Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pelican Bay, FL
Gate repair in Pelican Bay runs $185 to $640 for most hinge, post, and operator work, and we can usually have someone at your property the same day you call. The community’s placement between the Gulf of Mexico and Clam Bay means salt air attacks gate hardware faster than anywhere inland, and the Pelican Bay Foundation’s architectural review adds a layer most out-of-town crews don’t know how to handle. Call (877) 610-2993 and you’ll talk to a live person who knows this community’s gates, not a voicemail.
Why Pelican Bay Homes Are Different
Pelican Bay sits between the Gulf of Mexico and the Clam Bay mangrove estuary, and that geography dictates how gates fail here. Salt-laden air attacks hinges, lock bodies, and operator housings faster than inland Naples, and on the western residential towers facing the water we regularly see significant corrosion within two to three years of installation. Summer afternoon thunderstorms and hurricane-season lightning strikes are the leading cause of fried control boards and surge-damaged access controllers, and we plan our parts inventory around those spikes every year.
The housing stock spans 1980s through 2000s construction. Mediterranean-style estates run ornamental aluminum and wrought-iron swing or slide gates, while high-rise condominiums use underground garage roll-ups and pedestrian gates that need completely different hardware profiles. A technician who only knows one style will misdiagnose the other, and that costs you money. Add the Pelican Bay Foundation’s architectural review on top of that, and you need a crew that treats the paperwork as part of the job, not an afterthought.
Gate Repair in Pelican Bay
Gate repair in Pelican Bay means working on gates nested inside gates: the individual estate gate, the villa-cluster entrance, and the condo tower garage gate all have to meet Pelican Bay Foundation standards before any hardware, operator, or finish gets touched. We prepare and submit the compliance paperwork as a standard part of the job, so your repair doesn’t stall waiting on approval. A live person answers at (877) 610-2993, and we quote the price in writing before any work starts. Our Gate Repair work covers everything from a seized hinge to a fried control board.
Electric Gate Repair
Electric gate repair in Pelican Bay typically runs $220 to $480 when we’re replacing a control board, servicing contacts, or wiring in a new receiver. Salt air is brutal on exposed electrical components here, and we open the operator housing to test voltage at the board before recommending anything. If your gate won’t respond to the remote or the keypad, the fix is usually a $185 radio receiver or a $240 logic board, not a whole new operator.
Automatic Gate Repair
Automatic gate repair covers the operator, the drive mechanism, and the safety loop. In Pelican Bay, we see a lot of original LiftMaster and DoorKing operators from the 1990s and early 2000s that are simply at the end of their service life, and a seized operator near Clam Bay is a classic salt-air casualty. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing. If your operator is beyond repair, we’ll quote an honest replacement price instead of nickel-and-diming a board that dies again in six months.
Hinge & Post Repair
Hinge and post repair in Pelican Bay starts around $285 for a reinforced hinge or welded repair and runs up to $640 when we’re cutting out a rotted post footing and setting new steel in concrete. The gate sags in the hinge post, not in the middle, and that’s where we start. On the western condo towers facing the Gulf, wrought-iron hinge posts can be ready to fail within two or three years. We weld on site, so your gate stays in your driveway.
Gate Realignment
Gate realignment in Pelican Bay usually runs $185 to $320 per gate. We adjust the hinge geometry, re-plumb posts, and reset the gate so it travels square instead of dragging or binding at the latch. Storm debris from hurricane season can push a gate frame out of true faster than people expect, and a realignment early saves you a cracked weld or a burned-out motor later.
Does Pelican Bay Foundation require approval for any gate repair, even replacing a hinge?
Yes, in most cases. The Pelican Bay Foundation’s architectural review applies to any change to a gate’s operator, hardware, or finish, including hinge replacement if the new hinge changes the appearance or material. We prepare and submit the specs for you, so your repair doesn’t stall waiting on paperwork. Call (877) 610-2993 and we’ll tell you what your specific gate needs.
Why do slide gates near Clam Bay fail faster than in inland Naples?
Salt-laden air from the Gulf and the Clam Bay mangrove estuary accelerates oxidation on exposed steel and aluminum. Rack and pinion gears, hinge pins, and operator housings on the western side of Pelican Bay show significant corrosion within two to three years. Inland Naples doesn’t get the same direct salt exposure, so we use sealed or marine-grade hardware near the water whenever Foundation approval allows. Call (877) 610-2993 for a free assessment.
