Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Beaverton
If your Beaverton gate keypad died after a rainy week, or your HOA’s 1990s slide gate operator won’t respond from the call box, here’s the straight answer: most of what fails on Beaverton gate access systems can be repaired same-visit, and a new keypad, receiver, or retrofit usually runs $250 to $1,100 installed. We’re Gatewood Fence & Gate, Hal Gatewood owns and runs the shop, and we’ve kept gates opening across Washington County since 2001. Our Gate Access Control team answers the phone 24/7, and we come to Beaverton regularly enough that your gate gets looked at by someone who has already fixed three just like it this month. Call (877) 610-2993 and you’ll talk to a live person who can quote it straight.
Why Gatewood Fence & Gate Is Beaverton’s Preferred Gate Access Control Company
Beaverton is different from Portland. The gate work here isn’t scattered single driveways in old neighborhoods. It’s HOA entrances off Murray, Cedar Hills, and the subdivisions that filled in around Nike and the tech corridor during the 1980s and 90s. Those gates are now 25 to 40 years old, and they’re failing in patterns we know well. Corroded control boards, sagging posts in Willamette Valley clay, and keypads that hold water after the long wet season. We see it every week in Beaverton, and that repetition means we carry the right parts on the truck instead of guessing.
Hal’s name is on the shop and on every invoice. The address is published, the license number is public, and if a job isn’t done right, the 90-Day Done Right Promise is in writing. Not “up to” 90 days, not “in most cases.” 90 days, one call, he comes back. Beaverton homeowners, especially the HOA board members we work with, want to know the person quoting the work is the same person who will stand behind it. That’s exactly how this company runs. The person who shows up for Gate Repair in Beaverton is background-checked, in uniform, and answers to Hal directly.
One more thing that matters in Beaverton: scheduling around HOA board approvals. We quote it, the board votes, we schedule it. We’ve done enough of those loops to know how to write an estimate that board members can actually understand and act on.
Our Gate Access Control Services in Beaverton
Access control is not one product. It’s whatever lets the right people in and keeps everyone else out: keypad, remote, phone, card reader, video, smart app. In Beaverton, most of our calls are HOAs trying to keep a 25-year-old gate functional while figuring out what can be modernized without tearing the whole thing out. Here’s what we handle most.
Keypad Entry
Beaverton’s wet months are hard on keypads. Water gets behind the faceplate, corrosion eats the contacts, and the HOA’s 40-year-old code stops working. We replace keypads, add surge protection, and if the keypad talks to a legacy operator from the 1990s, we check the wiring at the post before declaring the keypad dead. A new keypad in Beaverton typically runs $250 to $600 installed, depending on whether it’s a simple standalone pad or one wired into a multi-user HOA controller.

Remote Control
When every clicker in the subdivision quits on the same morning, it’s almost never the remotes. It’s the receiver board, or a loop detector that stopped sensing, or an operator that lost its programming after a power blink. We test the receiver at the gate first, then match compatible remotes. We stock receivers and remotes for Linear, Viking, DoorKing, and others, so a Beaverton HOA gate isn’t down for a week waiting on a part from a warehouse.

Phone Entry
For Beaverton gates where guests buzz a property or call box, phone entry means voice calls, directory updates, and occasional reprogramming. We set up and repair phone entry systems, and we walk board members through the directory so it’s not one person’s spreadsheet. Phone entry retrofits on a legacy operator are common in the 97006 to 97008 ZIPs, where the gate itself may be fine but the call box is original to the 1990s and full of dead relays.

