Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lighthouse Point, FL
Gate repair in Lighthouse Point typically runs $165 to $1,800 depending on whether you’re dealing with a seized hinge or a full pilaster rebuild with a new operator. What makes this city different is simple: virtually every driveway gate here sits within yards of salt water, and that changes what fails and how we fix it. If your gate won’t open, sags at the latch, or the motor quit after the last storm, call (877) 610-2993 and a live person picks up day or night.
Why Lighthouse Point Homes Are Different
Lighthouse Point is a peninsula threaded by finger canals off the Intracoastal, which means the salt-laden air isn’t something that occasionally blows through. It’s the constant environment. Standard zinc-plated hinges, brackets, and fasteners fail here two to three times faster than they do even a mile west in inland Broward. We replace them with marine-grade stainless or galvanized components as the baseline, not an upgrade.
The housing stock makes the work even more specific. Most canal-front homes were built between the 1950s and 1970s, when the canal network was dredged and platted. Many still have their original ornamental wrought-iron swing gates mounted on masonry pilasters. Those pilasters often hold rebar that has been rusting for sixty years, quietly spalling the concrete from the inside. A gate that sags at the latch is frequently a post problem, not a hinge problem. On the newer estate builds east of North Federal Highway, we see high-end automated slide gates where the electronics and operators sit close to grade and face real flood risk during hurricane season.
Gate Repair in Lighthouse Point
Gate repair in Lighthouse Point usually costs between $165 and $1,800 depending on whether we’re talking about a hinge replacement or a full post rebuild with a new operator. Most repairs we handle are done the same day we show up. We know these canal-front properties, the salt that eats hardware, and the mid-century pilasters that hide failing rebar. The price is quoted and agreed before any work starts, and that number holds. For a deeper look at what a repair involves, see our Gate Repair page.
Electric Gate Repair
Electric swing and slide gates fail in Lighthouse Point for reasons you won’t find ten miles inland. Salt-laden air from the finger canals works its way into operator enclosures, corrodes terminal blocks, and bridges connections on control boards. We open the operator, test the input and output circuits, and replace what has actually failed, not the whole unit because it’s easier. An electric gate repair here, including diagnostics and a replacement board or limit switch, ranges from $280 to $850.
Hinge & Post Repair
This is the most common call we get in Lighthouse Point, and it’s usually misdiagnosed by the last guy who came out. A gate sags in the hinge post, not in the middle, and that’s where we start. On mid-century canal-front homes, the pilasters were poured when the canals were dredged in the 1950s and 60s, and the rebar inside has been rusting ever since. You can’t hang a 400-pound gate on crumbling concrete and expect it to hold. A hinge pin or hinge replacement runs $165 to $390 depending on the gate’s weight and the number of hinges. A full post rebuild with a galvanized-reinforced core on a canal-front pilaster starts around $1,100 and can reach $1,800 with a new operator installed.
Gate Realignment
Gates in Lighthouse Point fall out of alignment because the ground shifts, hinges wear, and the cantilevered weight of an ornamental swing gate slowly pulls everything forward. In July, a heavy bespoke gate expands in the South Florida sun and binds against its latch or the operator’s stops. We re-level the gate, shim and replace hinge pins as needed, and reset the operator’s open and close limits so the gate seats cleanly. Gate realignment with operator limit reset runs $180 to $450, and a weld repair including grinding and repainting typically lands between $220 and $600.
How much does gate repair cost in Lighthouse Point?
Most common fixes like hinge replacement, latch work, or a motor capacitor run between $165 and $480. Larger jobs such as a full operator replacement or pilaster rebuild range from $1,100 to $1,800. We quote the price before any work starts, and that price holds. Call (877) 610-2993 for an exact quote, estimates are free.
Why does my automatic gate need repair every couple of years while my friend’s gate inland is fine?
Because your gate sits within yards of finger canal salt water, and that airborne salt corrodes terminals, control boards, and standard zinc-plated hinges at two to three times the rate seen in inland cities. Unless every fastener and component is marine-grade or galvanized, something fails every couple of seasons. We use those materials as the baseline on every Lighthouse Point job.
Gate Installation in Lighthouse Point
A new driveway gate in Lighthouse Point usually starts around $2,800 for a basic single swing gate and runs $6,000 to $15,000 for a full double swing or sliding gate with automation. The pilaster condition and salt-corrosion factor drive the number more than anything else. We schedule a free measure within a few days of your call, and every price is quoted and agreed before steel gets cut. Full details live on our Gate Installation page.