Gate Installation in Pelican Bay
Gate installation in Pelican Bay runs anywhere from $2,800 for a basic single swing gate to $18,000 or more for a custom ornamental double gate with matched access control. Most jobs land between $4,500 and $9,500. The Pelican Bay Foundation’s layered architectural review is part of every install here, and we bring drawings, material samples, and compliant hardware specs to the first meeting, not the third. Our Gate Installation process starts with a free measure and a written price before any work begins.
Driveway Gate Installation
A driveway gate in Pelican Bay usually means a custom ornamental aluminum or wrought-iron swing gate on an estate home, or a heavier slide gate on a villa-cluster or tower entrance. We spec operators to the gate’s actual weight, not the manufacturer’s best-case number, because an undersized operator is the most common reason a Pelican Bay driveway gate groans or rips a hinge bracket loose within two years. Single driveway swing gates with operator and keypad run $5,500 to $8,000 installed.
Sliding Gate Installation
Sliding gates are the workhorse of Pelican Bay’s denser areas, especially villa clusters and condo tower garages. The rack-and-pinion track is a corrosion magnet in this salt air, so we install stainless or heavily zinc-coated track and set V-groove wheels on adjustable steel brackets. A slide gate on the western edge of Pelican Bay, facing the Gulf, needs different hardware than one set back inland, and slide gate installations with track and safety loops run $6,500 to $12,000.
Swing Gate Installation
Ornamental swing gates are what most Pelican Bay estate owners picture when they think “entrance.” We fabricate and weld on site so the gate matches the opening precisely, and heavy custom gates need hinge posts set deep and plumb because a gate sags in the hinge post, not in the middle. Custom ornamental double swing gates with both leaves automated run $9,000 to $18,000 depending on the ironwork and access control.
Does a new gate in Pelican Bay need Foundation approval before installation?
Yes. Every gate on a Pelican Bay property, whether it’s an individual estate, a villa-cluster entrance, or a condo tower garage gate, must pass Pelican Bay Foundation architectural review before any operator, hardware, or finish is replaced or upgraded. Installing without approval means removing it at your expense and starting over. We prepare the submittal package with material samples, drawings, and hardware specs that match the community’s Mediterranean profile. Call (877) 610-2993 and we’ll walk you through it.
Why do our underground gate operators keep failing every two years on our condo tower’s garage gates?
Salt-laden Gulf air and storm surge flooding are a brutal combination for below-grade operators. The pit fills with brackish water, the control board shorts, and the motor bearings rust. We install flood-rated pit liners, elevated control boards, and sealed moisture sensors where the Pelican Bay Foundation and building code allow, and underground slide gate operator replacement runs $4,000 to $7,500 per pit. Call (877) 610-2993 to have yours assessed.
Gate Motor & Opener in Pelican Bay
Gate motor repair and replacement in Pelican Bay runs $275 to $1,900 depending on whether we’re swapping a control board, replacing a seized operator, or installing a full slide motor with battery backup. Most Pelican Bay jobs are done same week, with the exception of operator replacements that require Pelican Bay Foundation architectural approval. We know the streets, the gate styles, and the foundation rules here. Our Gate Motor & Opener work covers every brand common to this community.
Gate Motor Repair
Most Pelican Bay motor repair calls start with “the gate was fine when we left in May, and now it won’t budge.” Six months of humidity, salt, and disuse does that, and we troubleshoot the whole system: control board, capacitor, limit switches, loop detector, wiring, and mechanicals. We also check surge history, because summer lightning strikes are the leading killer of access controllers here. A common repair runs $275 to $650 depending on what actually failed.
Gate Motor Installation
Full operator replacement in Pelican Bay typically lands between $900 and $1,900, including the motor, mounting hardware, programming, and safety checks. If your gate is visible from a Pelican Bay Foundation common area, the replacement likely needs architectural review before we install anything, and we prepare the submittal and coordinate with the foundation so you don’t get a violation notice. The gate sags in the hinge post, not in the middle, and we check the structure before we blame the motor.
Linear Gate Motors
Linear operators are common on Pelican Bay’s slide gates, especially at estate entrances and carriage courts. A new Linear slide motor with rack and hardware runs $1,200 to $2,100 installed. We also repair older Linear boards where parts are still available, and we’ll tell you honestly when it’s time to stop feeding a 20-year-old unit and put the money toward a replacement that has surge protection built in. Around the Gulf, that surge protection isn’t optional.
Does Pelican Bay Foundation require approval before I replace my gate motor?
