Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lake Shore
Gate installation in Lake Shore, MD runs between $1,800 and $9,600 for most residential jobs, and the work is scheduled after a free on-site measure and written quote. We serve the entire 21122 ZIP, from the waterfront lots along the Magothy River to the quiet inland streets off Mountain Road. If your gate is sagging, failing to lock, or the opener stopped responding, call (877) 610-2993 and a real person answers, not a voicemail.
Hal Gatewood started this company in 2001 and he still runs it himself. When we quote a gate installation in Lake Shore, the price you see on paper is the price you pay. No surprises at the door. No backpedaling. We show up in the window we promise because our name is on the shop and the shop is down the road.
Most of the calls we get in Lake Shore are for older gates hung before modern safety requirements existed. Some can be retrofitted. Some should be replaced. We’ll tell you honestly which one you’re looking at, and why.
Key takeaways:
- Driveway gate installation in Lake Shore typically runs $2,400 to $8,900 depending on material, size, and automation.
- Salt air from the Chesapeake Bay and Magothy River corrodes gate openers here three times faster than inland Anne Arundel County.
- Free estimates, written upfront pricing, and the 90-Day Done Right Promise in writing on every job.
- Call (877) 610-2993 any time. A live person answers. Every time.
Why Gatewood Fence & Gate Is Lake Shore’s Preferred Gate Installation Company
Lake Shore is not a generic suburb. Homes here sit on a peninsula between the Magothy River and the Bay, and the air carries salt nearly year-round. That changes how gates wear, how openers fail, and what kind of hardware and sealing you need on day one. A company that installs gates in Crofton or Millersville and treats Lake Shore the same way will be back in three years replacing a control board that should have lasted a decade. We’ve been doing Gate Installation on waterfront and near-waterfront properties in Anne Arundel County since 2001, so we build for the salt from the start.
Lake Shore homeowners have called us after national outfits quoted one price on the phone and handed over a different invoice at the door. That doesn’t happen with us. The price Hal gives you is the price you pay. He publishes his address. His license number is easy to look up. He’s been at this 29 years and his name is on every invoice.
Our crew has installed and repaired gates on Mountain Road, off Lake Shore Drive, along Woods Road, and in the small neighborhoods tucked between the river inlets and Bay tributaries. We know the housing mix here: 1970s and 1980s ranches inland, older waterfront cottages, and newer upscale builds along the shoreline. Each one needs a different approach to the frame, footings, hardware, and automation. We look at the specific site before we quote anything.
Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. We don’t run from our work.
Our Gate Installation Services in Lake Shore
Driveway Gate Installation
Driveway gate installation in Lake Shore usually means an aluminum or ornamental iron gate on a standard residential lot, or a heavier estate-style double gate on a waterfront property. The Bay and river salt mean we spec marine-grade hinges, coated hardware, and sealed operator enclosures as standard practice on every near-water lot. A typical single driveway gate in Lake Shore runs $2,400 to $5,800 installed, including the operator. Boardwalk-style or double gate layouts run higher, from $5,500 to $9,600.
Pedestrian Gate Installation
A pedestrian gate in Lake Shore is often the side entrance off the driveway or a gap in an existing fence line. We match the new gate to your existing fencing so it doesn’t look bolted on as an afterthought. Pedestrian gates with a basic latch and two hinges start around $800 and run to $2,200 when you add a keypad lock or intercom tie-in. In waterfront sections where salt spray drifts across the yard, we push for powder-coated aluminum over raw steel every time. It costs a little more up front and saves years of rust repair.
Sliding Gate Installation
Sliding gate installation in Lake Shore works well for waterfront properties with short driveways or steep slopes where a swing gate would bind against the grade or a seawall. A single sliding gate with a rack-and-pinion operator runs $3,800 to $7,400 here. The salt-laden condensation that collects inside slide operator housings is the single biggest reason we see premature motor failure in the 21122 ZIP. We always seal the enclosure with marine-grade gasketing and check that the rack teeth are aligned so the gate doesn’t grind itself down in year one.
Swing Gate Installation
Swing gate installation in Lake Shore is the most common request, and the most common failure we’re called to fix. Freeze-thaw cycles in the clay-heavy soils around the peninsula shift post footings every winter. A swing gate that sags doesn’t sag in the panel, it sags in the hinge post. We set posts in high-strength grout at a depth that accounts for Lake Shore’s frost line and drain the post caps so water doesn’t sit inside. A single swing gate with automation runs $2,600 to $6,200 installed here. Double gates run $4,800 to $9,600 depending on width, material, and whether we’re reusing existing columns or pouring new ones.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Shore
We’re certified to install, program, and service nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing. Lake Shore homeowners call most often with Linear and LiftMaster operators, and we keep common service parts and replacement boards in local stock so you’re not waiting on a warehouse shipment from three states away. Viking and DoorKing openers are common on older estate gates along the Magothy, and we retrofit those regularly with modern safety edges and loop detectors that meet current code.