Driveway Gate Installation
Driveway gates on Lighthouse Point canal lots typically run $4,200 to $12,000 installed, including fabrication, posts, and the automation package. Salt-laden air from the Intracoastal means we frame everything with galvanized steel and use marine-grade stainless hinges and fasteners as the baseline, not an add-on. Double-gate jobs at estate-scale properties on the wider lots east of North Federal Highway are our most common new installation, and each one includes safety edges and photo eyes wired to code before we call it done.
Pedestrian Gate Installation
A matching pedestrian gate beside the driveway keeps deliveries and workers from walking through your open vehicle gate, which matters on Lighthouse Point’s busy street sides. These run $900 to $2,400 for a welded aluminum or steel frame with a quality latch and self-closing hinge. We match the picket design to your existing driveway gate or fence line and powder-coat it to hold up against the constant salt humidity.
Sliding Gate Installation
Sliding gates make sense on Lighthouse Point properties where a swing gate would arc over the sidewalk or into landscaping, which happens often on narrower canal-side lots. A single sliding gate with a track or cantilever system and operator starts around $5,500 and goes to $13,000 depending on the length and the operator you choose. Hurricane season is a factor here: we set operators and control boards above grade where possible and use sealed enclosures, because storm surge in low-lying areas puts ground-level electronics at direct flood risk.
How quickly can you install a new gate in Lighthouse Point?
Most Lighthouse Point gate installations are measured within two to four business days and installed within one to three weeks, depending on fabrication and whether pilasters need work first. If you need a repair on an existing gate, we can usually get to you same day or next day. Call (877) 610-2993 for a free measure and a written schedule before you commit.
Does salt air really affect gate hardware in Lighthouse Point?
Yes, and Lighthouse Point gets it worse than most of Broward because the city is threaded with finger canals on three sides, so nearly every driveway sits within yards of salt water. That’s why we use galvanized frames, marine-grade stainless fasteners, and powder-coat finishes as standard here. If your gate is rusting at the hinges after just a few years, that’s the salt, not a defective hinge.
Gate Motor & Opener in Lighthouse Point
A gate motor in Lighthouse Point fails for reasons that don’t apply ten miles west. The salt-laden air rolling off the finger canals attacks control boards, terminal strips, and mounts in ways that surprise homeowners who moved here from inland Broward. If your opener is phantom-cycling at odd hours, straining against a sagging gate, or just quit entirely, call (877) 610-2993. More detail is on our Gate Motor & Opener page.
Motor Repair
Most calls we get in Lighthouse Point start with a gate that’s reversing for no reason, phantom-cycling at 3 a.m., or refusing to close completely. Nine times out of ten, the operator board has corrosion on the relay contacts or terminal strips. Salt air creeps into enclosures that look sealed, attacks the copper, and creates intermittent faults that drive homeowners crazy. A gate motor diagnosis and small repair, including board cleaning or a limit switch, runs $180 to $320. We open the enclosure, clean the board, test the circuit, and tell you honestly what’s left in it before anyone sells you a new motor.
Motor Installation
Installing a gate motor in Lighthouse Point isn’t the same job as installing one inland. If your driveway gate sits twenty feet from a finger canal, the board needs a sealed enclosure and every fastener needs to be stainless. A standard painted-steel bracket from a box-store opener starts flaking within a season here. A replacement gate motor installation for a swing or slide gate runs $1,100 to $2,600, and we spec for the salt because a motor installed correctly on this peninsula lasts years longer than one bolted together with off-the-shelf hardware.
Linear & Slide Motors
Linear gate operators are common in Lighthouse Point, especially on newer estate-style homes with heavy slide gates. They’re built for duty, but only if the rack and pinion are protected from corrosion and the motor is mounted where standing water can’t reach it. A linear slide motor with a sealed enclosure and battery backup runs $2,400 to $4,800. Storm surge from the Intracoastal has flooded plenty of gate enclosures in this city, particularly on the lower-lying streets off Lighthouse Drive, so we recommend sealed operator boxes and battery backup for any slide gate motor here. A battery backup addition for an existing operator runs $450 to $900.
Why does my gate opener stop midway during the day but work at night in Lighthouse Point?
That’s usually thermal expansion. The South Florida sun heats the gate leaf, and on a heavy ornamental swing gate near the canal, that expansion binds the hinges or trips the operator’s torque limiter mid-travel. At night the gate cools and contracts, so it runs normally. We set the operator’s force limits and the gate’s clearances with that expansion in mind.
Can you install an underground gate operator on my canal-front property in Lighthouse Point?