Yes, in most cases. Pelican Bay Foundation architectural review standards apply to visible gate hardware, including operator housings, mounting posts, and certain finishes. If your gate is visible from a common area, a street, or a neighboring property, you’ll likely need approval before we install. We prepare the submittal, spec compliant materials, and wait for the foundation’s sign-off before we order parts. Call (877) 610-2993 to confirm what your specific gate needs.
Can you add a battery backup to my existing LiftMaster operator?
Yes. We install battery backup units on most LiftMaster operators, and we recommend it strongly in Pelican Bay because power cuts and storm outages are common here. A gate without battery backup strands you outside or traps you inside, and a backup unit with installation runs $350 to $700. It kicks in automatically when the power drops and keeps the gate functional through short outages. Call (877) 610-2993 to schedule the install.
Gate Access Control in Pelican Bay
Gate access control in Pelican Bay means keypads, card readers, phone entry, and video intercoms that work every time a resident pulls up, and it means wiring, hardware, and finishes that pass Pelican Bay Foundation review. The salt air and lightning season here kill unprotected electronics faster than inland communities, so surge suppression and proper grounding are part of every repair we do. Our Gate Access Control service handles the mechanical gate and the low-voltage electronics in the same visit.
Keypad Entry
A Pelican Bay keypad has to survive direct sun, salt spray, and the occasional hurricane gust while still looking like it belongs on the gate. We install and repair wired and wireless keypads from DoorKing, Viking, and Linear, and we wire them into existing operators without leaving exposed cable. When a keypad fails intermittently in a villa cluster, it’s usually a corroded terminal or a power supply cooking in the sun. A keypad replacement runs $275 to $600.
Phone Entry
Phone entry systems, the call boxes that ring a resident when a guest arrives, are the first thing to die when lightning season hits because the copper phone line or cellular modem acts like a lightning rod if it wasn’t grounded and surge-protected. We install and repair telephone entry systems over landline, cellular, and VoIP, and we always check the grounding on the existing install. Phone entry repair or replacement runs $450 to $1,200.
Remote Control
Remotes and receivers are simple until they’re not. A gate that opens with one remote but not another, or only works from three feet away, usually points to a receiver antenna issue or frequency interference from nearby marina or tower equipment. We carry replacement remotes and receivers for Viking, Ghost Controls, and DoorKing so a Pelican Bay resident doesn’t wait a week for a $40 part. Call (877) 610-2993 and we’ll bring the right one.
Does Pelican Bay Foundation approval apply to access control upgrades?
Yes, almost every operator, finish, or hardware change on a gate inside Pelican Bay requires Pelican Bay Foundation architectural review before work begins, and we handle that paperwork as part of the job. We match housing finishes to the Foundation’s approved palette and submit material specs before we install, so the job doesn’t stall halfway through. Call (877) 610-2993 and we’ll confirm what your specific gate needs before you schedule anything.
Why does my Pelican Bay phone entry gate stop working after summer thunderstorms?
The most common cause is a lightning surge that took out the control board or the phone entry module because the original install had no dedicated surge protection. We see this constantly in Pelican Bay after summer storms, and the fix is a new surge suppressor, proper grounding, and sometimes a replacement board if the strike was close. We test grounding on every repair because a phone entry system that isn’t grounded is a repeat failure waiting to happen. Call (877) 610-2993 for service.
Gate Parts & Welding in Pelican Bay
Gate parts and welding in Pelican Bay come down to one thing: the gate has to keep working while it’s being fixed. This is a gated community inside a gated community, and nobody wants their driveway sealed off for a day while a crew figures out a weld. We weld on site, so your gate stays in your driveway, and we know the Pelican Bay Foundation approval process well enough to tell you upfront whether your repair needs a submittal. Our Gate Parts & Welding work starts with the problem, not a catalog.
Hinge Replacement
Salt-laden air off the Gulf eats hinge pins faster than any other hardware on a gate, and we see hinge pins on western-facing tower gates in Pelican Bay that are pitted and frozen within two to three years of installation. We remove the old hinge, grind the weld clean, and weld in a new stainless or galvanized pin set sized for the gate leaf’s actual weight. Hinge replacement runs $280 to $650 per hinge pair.
Post Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. In Pelican Bay, post footings in villa-cluster rights of way and tight setbacks heave from stormwater and settlement, so we pull the old post, pour a new footing with galvanized anchor bolts set below grade, and re-set the post plumb. Post replacement runs $480 to $1,100 depending on post size, footing depth, and whether we’re welding new hardware on.