Common Gate Installation Problems We See in Lake Shore Homes
These are the failure patterns we see over and over around the 21122 ZIP. If any of them sound familiar, the gate is telling you something.
- Rust-jacked hinge posts on 1980s and 1990s swing gates. Years of salt spray wick down the post, the footing spalls, and the whole post shifts out of plumb. The panel looks fine. The post is done. Fix the panel without the post and you’ll fix it twice.
- Corroded control boards in three- to four-year-old automatic openers. On waterfront streets, the board inside a LiftMaster or FAAC housing shows green corrosion across the relay contacts long before the motor fails. Inland technicians almost never see this before year ten.
- Seized rack-and-pinion slides on waterfront lots. Condensation builds inside the motor housing, salt coats the rack teeth, and the gate stops mid-travel. A simple clean and alignment fixes it early. Ignored for a season, the motor burns itself out fighting the resistance.
- Double gates hung before current safety code without working photocells. They open fine. But the original control board has no entrapment-protection input. You can retrofit the beams, but the board itself may need replacing to accept them. We’ll trace that for you before we quote anything.
Pricing for Gate Installation in Lake Shore, MD
Here is what gate installation in Lake Shore actually costs in 2026. These are real ranges, not “call for pricing” placeholders.
| Gate Type | Typical Lake Shore Range |
|---|---|
| Pedestrian gate, basic latch | $800 - $2,200 |
| Single driveway swing gate, automated | $2,600 - $6,200 |
| Single sliding gate, automated | $3,800 - $7,400 |
| Double driveway gate, automated | $4,800 - $9,600 |
| Existing gate + new operator retrofit | $1,400 - $3,300 |
What moves the price is the width, the material, whether we’re pouring new footings or reusing existing columns, and whether the old gate can be retrofitted or needs replacement. The quote is written, the price is locked, and you agree before we start any work. No trip charge inside the county. Free estimates. Call (877) 610-2993 and we’ll set a time to come out, measure, and put it on paper.
We Also Serve Cities Near Lake Shore
We work across the upper Anne Arundel peninsula, so if you’re in Riviera Beach, Severna Park, Arnold, or Green Haven, the same crew and the same pricing apply. Most of our Lake Shore customers find us after a neighbor up Mountain Road or across the river in Lake Shore recommended us. Word of mouth is how we built this shop, and it’s still how we work.
Serving Lake Shore, MD - Our Local Coverage Area
We’re based in the Lake Shore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lake Shore
Because salt. Your LiftMaster is breathing air saturated with Chesapeake Bay and Magothy River salt, and that air condenses inside the operator housing every time the temperature swings. The terminal block is just the first place the corrosion shows visibly. The fix is not a new motor. It’s sealing the enclosure with marine-grade gasketing, adding a vented desiccant pack, and running a sealing pass over the terminal connections. In waterfront Lake Shore, we do this as standard on every new operator install. Call (877) 610-2993 if your unit is showing green fuzz on the terminals, and we’ll inspect the whole board before it fails.
In most cases, yes. The gate panel itself is often in workable shape, especially if it’s been painted and maintained. What fails on 1980s Lake Shore gates is the hinge post and the operator, not the panel. We can re-set the post in high-strength grout, replace the hinges with marine-grade versions, and install a new LiftMaster or FAAC operator with modern safety photocells and a current keypad. You keep the gate you like. You replace only what’s actually worn out. We’ll give you that written answer after we inspect the post and the hinge welds. Free estimate, no trip charge inside the county.
Current UL 325 code requires functioning entrapment protection on any automatic gate, which means working photocells or contact edges at every pinch point and a gate that reverses when it meets resistance. Older double gates from the 1990s often lack the control board inputs to accept photocells. The answer is a new control board or a full operator replacement, depending on what’s there. We’ll trace your existing wiring and tell you exactly what needs to be added or changed. The safety components are not optional, and we won’t install an automatic opener without them.
Because freeze-thaw cycles shift the gate track or the post footing over the winter, and the rack teeth fall slightly out of alignment with the pinion gear. In March the ground thaws, the footing settles a fraction of an inch, and the gate binds. The long-term fix is re-setting the track or post so it doesn’t move, then greasing the rack with a marine-grade lubricant twice a year. Ignoring it will eventually strip the rack or burn out the operator motor. Call (877) 610-2993 and we’ll come check the alignment before it gets worse.
Yes. If your gate operator is within a block of the water, the salt air will find it. Sealing the enclosure with marine-grade gasketing, adding a desiccant pack, and lubricating the moving points with a corrosion-inhibiting grease will add years to a FAAC unit that would otherwise start rusting inside by year three. We do the sealing pass as part of a new install on waterfront properties, and it’s also a short service call we can perform on an existing unit. The alternative is replacing the board and motor housing far sooner than the manufacturer intended.
Contact Gatewood Fence & Gate
If your gate is sagging, sticking, or the opener is dead, call (877) 610-2993. A live person answers, day or night. We’ll set a time to come out to Lake Shore, measure the site, and hand you a written price before any work starts. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every install. Hal Gatewood’s name is on the shop. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lake Shore since 2001.