Yes, and we do it regularly on estate properties along the finger canals. Underground operators need a properly sealed vault, gravity drainage, and marine-grade wiring because storm surge and heavy summer rains will find any gap. We’ve replaced flooded FAAC and BFT underground units at canal-side homes and rebuilt vaults that previous installers left unsealed. The full job is quoted upfront before any work starts.
Gate Access Control in Lighthouse Point
Gate access control in Lighthouse Point means keypads, card readers, phone entry, and video intercoms that have to survive salt spray, canal humidity, and hurricane season without quitting. That’s a taller order here than almost anywhere else in Broward County. If your keypad went dead after a storm or your intercom only works when it feels like it, call (877) 610-2993. The full scope of this work is on our Gate Access Control page.
Keypad Entry
A keypad entry system in Lighthouse Point needs weather-sealed contacts and a board that can handle sustained salt-laden humidity. The problem most homeowners run into is that a standard keypad is rated for general outdoor use, not for a canal-front microclimate. We replace failed boards with marine-grade parts, re-terminate wiring with tinned leads, and seal the enclosure properly so storm-driven rain doesn’t sneak past the gasket. A keypad replacement in Lighthouse Point typically runs $280 to $650 installed, depending on whether it’s a standalone keypad or one tied into a phone entry system.
Video Intercom
Video intercom systems in Lighthouse Point deal with two enemies: salt corrosion on the board and condensation fog on the lens. We see fogged or distorted pictures constantly, sometimes from a failed gasket allowing humid air into the lens housing, sometimes from a power supply cooking itself in the South Florida heat. A video intercom repair here usually runs $180 to $420 for common board, power supply, or gasket work. A full replacement with a new outdoor station runs $900 to $2,400.
Phone Entry & Card Readers
Phone entry systems let a gate call your cell phone when someone presses the call button. In Lighthouse Point, the outdoor call station takes the brunt of salt spray, and low-mounted control boards often get flooded during heavy rain or storm surge. Phone entry board repair typically runs $220 to $500, while a complete phone entry station replacement lands between $700 and $1,800. Card readers are common on homes with multiple vehicles or staff coming and going. The weakness in a salt environment is the terminal strip where bare wire meets the board. Card reader replacement with programming runs $300 to $700.
Why does my Lighthouse Point keypad corrode so much faster than my friend’s in Pompano Beach?
Because Lighthouse Point is a canal peninsula, your keypad sits within yards of salt water on at least one side, sometimes three. Pompano Beach properties are generally set further back from the salt spray zone. That sustained salt-laden humidity degrades contacts, terminal strips, and board traces in months instead of years. The fix is marine-grade replacement parts and tinned wiring.
After a storm, my gate access control panel is dead but the gate still moves. What should I check first?
Check the circuit breaker, then check for a GFCI outlet that may have tripped on the gate circuit. If power is present and the panel is still dead, the most likely cause in Lighthouse Point is storm water or salt-laden humidity reaching the control board through a failed gasket or a flooded low-mounted enclosure. Do not open a wet enclosure and start probing; call us and we’ll handle it safely.
Gate Parts & Welding in Lighthouse Point
If your gate hinge is sheared off or a weld has cracked on a canal-front home in Lighthouse Point, the fix usually costs between $180 and $650 depending on whether we’re replacing a single hinge or rebuilding a rusted post base. Most parts jobs here are done the same day because our on-site welding lets us fix the gate in your driveway instead of hauling it off and waiting a week. The full range of work is covered on our Gate Parts & Welding page.
Hinge Replacement
On canal-side properties in Lighthouse Point, salt spray works into hinge pins within a few years, especially on older ornamental iron gates. We stock marine-grade stainless hinges rated for exactly this environment, because a galvanized hinge from a big-box store will seize up before the next hurricane season. Hinge replacement here runs $180 to $340 per gate, and we shim and align the gate so it doesn’t sag against the latch post two months from now.
Post Replacement
This is where Lighthouse Point homes differ from almost anywhere else in Broward. The mid-century canal homes often have gate pilasters with rebar that started rusting decades ago, spalling the concrete from the inside. When a gate post wobbles, we don’t just swap the post. We check the pilaster core. Rebuilding a pilaster base with proper rebar and marine mix runs $450 to $900, and it’s the difference between fixing it once and fixing it every year. Fix the panel without the post and you’ll fix it twice.