Custom Welding
Wrought-iron and ornamental aluminum gates in Pelican Bay often need welds on site that a parts catalog can’t solve: cracked scrollwork, broken hinge collars, rusted post caps, bent picket ends where storm debris hit. We TIG-weld aluminum and stick-weld steel, then coat the repair to match the existing finish. Custom welding starts at $190 for a small repair and runs up from there, and we quote the price before we strike an arc. The quote is the price.
Does a sagging gate in Pelican Bay need a new panel or a new hinge post?
Ninety percent of the time, the panel is straight and the post is the problem. A gate sags in the hinge post, not in the middle, and we check the post with a level and a string line before we ever talk about replacing the leaf. If the post is rotted or heaving, we replace it and re-hang the same panel, which usually runs $480 to $1,100. Call (877) 610-2993 and we’ll tell you which one you need.
Do I need Pelican Bay Foundation approval before you replace my gate hinges or weld new brackets?
Usually yes, if the hinge or bracket changes the gate’s appearance or finish. The Pelican Bay Foundation’s architectural standards apply to hardware and finish changes on gates within the community, and we’re familiar with the submission process. For like-for-like hinge swaps with an identical finish, approval is often not required, and we’ll tell you which category your repair falls into. Call (877) 610-2993 and we’ll check.
Brands We Service in Pelican Bay
We service Linear, Viking, Ghost Controls, and DoorKing operators and entry systems in Pelican Bay, and we keep common boards, receivers, and remotes stocked locally so a repair doesn’t wait a week for a part. We certify on nine major gate brands, and our brands page covers the full list. Most Pelican Bay repairs are done same-day or next-day.
Pricing for Gate Repair in Pelican Bay, FL
| Service | Typical range in Pelican Bay |
|---|---|
| Service call to diagnose a dead operator | $85 - $125 |
| Hinge repair or realignment | $185 - $320 |
| Electric gate repair (board, receiver) | $220 - $480 |
| Post replacement with new concrete footing | $300 - $640 |
| Motor repair (board swap, capacitor, limit switch) | $275 - $650 |
| Hinge replacement (per pair) | $280 - $650 |
| Motor replacement (standard estate gate) | $900 - $1,900 |
| Slide motor with track work | $1,200 - $2,100 |
| Full operator replacement for slide gate | $950 - $2,400 |
| Custom double swing gate, automated | $9,000 - $18,000 |
What pushes a Pelican Bay price up is gate weight, operator type, Foundation review requirements, and whether we’re cutting into an existing wall or setting new posts. Every price is quoted and agreed to in writing before we touch anything, and the number on the quote is the number on the invoice. No trip charge inside the county, and seniors and veterans get a permanent 10% discount.
Neighborhoods We Serve in Pelican Bay
We cover all of Pelican Bay’s 34108 zip code, from the Gulf-front high-rises to the inland estate lots. Typical response time within the community is same-day or next-day, and we schedule around your gate, not our route.
- Bay Colony
- Hammock Oak
- The Strand
- Gulfside
Service Area - Cities Near Pelican Bay
Gatewood Fence & Gate serves Pelican Bay and the surrounding Collier County communities. If you’re in Naples Park, FL, Naples, FL, Golden Gate, FL, East Naples, FL, or Bonita Springs, FL, we handle gate repair and installation there too. Call (877) 610-2993 and a live person will tell you when we can get to your property.
Serving Pelican Bay, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve Pelican Bay and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the Pelican Bay coverage area; if your address is on it, we can help.
Also serving nearby: Naples Park, FL, Pelican Bay, FL, Naples, FL, Golden Gate, FL, East Naples, FL, Bonita Springs, FL.
FAQs About Gate Repair in Pelican Bay
Most Pelican Bay gate repairs are completed same-day or next-day. We answer the phone with a live person around the clock at (877) 610-2993, and when you call about a gate that won’t open or won’t close, we schedule the visit while you’re on the line.
No. Like-for-like hardware swaps with an identical finish often don’t need review, but any change to a gate’s operator, hardware, or appearance typically does. We tell you which category your job falls into before we start, and we prepare the submittal paperwork when it’s required. Call (877) 610-2993 and we’ll check for you.
Yes. October and November are the busiest months because returning snowbirds find operators seized from humidity, boards fried by summer lightning, and frames warped by storm debris. If you’re coming back for the season, call (877) 610-2993 early so we can get your gate checked before the rush.
Need gate repair in Pelican Bay? Call (877) 610-2993 for a free estimate. A live person answers, the price is quoted in writing before work starts, and Hal Gatewood stands behind every job with the 90-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pelican Bay Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg