Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Crestline
If you’re searching for gate access control in Crestline, you’ve probably got a keypad that quit after the last storm, a phone entry system that won’t ring through, or a gate a bear decided to remodel. Gatewood Fence & Gate handles all of it. We’ve been fixing gates and access systems in mountain communities since 2001, and we know what 4,600 feet of elevation does to electronics, hinges, and concrete. No call center, no runaround. Call (877) 610-2993 and a live person answers, day or night. Hal Gatewood’s name is on the shop, and his crew knows the roads up here.
Why Gatewood Fence & Gate Is Crestline’s Preferred Gate Access Control Company
Most gate companies in Southern California learn their trade on flat lots in tract-home neighborhoods. Crestline isn’t that. Steep driveways, angled lots, freeze-thaw cycles that heave concrete, and black bears that treat a closed gate like a challenge. We’ve been working in and around Crestline long enough to know which keypads survive snow cover and which operators burn out when a bear bends a hinge post. That local knowledge saves you money because we fix the real problem the first time, not the symptom.
Every job we do in Crestline carries our 90-Day Done Right Promise in writing. If something’s not right, one call brings Hal back. That’s not a marketing line. That’s how an owner-operated shop works. We also answer our own phone, 24/7, with a live person. Not a voicemail, not a chatbot. You’ll get a straight answer, often from Hal himself, and a time window we actually honor.
We publish our address and license number. We service nine major gate brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. And we weld on site, so your gate stays in your driveway while we fix it. No hauling it off to some shop in the flatlands for a week.
Our Gate Access Control Services in Crestline
We handle the systems that let you in and keep everyone else out. In Crestline, access control means more than punching a code. It means systems that work after two feet of snow, through power dips, and after a bear decides to test your hinges. Here’s what we install, repair, and retrofit.
Keypad Entry
A keypad that won’t energize is the most common call we get from Crestline homeowners each winter. Often the problem isn’t the keypad itself. It’s the conduit pulled off level by freezing ground, or a control board that lost its programming after a power dip. We diagnose the whole circuit, not just the box on the post. A typical keypad entry repair in Crestline runs $165 to $340, and a new keypad installation runs $420 to $780 depending on access and whether we’re tying into an existing operator.

Phone Entry
Phone entry systems let you buzz someone in from your cell whether you’re home or not. For Crestline’s weekend cabins and part-time residents, that’s a game changer. We retrofit older gates with phone entry regularly, and we’re careful about mounting hardware. A phone entry system installed in Crestline runs $850 to $1,600, including the unit, mounting, programming, and tying into your gate operator.

Card Reader
Card readers are popular with Crestline homeowners who have guests or renters coming and going. The reader itself rarely fails. What fails is the wiring behind it, especially on old wood gates where the mounting surface has rotted or shifted. We rebuild the mount, replace the wiring, and the reader works again. Card reader service and replacement runs $200 to $550 in Crestline.

