access control installation in Fort Worth typically runs $380-$2,900 depending on entry method, gate type, and wiring distance.
- Clay-shifted posts and corroded hinge points cause most access control failures in Fort Worth, not faulty keypads or motors.
- Video intercom and keypad repair on ornamental iron gates in older neighborhoods like Fairmount and Crestline is our most common call.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
- Every job carries the 90-Day Done Right Promise in writing. A live person answers calls at (877) 610-2993 around the clock.
Why Gatewood Fence & Gate Is Fort Worth’s Preferred Gate Access Control Company
Hal Gatewood puts his name on the shop and his cell number on the invoice. That’s not a marketing line. The address is published, the license number is something you can look up, and the person who answers at (877) 610-2993 is the same person who will show up in your driveway. In Fort Worth, that matters. This is a town where a handshake still counts, and where homeowner after homeowner has been quoted one price on the phone by some out-of-state outfit and then handed a different number at the door by a subcontractor who doesn’t care if he ever sees the street again.
We repair before we replace. When someone else’s crew swaps a $1,800 operator because a gate post has drifted two inches and a hinge is rust-frozen, that’s not repair, that’s waste. Hal will weld on site, reset the post if it needs it, and fix the actual problem. If it’s not done right, the 90-Day Done Right Promise means one call brings him back. No runaround, no “we’ll get someone out there next week.”
Fort Worth homeowners from River Crest to Wedgwood have seen the difference. Background-checked, uniformed crew members show up inside the window they gave you. They don’t leave cardboard coffee cups in your flowerbed. And when you call at 9 p.m. because a gate is stuck half-open and your grandkids are coming by in the morning, a live person picks up. Not a voicemail. Not a menu tree.
Our Gate Access Control Services in Fort Worth
Keypad Entry
Keypad entry is the workhorse for Fort Worth driveways, from mid-century ranch homes west of Hulen Street to newer HOA subdivisions filling in around 76108. A standalone keypad wired to an existing operator typically runs $380-$650 installed. The failure we see most often in Fort Worth isn’t a worn keypad membrane. It’s a post that has tilted just enough to change the gate’s travel arc, so the operator logic board reads a false obstruction and refuses the open command. We fix the post alignment first, then address the electronics. A gate sags in the hinge post, not in the middle, and that is where we start.
Remote Control
Adding or replacing remote access for a Fort Worth gate usually runs $180-$420 per remote, including programming for LiftMaster, Linear, and Viking receivers. Most Fort Worth callers want a wireless keypad at the gate plus two or three visor remotes. For gates inside neighborhoods with HOA-standardized hardware, we match the existing frequency and rolling-code protocol so the board doesn’t need replacing. Older systems without rolling-code security are worth upgrading, especially in busier east Fort Worth neighborhoods where signal cloning is more of a real concern than people assume.
Phone Entry
Phone entry systems let you buzz a car through from your cell, and they run $650-$1,600 installed in Fort Worth. The range depends on whether you want a cellular-connected unit or a landline bridge for an older gate system. These are common on larger lots along the Trinity Trails corridor and in estate neighborhoods like Monticello, where the gate can sit a hundred yards from the house. A cellular phone-entry unit means no trenching across a big yard, and we mount the antenna and power supply in a weather-sealed enclosure rated for North Texas heat (and the occasional February ice event).
Card Reader
Card readers for Fort Worth gates typically run $450-$1,100 installed, depending on whether you’re adding a standalone reader or integrating with an existing HOA or commercial access system. We install prox and Wiegand-compatible readers wired to operators from FAAC, BFT, and DoorKing. In Fort Worth’s 76108 and 76111 zip codes, we see a lot of multi-home private lanes where each resident gets a fob or card. We program the reader locally and show you how to add and remove credentials yourself. Price is quoted and agreed before any work starts, every time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Smart Access and Video Intercom for Fort Worth Gates
Smart access is where Fort Worth differs from Dallas or Houston suburbs. This city’s west-side neighborhoods, Crestline, Berkeley Place, Monticello, are full of 40 and 50-year-old ornamental iron driveway gates. Homeowners there want modern video intercom and smart access without tearing out the gate their parents installed. That’s the work we specialize in.
In Crestline, we realigned a twisted hinge post on a 40-year-old ornamental iron swing gate after the clay shifted it three inches out of plumb, then replaced the rust-frozen keypad entry housing with a LiftMaster Smart Video Intercom. Our crew reset the post footing below the frost line, welded new gussets to the bottom hinge, and calibrated the safety photocells so the gate now closes smooth against a sag correction without tripping the loop detector. That’s a Gatewood job. Fix what’s broken, upgrade what’s worth upgrading, leave the gate where it belongs: in the driveway, not the back of a truck.
Video intercom systems for Fort Worth run $850-$2,900 installed. The high end includes a camera at the gate, an app on your phone, and a monitor inside the house. On historic Fairmount and Ryan Place bungalows, we install compact video door-gate units with a matte black or bronze finish that doesn’t shout “new tech.” You get a clear view of who is at the gate, and the house keeps its look.
Smart access retrofits, adding app control, geofencing, or temporary guest codes, typically run $550-$1,400 when paired with an existing operator. We program systems from LiftMaster, Ghost Controls, and Mighty Mule. Before we touch anything, we check the post plumb and the hinge wear. A smart system on a sagging gate is a smart way to waste money. Show me the gate closing on its own and I’ll show you where it’s failing.
