Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Dunwoody
Gate access control in Dunwoody runs between $450 and $2,800 depending on whether you need a simple keypad replacement or a full HOA-grade entry system with phone integration. Most repairs we handle are done same week, and we quote every price before any work starts so there’s no invoice shock at the end. If you’re managing a gated community off Ashford Dunwoody Road or a single-family home near the Perimeter, the likely culprit is aging equipment wired into operators that stopped being made 20 years ago. Call (877) 610-2993 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Dunwoody’s Preferred Gate Access Control Company
The first thing Dunwoody HOA boards and homeowners learn about us is that we actually answer the phone. Hal Gatewood has been doing this since 2001, and his name is on the shop and on every invoice. When a gate keypad fails at a subdivision entrance on Chamblee Dunwoody Road, the property manager doesn’t want a voicemail. They want someone who knows that the 1987 telephone-entry system is wired into an operator that DoorKing discontinued a decade ago and that the board itself has to be replaced, not patched.
We work Dunwoody’s older planned communities constantly. We know the brick and stone pilaster entries, the ornamental iron gates that still run on original hardware, and the HOA management companies that need a written scope of work before they’ll approve a repair. That familiarity means we show up already knowing what we’re walking into. We don’t burn a trip charge figuring out which direction the gate swings. And if something isn’t done right, our 90-Day Done Right Promise means one call brings us back. It’s in writing, not implied.
Our Gate Access Control Services in Dunwoody
We handle the full range of Gate Access Control work across Dunwoody, from single-family driveway keypads to full community entry systems with resident databases. Below are the main services we provide, with the local context that matters for this city.
Keypad Entry
Keypads fail in Dunwoody for two reasons: age and weather. Many of the original keypads installed in 1980s and 1990s HOA communities were never sealed properly against Georgia humidity, and the internal contacts corrode over time. We replace the keypad itself or, where the wiring has gone bad, run new low-voltage lines. A basic single-family keypad install in Dunwoody usually runs $450-$900. A pedestal-mounted HOA keypad with a new bollard that matches existing brick or stone runs $1,200-$2,200.
Remote Control
Resident remotes and commercial transmitters for Dunwoody gates can stop working when the receiver board degrades or the antenna gets damaged by a mower or a storm. We service remotes for every major brand, including LiftMaster, FAAC, Linear, and Viking. Sometimes the fix is a simple re-program. Other times the receiver needs replacement. A new receiver and reprogramming for an HOA gate in Dunwoody typically runs $350-$750.
Phone Entry
This is the big one for Dunwoody’s older communities. The 1980s and 1990s telephone-entry systems installed when these subdivisions were built used proprietary control boards that are no longer manufactured. When one dies, we can’t just drop in a $40 relay. The whole control board has to be replaced, and the resident phone list has to be migrated. We do that work on site. A full phone-entry retrofit for a Dunwoody HOA entrance gate runs $1,800-$4,500 depending on the number of residents and whether the old wiring can be reused.
Card Reader
Card reader access is common at Dunwoody’s office parks and corporate campuses along the Ashford Dunwoody corridor, plus a few residential communities that upgraded early. We install, replace, and service proximity card readers and key-fob systems, and we integrate them with existing operators so the gate still functions if the reader loses power. A standalone card reader install in Dunwoody runs $600-$1,400, plus programming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dunwoody
We’re certified to service nine major gate brands, and in Dunwoody we work most often on Viking, Ghost Controls, DoorKing, and Elite equipment. That’s not a random list. Those are the brands the original builders specified for Dunwoody’s HOA gates in the 1980s and 1990s, and they’re still what we pull out of pedestals off Mount Vernon Road and Tilly Mill Road today. Because we stock control boards, receivers, and safety-edge parts locally, we don’t wait on a distributor to ship from Texas. If the part exists and we don’t have it on the truck, we usually have it within a day.
Common Gate Access Control Problems We See in Dunwoody Homes
Dunwoody’s combination of 40-year-old HOA gates and North Georgia red clay creates a specific set of recurring access-control failures. Here’s what we see most often:
- Obsolete control boards killed by lightning or power surges. Older Dunwoody communities still run original 1980s telephone-entry boards that are no longer manufactured. A summer thunderstorm surge through the Perimeter area can fry one instantly, and the only fix is a full board replacement and database migration.
- Photocell misalignment from post heave. North Georgia red clay swells when wet and contracts when dry. Over decades, that soil movement tips hinge posts far enough that the safety photocells lose alignment, and the gate faults out every morning. The gate isn’t broken. The ground moved under it.
