Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Huntington
Gate installation in Huntington, NY runs $2,800 to $9,500 for most driveway gates, with ornamental steel and wrought-iron swing gates on stone pillars at the higher end. We’re Gatewood Fence & Gate, and we’ve been building and fixing gates on Long Island’s North Shore since 2001. If you live near Huntington Harbor or anywhere in 11743, you already know the salt air punishes gate hardware faster than it should. Call us at (877) 610-2993 and you’ll get Hal or someone on his crew, not a phone tree. We measure, we quote a written price, and we do not start until you’ve seen it and agreed to it.
Why Gatewood Fence & Gate Is Huntington’s Preferred Gate Installation Company
Huntington homeowners tend to ask the same question after a bad experience with a big company: will the person who quoted the job actually be the one doing it? With us, yes. Hal Gatewood’s name is on the shop, his address is published, and he has been at this since 2001. We’re the shop that welds on site, in your driveway, instead of hauling your gate to some warehouse and hoping it comes back right. Every job carries our 90-Day Done Right Promise in writing. If something’s not right, one call brings us back. No runaround, no fine print.
The salt air off Huntington Harbor and the Sound does not care about warranties from a company three states away. It cares about stainless hardware, sealed boards, and proper coatings. So do we. Huntington is not a generic install market. The older estate properties around the harbor, the Victorians in the village core, the mid-century ranches on the wooded lots south of 25A – each one has different posts, different setbacks, different electrical runs. We know those streets. We know the difference between a gate on New York Avenue and one down a private lane off West Neck Road.
We stock parts in our local shop for the brands Huntington actually runs: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we are not waiting on a warehouse to ship a circuit board while your driveway sits open. And every call – day, night, weekend, holiday – is answered by a live person. Hal picks up. Hal’s crew picks up. You never get a recording.
Our Gate Installation Services in Huntington
Driveway Gate Installation
Most of what we install in Huntington is driveway gates, and most of those are swing gates on existing stone or brick pillars. That is the Gold Coast style. But before we hang a gate, we check the posts. In Huntington’s clay-heavy soil, freeze-thaw cycles heave pillars out of plumb every few winters. A new gate on a shifting post sags at the hinge within a season. If the footings need rebar and fresh concrete, we tell you upfront and price it in writing before we cut anything.
Swing Gate Installation
Swing gates make sense on Huntington’s estate-style lots because the driveway setbacks are wide and the pillars are already there. What fails here is not the gate panel itself, it’s the hinge. Salt-pitted steel hinges wear out fast, especially within a half-mile of the Harbor. We install stainless-steel bearings and sealed hinge hardware as standard on coastal jobs, because ordinary galvanized hinges last maybe five years here. If you are going to pay for a gate, pay for hardware that survives the Sound.
Sliding Gate Installation
Sliding gates show up on narrower lots, but near the coast they have a specific failure mode: chain drives corrode. Salt air gets into the links, the chain stretches unevenly, and the gate starts jerking and binding. For Huntington’s salt-exposed properties we recommend rack and pinion drives, which don’t have the same corrosion points. We will tell you when a chain drive is fine – and when it won’t make it past three winters.
Security Gate Installation
A security gate in Huntington usually means a heavier frame, a taller panel, and an automated opener with an access system. On the older North Shore estates, we wire in keypads and intercoms alongside the gate, often tied to the existing stone pillars and landscaping. We also make sure the entrapment safety features – photo eyes, safety edges – are present and tested. A heavy automated gate on a private lane needs them. No exceptions.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Huntington
We install and service gate openers from Linear, DoorKing, Viking, and Ghost Controls, but we work across nine major brands. Huntington’s salt air is hardest on circuit boards, and we have learned over the years which units survive here and which ones fail after the second humid August. We stock boards, remotes, and safety parts locally so we are not waiting on a truck from out of state. When a board corrodes, you need it swapped that week, not next month.
Common Gate Installation Problems We See in Huntington Homes
- Salt-pitted hinges fail before the gate does. Within a half-mile of Huntington Harbor, steel hinges rust and seize in 5 to 7 years – half the lifespan you would expect inland. Homeowners call us thinking they need a new gate; often they need new hinges and a post reset.
- Opener circuit boards corrode from salt-air infiltration. The boards are not sealed well from the factory for coastal use. We see intermittent operation – gate opens halfway, then sits there – and it almost always traces back to a corroded board or relay.