Custom Welding
Sometimes the part doesn’t exist anymore. A 1962 ornamental gate with a snapped scroll, an estate gate that needs a custom bracket for a Viking operator arm, or a latch mount that never quite lined up. Hal welds it in your driveway, grinds it clean, and primes it against the salt before the paint cures. Custom welding jobs in Lighthouse Point typically run $150 to $500 depending on material and prep, and you get a straight quote before the torch comes out. Rail repair on a sliding gate runs $200 to $450, and we’ll check the rollers at the same time, because a seized roller is often what snapped the rail in the first place.
Can you weld a gate right in my driveway in Lighthouse Point?
Yes. Hal carries a full mobile welding rig, and that’s how most repairs in Lighthouse Point get done. The gate stays on your property, you see the work, and there’s no week-long wait while it sits in someone’s shop. Call (877) 610-2993 and we’ll tell you when we can be there.
Why does gate hardware fail faster in Lighthouse Point than in other Broward cities?
Lighthouse Point is a peninsula city threaded by saltwater finger canals off the Intracoastal, so virtually every driveway gate sits within yards of salt water year-round. Even a mile west, the air has less salt and hinges and welds last longer. Here, marine-grade stainless and regular maintenance are the baseline, not an upgrade.
Brands We Service in Lighthouse Point
We service FAAC, BFT, Linear, and Viking operators, along with LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. We carry common boards and limit switches for these brands on the truck, which keeps most Lighthouse Point repairs to a single visit. See our brands for the full list.
Pricing for Gate Repair in Lighthouse Point, FL
| Service | Typical range in Lighthouse Point |
|---|---|
| Hinge pin or hinge replacement | $165 - $390 |
| Gate realignment with operator limit reset | $180 - $450 |
| Weld repair, including grinding and repainting | $220 - $600 |
| Electric or automatic gate repair with diagnostics | $280 - $850 |
| Full hinge post rebuild on canal-front pilaster | $1,100 - $1,800 |
| Pedestrian gate installation | $900 - $2,400 |
| Single swing driveway gate (automated) | $3,800 - $6,500 |
| Double swing driveway gate (automated) | $6,500 - $12,000 |
| Sliding driveway gate (automated) | $5,500 - $13,000 |
| Gate motor diagnosis and small repair | $180 - $320 |
| Replacement gate motor installation | $1,100 - $2,600 |
| Keypad entry replacement | $280 - $650 |
What pushes the price up in Lighthouse Point more than anything is the pilaster condition and the salt-corrosion factor. A clean post on a newer build means a straightforward job. A spalled mid-century pilaster with rusted rebar means we rebuild the post before we hang the gate. The price we quote is the price you pay, agreed before any work starts.
Neighborhoods We Serve in Lighthouse Point
We cover the entire city, zip code 33064, and most Lighthouse Point calls get a same-day or next-day visit depending on urgency and weather. The canal-front streets are where we spend most of our time because the salt exposure makes gate hardware fail faster there than anywhere else.
- Streets around the Lighthouse Point Yacht Club
- Residential blocks off North Federal Highway
- Canal-side homes radiating from the Intracoastal
- The area near Frank McDonough Park
- Estate lots east of Lighthouse Drive
Service Area - Cities Near Lighthouse Point
We also handle gate work in the surrounding communities. If you’re in Pompano Beach, FL, Deerfield Beach, FL, Pompano Beach Highlands, FL, Coconut Creek, FL, or Boca Del Mar, FL, the same crew covers your area. We’re also on the ground in Lighthouse Point, FL every week.
Serving Lighthouse Point, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve Lighthouse Point and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the Lighthouse Point coverage area; if your address is on it, we can help.
Also serving nearby: Lighthouse Point, FL, Pompano Beach Highlands, FL, Deerfield Beach, FL, Pompano Beach, FL, Coconut Creek, FL, Boca Del Mar, FL.
FAQs About Gate Repair in Lighthouse Point
In most cases, yes. We keep same-day availability for Lighthouse Point calls, especially when a gate is stuck open or won’t close, because that’s a security issue on a canal-front property. Call (877) 610-2993 and a live person tells you exactly when we’ll be there.
It depends on the scope. A straight repair that doesn’t change the footprint is usually handled without new permitting, but if the pilaster rebuild changes footing dimensions or structural loading, the city may want an engineering review, especially on canal-front lots with setback rules. We’ll tell you plainly before we start.
Do you cover all of Lighthouse Point, including the canal-front homes?
Yes, we work every street in the 33064 zip, from the canal-front estates north of Lighthouse Drive to the homes bordering the Intracoastal on the east side. Canal-side properties are our bread and butter here because the salt exposure makes gate hardware fail faster than inland. Call (877) 610-2993 for a free estimate, and a live person will answer.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lighthouse Point Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth