Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kenmore
Gate installation in Kenmore, NY runs from about $1,100 for a basic pedestrian gate to $6,500-$11,000 for an automatic driveway gate with an operator, and most jobs are quoted free in writing before any work starts. Hal Gatewood and his crew have been setting posts, welding frames, and hanging gates since 2001, and they know what Kenmore’s tight lots and lake-effect winters do to hardware. Call (877) 610-2993 and a live person answers, not a voicemail. We’ll come out, measure, and give you a straight price.
Why Gatewood Fence & Gate Is Kenmore’s Preferred Gate Installation Company
Kenmore is not Amherst and it’s not Clarence. The lots here were surveyed when a Model A in the driveway was the widest thing a family owned. Side yards under four feet. Garages set back behind the house. Gates hung between a foundation and a fence line with maybe eighteen inches of working room. We’ve done enough installs on Delaware Road, Englewood Avenue, and the streets off Crosby to know that a standard swing panel ordered out of a catalog will hit the house. So we don’t order it.
Hal’s name is on the shop and the shop is down the road. The crew that shows up in Kenmore is the same crew you’ll see at the hardware store. No subcontractors, no third-party installers. Every job carries the 90-Day Done Right Promise in writing. If the gate binds, sags, or doesn’t latch right, one call brings Hal back, no runaround. And when you call at 2 a.m. because a gate motor is grinding, a live person picks up. That’s been true since 2001 and it’s not changing.
Our Gate Installation Services in Kenmore
Driveway Gate Installation
A driveway gate on a Kenmore lot has to solve two problems at once: it has to open without swinging over the sidewalk, and it has to survive a winter where the ground freezes four feet down. Most of the driveway gates we install in the 14217 zip code are sliding gates for exactly that reason. The motor mounts on a concrete pad with a rack and pinion track, and the gate opens parallel to the house instead of arcing into the street. Expect $4,200-$8,800 for a single sliding driveway gate with an operator, depending on width and whether we’re pulling a new power run.
Pedestrian Gate Installation
Pedestrian gates in Kenmore usually go where the old one stood for 70 years, which means the hinge post is original and the gate panel is newer than the post. We set new posts with deeper footings and a gravel weep at the base so water doesn’t sit against the post and heave it come February. A basic ornamental steel pedestrian gate with new posts runs $1,100-$2,400 in Kenmore. If we can reuse a sound original post, the price comes down.
Sliding Gate Installation
Sliding gates are the workhorse for Kenmore’s narrow driveways and shared rights of way. When a swing gate would block a sidewalk or clip a neighbor’s fence, a sliding gate moves along the property line instead. We install both rack and pinion and chain-driven systems. Ghost Controls and Viking operators are the two we recommend most often here because they handle wet, cold weather without fussing. A complete sliding gate installation with a keypad entry and safety photocells starts around $4,600 and goes up with gate length and automation level.
Swing Gate Installation
Swing gates still make sense in Kenmore, just not everywhere. The wider lots on the north side of Kenmore Avenue and the properties off Colvin Boulevard can take a double swing gate without eating a sidewalk or a neighbor’s hedge. We offset hinge posts, reinforce the post footings with more concrete than code asks for, and check the swing arc at least twice before we weld anything. A single swing driveway gate with a Linear operator runs $3,800-$7,200. A double swing gate runs more because you’re buying two panels and two actuators.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kenmore
We stock and service parts for DoorKing, Viking, and Linear operators, which covers most of the automatic gates we run into around Kenmore. When a motor goes down in January, we don’t want to tell you we’re waiting on a part from California. We keep the common boards, arms, and limit switches on the truck. If we’re installing a new operator, we’ll show you the brand, explain the warranty, and leave you the manual. That’s the whole arrangement.
Common Gate Installation Problems We See in Kenmore Homes
- Post footing heave from freeze-thaw. Kenmore sits in the Lake Erie lake-effect snow belt, and the same cycle that cracks sidewalks heaves gate posts out of plumb within two winters. A new gate installed on a shallow footing will bind on the latch by the third spring. We dig deeper and add crushed stone below the concrete.
- Side yards too narrow for a swing gate. A lot of Kenmore homes were built on 40-foot frontage, leaving a side yard under four feet. A stock swing gate will strike the house foundation before it reaches 90 degrees. We measure the actual post-to-foundation clearance and design around it, usually with a sliding gate or an offset hinge post.
- Old rust-jacked hinge posts. We see 1940s ornamental iron gates still hanging on their original posts all over west Kenmore. The post has rusted inside the concrete and the gate has sagged an inch or more. Hanging a new panel on that post transfers the sag to the new work within a season. We set new posts when the old one is gone.
- Automatic gates without safety edges on tight driveways. On lots where kids pass through a gate gap six times a day, an automatic gate needs entrapment protection. We install UL 325-compliant photocells and safety edges on every automatic gate, no exceptions. Code in Erie County requires it, and a gate without it is a hazard, not a convenience.
Pricing for Gate Installation in Kenmore, NY
Here’s what we actually see in this market. A pedestrian gate with one new post and a welded steel frame runs $1,100-$2,400. A single sliding driveway gate with a Viking or Ghost Controls operator runs $4,600-$8,800 depending on length, automation, and whether we’re trenching a power line. A double swing driveway gate with two operators and keypad entry runs $5,500-$9,500. Every quote is written, signed, and agreed before any work starts. The price we hand you is the price you pay. Kenmore homeowners over 65 or with a VA card get 10% off, permanently. There’s no trip charge inside Erie County, and we’ll give you a free second opinion on any written estimate from another company. Call (877) 610-2993 and we’ll set up a measure.
One Kenmore Job We Won’t Forget
On Tremaine Avenue, a 1928 bungalow had a side yard so tight a swing gate would have clipped the foundation by six inches. Our crew installed a Viking R6 sliding gate with a new concrete post footing for the rack and pinion track. We added a safety photocell at the property line and tied a keypad entry into the operator so the homeowner could get a mower into the backyard without leaving the driveway. It took a day and a half. The old post came out, the new one went in deeper than the old one ever was, and the gate has tracked straight through two winters. That’s the kind of job Kenmore throws at you, and we’ve seen enough of them to know what’s coming before we start digging.
The truth about Kenmore is this: the housing stock went up fast in the 1920s and 1940s, and the side yards were an afterthought. Side yards under four feet wide mean any new gate has to fit within post-to-foundation clearances where a stock swing gate simply will not work. We see shared driveways and easements on the older blocks, we see gates that have to open parallel to a fence line because there’s no width for an arc, and we see access that has to stay usable during the install because the backyard is the only way to get a wheelbarrow to the garage. A generic gate company shows up with a standard swing panel and figures it out when the panel hits the house. We measure first, because on a Kenmore lot, the measurement is the whole job. Our Gate Installation team has been doing this on tight lots since 2001, and we’ve learned that the gate that fits is the gate that lasts.
We Also Serve Cities Near Kenmore
While this page is about Kenmore, we take calls from Tonawanda, Amherst, Eggertsville, and Buffalo every week. The lots are different, the codes are mostly the same, and the winters are just as rough. If you’re a few blocks over the line, call anyway. We’ll tell you straight if it’s a job we can take.
Serving Kenmore, NY - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kenmore
Yes, with a caveat that we handle before we ever break ground. An easement means your neighbor has a legal right to pass, and a gate across it has to work for both of you. We talk through access, keypads, and emergency release before we quote, and we’ll put the operator handshake in writing. The gate itself still has to meet the same footing and safety rules. Call (877) 610-2993 and we’ll walk the site with you.
Yes, and in many cases it’s the only gate that will. A sliding gate runs parallel to the house or fence line and needs a track run, not a swing arc. We’ve installed them on side yards narrower than four feet by setting the track tight to the foundation and using a compact operator like the Viking R6 or a Ghost Controls kit. The tradeoff is you need a post or wall to park the gate against when it’s open. We’ll tell you if your lot supports it.
Sometimes, yes. We inspect the post inside the concrete. If it’s sound, we’ll build a new panel to match the post and hang it with new hinges. If the post is rust-jacked, which is common on 70-year-old Kenmore gates, reusing it means the new panel will sag within a season. We’ll show you the post after we pull the old gate off, and you’ll see what we mean. The second opinion is free.
Yes. Automatic gate operators installed in residential Kenmore must meet UL 325 entrapment protection standards, which means photocells or safety edges, or both, depending on the gate type and travel. Erie County inspects on a complaint basis, but an unguarded gate is a hazard to every kid on the block and we won’t install one without it. The cost is small. The risk is not.
A sliding gate, almost always. When the driveway is tight and the sidewalk is right at the property line, a swing gate has no room to arc without blocking pedestrians or hanging into a neighbor’s front yard. A sliding gate is the right answer. Expect $4,600-$8,800 installed with an operator and keypad entry. Call (877) 610-2993 for a precise quote on your specific driveway.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kenmore since 2001.