- Clay-heavy soil heaves stone pillars seasonally. North Shore clay swells in wet winters and shrinks in dry summers. Over two or three seasons, a stone pillar moves far enough that a heavy swing gate drags or fails to latch.
- Older estate gates were never designed for electric openers. The ornamental wrought-iron gates on Huntington’s older properties predate modern automation. Adding an opener requires mounting reinforcement, wiring, and safety upgrades, not just bolting a motor to the gate.
Pricing for Gate Installation in Huntington, NY
You should know what numbers look like before you call anyone. A single swing gate for a driveway in Huntington typically runs $2,800 to $5,500 installed, depending on the frame weight and whether we use existing pillars or pour new footings. A double swing gate, which is common on estate entrances, sits between $5,000 and $9,500. Sliding gates run slightly higher because of the track and the drive mechanism; most fall in the $4,000 to $7,500 range. Add an automated opener with controls and you are looking at $1,200 to $3,200 more, depending on the brand and whether we need to run new electrical or install solar. Every Huntington quote is written, itemized, and agreed before we start. Free estimates, no trip charge inside the county, and a free second opinion on any written estimate you already have. And for the older homeowners who ask: we keep a standing 10% discount for seniors and veterans, and $40 off any repair over $200. Call (877) 610-2993 for an exact quote on your gate installation in Huntington.
On a large-lot estate near Huntington Harbor, we installed a new double swing gate on existing stone pillars a few years back. The old hinges were so salt-pitted the gate had sagged three inches at the latch side. We replaced them with stainless-steel bearings, mounted a LiftMaster swing gate operator with a sealed control board, and poured new post footings with rebar because freeze-thaw had shifted the original clay-heavy footings. The gate has not moved since. That is the difference between coastal-grade work and inland-standard parts.
We Also Serve Cities Near Huntington
Our Gate Installation crews work across the North Shore. If you are in Cold Spring Harbor, Greenlawn, Centerport, or South Huntington, you are inside our normal service area, with no trip charge anywhere in the county. The salt-air issues in Gate Installation in Huntington apply just as much to the neighboring harbor towns, and we spec the hardware accordingly.
Serving Huntington, NY - Our Local Coverage Area
We’re based in the Huntington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Huntington
Salt-laden air from Huntington Harbor and the Sound oxidizes steel hinges and latch hardware at roughly twice the rate of inland Long Island towns. That means hinges that would last 10 to 15 years in Commack often fail in 5 to 7 years within a half-mile of the water. The fix is stainless-steel bearings and sealed hardware, not a heavier coat of paint. Call us at (877) 610-2993 and we will tell you exactly what is on your gate and what it should be.
The short answer is sealed control boards and dry enclosures with desiccant packs, installed away from the direct sea breeze. Most factory boards are not sealed for coastal use, so they corrode internally after a few seasons. We mount sealed units and check the enclosure gaskets every time we service a gate near the water. For an exact recommendation on your opener, call (877) 610-2993 – estimates are free.
Huntington’s clay soil expands and contracts with freeze-thaw cycles, which slowly shifts stone gate posts. You need footings dug below the frost line with rebar reinforcement, not just a concrete collar around the post. We pour footings at depth and let them cure before hanging the gate, which prevents the seasonal sag that plagues shallow footings. Call (877) 610-2993 for a site look and a written price.
Chain drives corrode link by link in salt air; the chain stretches unevenly and the gate starts jerking, binding, or jumping the sprocket. Rack and pinion drives eliminate the chain entirely, which removes the primary corrosion failure point. If your sliding gate is near the water, rack and pinion is the only drive we recommend. Call (877) 610-2993 and we can tell you what is currently on your gate and what replacement costs.
Yes. Older estate gates were built before modern entrapment standards, so when we swap an operator we add photo eyes, safety edges, and an audible alarm if the gate is used by vehicles and pedestrians. This is not optional cosmetic work; it is required to prevent a heavy gate from closing on a child, a pet, or a car. We include those safeguards in the written quote, so you will see exactly what you are paying for before we begin. Call (877) 610-2993 today.
Written by Hal Gatewood, Owner of Gatewood Fence & Gate, serving Huntington since 2001.
Ready to talk about your gate? Call Hal at (877) 610-2993 for a free estimate on gate installation in Huntington, NY. We answer live, we show up when we say we will, and we stand behind every job with the 90-Day Done Right Promise in writing.