Video Intercom
You want to see who’s at the gate before you open it. That’s especially useful up here where driveways curve through trees and you can’t see the gate from the house. Video intercom systems for Crestline typically run $1,200 to $2,400 installed, including the monitor, camera unit, and integration with your existing gate operator. We also add video to existing phone entry systems when you just want eyes on the gate without a full rewire.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crestline
We’re set up to work on FAAC, BFT, Linear, and Viking equipment, along with five other major brands. We keep common control boards, keypads, safety edges, and photocells stocked for Crestline customers, which means less waiting on a part to ship from a warehouse. When we see an obsolete board that costs more to repair than replace, we’ll tell you plainly. Hal would rather sell you what actually works than patch something that’ll fail again in three months.
Common Gate Access Control Problems We See in Crestline Homes
- Dead keypads after winter storms. Power dips and moisture intrusion kill older control boards. The keypad looks fine, but the board behind it lost its programming or fried entirely.
- Rotted wood frames shifting the keypad or card reader. Most Crestline gates built before the 1980s are wood-framed. When snow sits on the frame and rot sets in, the mounting surface moves, wires get pulled, and entry systems go intermittent.
- Bears forcing gates off hinge posts. Every spring we see a pattern. A bear pushes against a gate near Lake Gregory, bends the hinge post, and suddenly the gate operator is fighting misalignment. That burns out motors and strips rack and pinion systems.
- Obsolete operators that can’t be programmed anymore. Old LiftMaster and Viking boards from the 1990s and early 2000s simply can’t hold programming after repeated power interruptions. Retrofitting a new board often costs as much as a new operator.
Pricing for Gate Access Control in Crestline, CA
You deserve real numbers, so here they are. Keypad repair in Crestline typically runs $165 to $340. A new keypad installation runs $420 to $780. Phone entry installation runs $850 to $1,600. Video intercom systems run $1,200 to $2,400. Card reader service runs $200 to $550. Full operator replacement, when the old one can’t be saved, runs $1,100 to $2,800 depending on the gate’s size and whether we need to reset posts or repair weld damage.
What changes the price? Steep lots mean more labor getting equipment into place. Frost-heaved posts mean concrete work. A bear-bent hinge means sag correction before anything else. That’s why we quote everything before any work starts. You agree to the price, we do the job. Free estimates, no trip charge inside the county, and we’ll give you a free second opinion on any written estimate from another company. Seniors and veterans always get 10% off, and any repair over $200 gets $40 off.
We Also Serve Cities Near Crestline
Our Gate Access Control work takes us across the mountain communities and down into the foothills. Beyond Crestline, we regularly serve Lake Arrowhead, Muscoy, San Bernardino, and Highland. Same owner, same 90-Day Done Right Promise, same live person answering the phone.
Serving Crestline, CA - Our Local Coverage Area
We’re based in the Crestline area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Crestline
This is the classic Crestline double hit. The snowstorms cause power dips that wipe out programming on older control boards, and the freeze-thaw cycle heaves the conduit pulling your keypad’s wiring slightly loose. Then a bear forces the gate against the hinge post, misaligning the operator, and the whole system goes down. We start by checking the board’s power and programming, then inspect the post for heave or bend. Fix the post first, then the electronics. Call (877) 610-2993 and we’ll walk you through what we’ll check before we even arrive.
Yes, and we’ve done it many times in Crestline’s older cabin neighborhoods. The gate itself usually needs hinge work and often sag correction at the post, but the wood doesn’t have to be replaced just to add modern access control. We mount the phone entry unit on a reinforced plate, run new flexible conduit, and tie into a new or existing operator. The price stays in the $850 to $1,600 range unless the gate structure itself is failing. We’ll tell you before we start if the post is too far gone to save.
Because the gate isn’t tracking straight. On sloped lots around Lake Gregory, freeze-thaw ground movement shifts the track or the posts slightly every winter. The gate still opens, but it’s dragging, and the operator’s rack and pinion takes the abuse. Eventually the gear strips. The fix is to reset the track and posts level and square, then replace the stripped gear. If we just swap the gear without correcting the alignment, you’ll be replacing it again next year. That’s exactly the kind of callback we’re trying to prevent with the 90-Day Done Right Promise.
Mostly, but it depends on the panel placement and battery condition. Crestline’s winter sun angle is low, and snow can bury a panel for days. If your property has heavy tree cover, a solar panel may not keep up in January. We usually recommend a solar setup with a solid battery reserve, or a hybrid system that can trickle from grid power when the panel’s covered. The panel also needs to be mounted where snow comes off easily. A solar opener installed in Crestline typically adds $300 to $600 to the operator cost. We’ll look at your sun and shade before recommending anything.
If we’re only repairing the keypad and existing control board, we’re not legally required to bring the whole gate up to current safety standards. But if we’re replacing the operator or the control board, UL 325 requires safety entrapment protection, which means photocell sensors or an inherent reversing mechanism, plus safety edges where needed. We’ll tell you exactly what’s required for your specific job before any work starts. The price for adding safety photocells and a loop detector in Crestline runs $250 to $500 on top of the primary repair. Call (877) 610-2993 and we’ll explain what applies to your gate.
Talk to a Real Person in Crestline
If your gate access control is acting up in Crestline, don’t wait for the next snowstorm or the next bear to make it worse. Call (877) 610-2993 today. You’ll get a live person, a straight answer, and a time window we actually keep. Free estimates, no trip charge inside the county, and the price is agreed before any work starts. Hal Gatewood’s name is on the shop, and the 90-Day Done Right Promise is on every invoice. That’s how we’ve done business since 2001, and that’s how we do it in Crestline.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Crestline and the surrounding San Bernardino Mountains.





Before
After
Before
After
Before
After