- Keypad buttons worn smooth by weather and sun. Dunwoody’s south-facing entry gates catch full sun all afternoon. The membrane keypads installed in the 1990s degrade and crack, and water gets in through the seams. A new weatherproof keypad solves it, but the pedestal mount may need re-anchoring to the pilaster at the same time.
- Ice-storm damage to slide-gate operators. When Atlanta gets a hard winter ice storm, older slide-gate track channels freeze solid. An operator left running against ice-locked gates burns out the drive motor or strips the rack-and-pinion gear. We replace those motors and gear sets regularly in late January and February across Dunwoody and the rest of Dunwoody.
Pricing for Gate Access Control in Dunwoody, GA
We don’t play the phone-quote game where the price changes when the tech shows up. The price we give you is the price you pay, agreed before any work starts. Here’s what gate access control work typically runs in Dunwoody:
| Service | Typical Dunwoody Price Range |
|---|---|
| Single-family keypad replacement | $450-$900 |
| HOA pedestal keypad with mounting hardware | $1,200-$2,200 |
| Remote receiver replacement and reprogramming | $350-$750 |
| Phone-entry control board retrofit (HOA) | $1,800-$4,500 |
| Card reader install with programming | $600-$1,400 |
| Smart access retrofit on existing operator | $800-$2,000 |
Two things affect your Dunwoody price most: whether the existing wiring can be reused and whether the HOA requires architectural review before hardware changes. Both are knowable before work starts, and our estimate covers them. Call (877) 610-2993 for a free written estimate, no trip charge inside Dunwoody.
We Also Serve Cities Near Dunwoody
In addition to our work throughout Dunwoody, we regularly run gate access control service calls to Sandy Springs, Chamblee, Doraville, and Brookhaven. If your community gate sits right on the city line, don’t worry about which side of the boundary you’re on. We cover it all from our local crews, and the same 90-Day Done Right Promise applies everywhere we go.
Serving Dunwoody, GA - Our Local Coverage Area
We’re based in the Dunwoody area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Dunwoody
Yes, in nearly every Dunwoody HOA we work with, any change to the physical hardware at the entrance gate requires architectural review board sign-off. The specific concern is usually aesthetic: does the new keypad pedestal or intercom housing match the original brick or stone pilaster style. We provide a written scope of work and photos of the proposed hardware so the board can review it without guesswork. We also coordinate start times with your management company so the work doesn’t conflict with scheduled maintenance. Call (877) 610-2993 if you need the paperwork started.
If it’s an original 1980s telephone-entry system wired into a no-longer-manufactured operator, the repair is a full control board replacement: the old board isn’t made anymore, and there’s no re-manufactured part that will drop in. We can often reuse the existing pedestal and wiring, which keeps the architectural review simpler and the cost lower than a ground-up replacement. A full phone-entry retrofit for a Dunwoody HOA gate typically runs $1,800-$4,500. Bring us the make and model if you can find it, and we’ll tell you straight what’s possible.
Usually not. What you’re describing is red clay soil heave tipping the hinge post, which misaligns the safety photocells and drops the gate into fault mode. Moisture makes the clay swell, which is why it happens when it rains. We fix the post first: we reset and re-plumb it, then re-anchor to the existing brick or stone pilaster, then realign the photocells. If the keypad itself has water intrusion, we replace it with a properly sealed weatherproof unit. But in Dunwoody, a sagging gate is a post problem until proven otherwise. Call (877) 610-2993 and we’ll check both.
In most cases, yes. Smart access retrofits connect to your existing operator’s control board and add phone-based entry through an app or a cellular bridge. It works with most brands we service, including LiftMaster, Viking, Ghost Controls, and DoorKing. A smart access retrofit on an existing Dunwoody HOA gate typically runs $800-$2,000 per gate. The one caveat: if your operator’s control board is already obsolete or failing, you’ll need that replaced first. We’ll tell you that on the estimate, before any money changes hands.
We’ve worked with enough Dunwoody management companies to know the pace of their approval cycles. The best move is to call us first for a diagnostic: we’ll document the failure, write up the repair scope, and give you photos and part numbers the board can approve quickly. Often the delay isn’t the board itself; it’s that the request came in without enough technical detail. We provide that detail. For emergency access failures where the gate is stuck open or stuck closed, we can often get temporary repairs approved faster because we document the security risk plainly.
Contact Us for Gate Access Control in Dunwoody, GA
If your Dunwoody community gate is down, the residents already know. Someone is calling the management company today. Get ahead of it. Call (877) 610-2993 and you’ll talk to a live person, not a voicemail tree. We’ll schedule a diagnostic, write up the scope for your HOA if needed, and quote the full price before any work starts. Hal Gatewood has been repairing gates since 2001, and his name is on the shop and on every invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dunwoody since 2001.