Card Reader
Card readers at Beaverton HOA gates get the same weather abuse as keypads. We install proximity readers, reprogram cards, and tie them into newer access control panels. If your reader is wired to an operator older than modern safety standards, this is often the moment to consider Beaverton Gate Installation and upgrade the whole package rather than patch one more failing part.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beaverton
We service and stock parts for the brands Beaverton HOAs actually run: Linear, Viking, DoorKing, and Ghost Controls among them. If your gate has a LiftMaster or FAAC operator from the 1990s, we know those too, and we can tell you within a ten-minute inspection whether the board can be saved or whether you’re better off putting that money toward a Gate Motor & Opener - Beaverton upgrade that meets current safety rules. For Beaverton customers, stocking those parts locally means less downtime. No waiting a week for a board to ship across the country while the gate sits open.
Common Gate Access Control Problems We See in Beaverton Homes
- Corroded 1990s control boards. Condensation from Beaverton’s wet October-through-May season gets into legacy LiftMaster and FAAC boards and shorts them out. After a long winter, HOA slide gates just sit dead. We diagnose the board on site and quote the repair or replacement honestly.
- Sagging swing gates in clay soil. Willamette Valley clay holds water, and a saturated hinge post shifts enough to make a swing gate drag, trip loop detectors, or tear wiring at the footing. We fix the post first, not the panel.
- Legacy operators lacking safety photocells. Operators original to 1990s construction often predate modern UL 325 entrapment protection rules. When we find one during a Beaverton service call, Washington County’s permitting process usually means a full operator replacement, not a simple board swap.
- Keypad water damage. Keypads on southwest-facing gate posts take direct rain, and the constant Beaverton drizzle works its way into the housing. We replace them and seal the install so you’re not back in the same spot next winter.
Pricing for Gate Access Control in Beaverton, OR
Here are real numbers for the Beaverton market, not vague ranges you’d find on a national site. Keypad replacement runs $250 to $600 installed. A basic remote receiver swap is $180 to $450. Phone entry and card reader retrofit work typically runs $600 to $1,600, because it often includes a new control panel or wiring cleanup. Full access control upgrades around an operator replacement, like our Murray Boulevard job, run $2,000 to $4,500. Every price gets quoted and agreed to in writing before any work starts. No trip charge inside the county, a free second opinion on any written estimate, and $40 off any repair over $200. Seniors and veterans always get 10% off. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Beaverton
If your gate is just outside Beaverton, we cover Cedar Hills, Raleigh Hills, West Haven, and West Haven-Sylvan with the same same-day response. The crew serving Beaverton works these neighborhoods weekly, so the scheduling is usually quick and the drive is short. Dispatch and scheduling coordinate from our Portland office, but the crews live in this corridor and know the gates.
Serving Beaverton, OR - Our Local Coverage Area
We’re based in the Beaverton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Beaverton
Probably not, and we won’t try to sell you one. A dead keypad after rain usually means water in the keypad housing or a corroded wire at the post. We replace the keypad or repair the wiring first, test the operator, and only quote a new operator if the existing one has genuinely failed. Call (877) 610-2993 and we’ll give you a straight answer, with a free estimate.
In many cases, yes. A 1990s FAAC slide gate can often be retrofitted with a new access control panel, video intercom, and smart access, provided the operator’s motor and rack are still sound. What often kills the retrofit is the safety side: if the operator predates UL 325 and lacks photocells, Washington County will require the safety upgrade as part of the permit, and at that point a full operator replacement may cost less than piecing it together. We give you both numbers up front.
It’s the hinge post, not the panel. Beaverton’s wet clay holds water all winter, and a saturated post shifts subtly until the gate drags and the opener struggles. We fix the post footing first. Fix the panel without the post and you’ll fix it twice. Call (877) 610-2993 and we’ll come look at it in person.
In a shaded southwest Beaverton neighborhood, a solar opener is usually a bad bet. Beaverton gets roughly 37 to 38 inches of rain a year and long stretches of overcast winter days, and a shaded panel produces nowhere near enough power to keep an HOA gate cycling reliably. We’re honest about this before you spend money. A hardwired operator with battery backup is the better answer in most 97008 locations.
If it still works and has functional safety photocells and an edge sensor, you can keep running it. Here’s the catch: most 1995 LiftMaster operators predate UL 325 entrapment protection, and Washington County won’t allow an operator swap or major access control upgrade without bringing the safety side up to current code. If the board dies or the county gets involved, continuing to patch it usually costs more than replacing it. We’ll show you exactly what condition your unit is in and what the county will require, before you commit to anything.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beaverton since 2001.





Before
After
Before
After
Before
After