Trusted Brands We Service in Fort Worth
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Fort Worth customers, that means when an HOA-standardized FAAC slide gate operator faults out or a Viking swing gate gear drive seizes, the parts aren’t a week out. We keep common boards, remotes, photocells, and edge sensors for these brands in the truck and at the shop, and our supplier relationships across Tarrant County mean the oddball parts arrive fast. When a Fort Worth gate goes down, you don’t want to hear “we had to order it from somewhere.” You want it fixed. That’s the point of having a local shop with a real inventory.
Common Gate Access Control Problems We See in Fort Worth Homes
- Clay-shifted posts tripping the operator’s force sensor. Fort Worth’s shrink-swell clay heaves gate posts out of plumb every wet spring. A post that has moved even an inch can change the gate’s arc enough that the operator thinks something is blocking it and stops mid-cycle. The fix is post realignment, not a new logic board.
- Mineral scale on hinge and pivot points. Tarrant County’s moderately hard water leaves mineral scale on metal pivot points over time. That means jerky, noisy gate operation that wears out the rack and pinion gear. We clean and lubricate the pivots on every access control call, and we show you what to watch for.
- Ice damage from North Texas winter storms. Winter Storm Uri in February 2021 coated Fort Worth gates and operators in heavy freezing rain. Slide gate tracks iced over, hinge welds snapped, and gear-drive motors seized. If your gate took a hit that winter and has never run quite right since, have the post plumb and the gear drive checked before spending money on electronics.
- Rust-frozen keypad and intercom housings on older iron gates. In neighborhoods like Fairmount and Ryan Place, decades of uncoated rust plus a few Fort Worth freeze-thaw cycles can lock a keypad housing solid. We free the hardware on site, and if the housing is beyond saving, we weld a new mounting flange so the replacement fits clean and looks right.
Pricing for Gate Access Control in Fort Worth, TX
Here are straight numbers for Fort Worth’s market. A basic keypad entry install runs $380-$650. Remote control programming runs $180-$420 per remote. Phone entry systems run $650-$1,600 installed. Card readers run $450-$1,100. Video intercom and smart access retrofits run $550-$2,900 depending on features and gate type. Slide gates generally add $150-$400 over swing gates because the track, rollers, and limit setup take more time, especially on longer Fort Worth driveways.
What changes a price? Post realignment or welding adds $150-$500 depending on what’s needed. Long wiring runs from gate to house add $200-$600 with conduit and trenching. If you have an existing operator in serviceable shape, we won’t sell you a new one. We’ll tell you straight. Every price is quoted and agreed before any work starts. Not a penny appears on the invoice that wasn’t on the quote. Estimates are free. Call (877) 610-2993 and we’ll set a time. Standing offers apply: $40 off any repair over $200, no trip charge inside the county, and a standing 10% discount for seniors and veterans. That means veterans and seniors in Fort Worth never pay full price on the labor, ever.
We Also Serve Cities Near Fort Worth
Our Gate Access Control crew regularly runs calls to Gate Access Control in Fort Worth neighbors including River Oaks, Forest Hill, Haltom City, and Benbrook. Same real person on the phone, same 90-Day Done Right Promise, same published address and license number. The drive is short, and we don’t charge a trip fee inside the county.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Fort Worth
Because Fort Worth’s Blackland Prairie clay swells with spring rain and heaves the gate post out of plumb. The keypad itself is usually fine. The post shift changes the gate’s travel arc, so the operator’s safety logic sees the motion as irregular and refuses or kills the open command. We realign the post, then recalibrate the limit and force settings. That’s the fix. If your keypad acts up after every wet spring, call (877) 610-2993 and we’ll set it right in one visit.
Yes. Compact video intercom units in matte black or bronze finish mount cleanly on ornamental iron pickets without cutting the gate or spoiling its character in a historic neighborhood like Fairmount. We fabricate a matching mounting plate when needed and weld it on site. You get the camera and app access, and the gate still looks like it belongs on the street. Estimates are free, and the price is set before any work starts.
Yes, and most of our slide gate calls in Fort Worth come from either clay-shifted track posts or mineral-caked rollers. A slide gate runs on a straight track, so when the clay swells and tilts a track post, the gate drags or jumps the track and the access system’s limit logic errors out. Swing gates fail from hinge post shift instead. Either way, the access electronics are usually fine. The post is the problem. We check both before recommending any repair or replacement. For a straight answer, call (877) 610-2993.
UL 325 compliance means your operator has working external entrapment protection, usually photo eyes near the ground and a reversing edge on the gate leaf, plus a functioning force-relief system. If your HOA requires documentation, we inspect the operator, confirm the sensors and edges operate correctly, and give you a written compliance statement. On older systems where the safety edges have failed from Fort Worth freeze-thaw cycles, we replace them with new UL-listed components and certify the install. Call (877) 610-2993 to schedule an inspection.
Most solar gate openers on the market will not hold useful charge through five days of freezing overcast weather like Uri. The panels collect almost nothing, the battery’s cold-weather capacity drops hard, and the gate goes dead right when you need an exit most. For Fort Worth, we recommend hybrid systems: solar with a hardwired AC backup, or a larger battery bank with a low-temperature charge controller. If you want a gate that works in February ice, don’t rely on two small panels and a warm-weather battery. We’ll spec the right setup for your gate and your exposure. Estimates are free at (877) 610-2993.
Get a Free Estimate from Our Fort Worth Gate Access Control Team
If your keypad is dead, your gate is stuck half-open, or you want video intercom on an old iron gate in Fort Worth, call (877) 610-2993. A live person picks up. We’ll set a time, show up inside the window, and give you a written price before any work starts. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.