Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Franklin
Gate installation in Franklin runs from about $1,900 for a basic 6-foot chain-link pedestrian gate up to $8,500 for a double-wide automatic driveway gate with an operator, safety edges, and keypad entry. Most Franklin jobs we finish in a single day once the posts are set, though larger driveway gates or security gates with automation typically take two days including concrete cure time. Franklin sits in the Great Miami River valley, which means the ground under your gate does not behave like the ground in most of Warren County, and that changes both how we install and how long the installation lasts. Call (877) 610-2993 and you will get a live person who knows Franklin, not a recording.
Why Gatewood Fence & Gate Is Franklin’s Preferred Gate Installation Company
We have been setting gates in Franklin long enough to know that the soil near the river holds water like a sponge. You cannot drive a post and forget it on streets near the Great Miami corridor and expect the gate to stay plumb past the second spring. That is why our Gate Installation crew uses hydraulic post setting and concrete re-pour as standard practice on floodplain ground, not as an add-on when something fails.
Hal Gatewood has been at this since 2001, and his name is on the shop and on every invoice. We are not a rotating crew of subcontractors. The person who answers the phone is the same person who can tell you what your gate is actually worth fixing. Franklin customers have called us about a sagging swing gate and we have been able to say, before even seeing it, that the hinge post is the problem, because we know the failure pattern on this soil. That kind of local knowledge is not something you get from a number in another state. Our 90-Day Done Right Promise is plain: if it is not right, one call brings us back, and no one asks you to prove anything. There is no trip charge inside the county, and we offer a free second opinion on any written estimate you already have.
Our Gate Installation Services in Franklin
Driveway Gate
A driveway gate in Franklin has to contend with two things at once: the freeze-thaw cycle that heaves any post, and the river bottom moisture that makes the heaving worse. We set posts below the frost-saturated layer and pour concrete collars wide enough to hold in shifting ground. Whether you want a single swing gate near State Route 73 or a sliding gate on a narrower lot, we show you the price before we touch anything.
Pedestrian Gate
Most pedestrian gates around Franklin’s older mill-district neighborhoods are 40 to 70 years old, and many are still the original chain-link or wooden-framed gates hung when the house went up. We can often re-hang them on fresh posts and keep the character, rather than tearing out something that has been standing for two generations. If the framing is rotted past repair, we will tell you plainly and put the replacement cost in writing first.
Sliding Gate
Sliding gates make sense on Franklin lots where a swing gate would smack into a parked car or spill out onto a busy street. The track has to stay clear of debris, and on river-corridor properties we see gravel and silt wash down during heavy rains, so we set the track slightly elevated and leave drainage gaps. A linear operator from Linear or DoorKing pairs well with a Franklin sliding gate, especially when the gate is heavy steel.
Swing Gate
Franklin’s most common installation, plain and simple. A double swing gate on an automatic opener needs both posts perfectly plumb and both leaves balanced, or the operator burns out early. We weld and adjust on site, so if the gate needs a hinge plate moved or a post re-set, we do not haul it back to a shop. The work happens in your driveway while you watch, which is how we prefer to work anyway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Franklin
We are certified to service nine major gate brands, and for Franklin customers we carry parts locally for Viking, Ghost Controls, and Linear, which covers most of the automatic operators we find on older properties in this area. That means a failed control board on a Viking swing gate does not sit dead for two weeks waiting on a part from somewhere else. If you bring us a brand we do not stock, we can usually have it by the next business day. And when an older operator has an obsolete board without modern entrapment protection, we will tell you straight: sometimes a full operator swap is cheaper than chasing a retrofit.
Common Gate Installation Problems We See in Franklin Homes
- Posts heaved out of plumb. Franklin’s saturated floodplain soil expands and contracts with every freeze-thaw cycle, and posts near the river corridor can move two to four inches off vertical in a single wet winter. That kills latch alignment and burns out automatic opener arms.
- Wooden posts rotted below grade. A post can look solid above ground and be soft as sponge just below the grass. We cut them at the base, dig to clean material, and set a new post in concrete with a wider footing than the original ever had.
- Sagging metal swing gates. The sag is in the hinge post, not in the middle of the leaf. Re-hanging the gate only masks the problem. We pull the post, re-set it, and check that the hinges are rated for the weight of the finished gate.
- Obsolete operator control boards. Many automatic gates on Franklin properties built before the 1990s have control boards that predate UL 325 safety standards. Retrofitting an old board can cost more than replacing the whole operator, and old boards lack the photo eyes and reverse-on-contact protection that keep kids and pets safe.
Pricing for Gate Installation in Franklin, OH
Here is what you can expect to pay in Franklin, and these are real ranges, not phone-game estimates. A standard pedestrian chain-link gate runs $300 to $700 installed. A basic 10-foot driveway swing gate in steel runs $1,500 to $2,800. A double driveway gate with an automatic operator, safety edges, and two keypads runs $4,500 to $8,500. A sliding security gate, which is common on Franklin commercial lots and a few rural residential drives, starts around $6,000 and runs up with hardware and access control. The price is quoted and agreed before any work starts. You will not get a surprise invoice at the door. Call (877) 610-2993 for an exact written quote, and remember: $40 off any repair over $200, no trip charge inside the county, and 10% off for seniors and veterans, permanently.
We Also Serve Cities Near Franklin
Our crews serve Franklin and the surrounding communities in southwestern Ohio. That includes Franklin, plus Carlisle, Springboro, Middletown, and Germantown. If you are a few minutes outside city limits on county property, you are still inside our no-trip-charge area, and we are still the same local company you can look in the eye at the hardware store.
Serving Franklin, OH - Our Local Coverage Area
We’re based in the Franklin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Franklin
Franklin’s Great Miami River floodplain holds water in the soil year-round, and when that wet soil freezes and thaws through a southwest Ohio winter, the ground under your gate posts shifts. Posts can heave two to four inches out of plumb by spring. Higher-ground towns like Mason and Lebanon drain faster, so their gates stay put longer. Call (877) 610-2993 and we will set your posts to hold in Franklin’s specific soil, not someone else’s.
We can usually save the frame, the pickets, and the hardware if the gate is still structurally sound. The question is what sits below grade. If the posts are rotted from floodplain moisture, we replace them and re-hang the original gate on fresh footings. If the frame itself is soft, replacement is the cheaper answer in the long run, and we will show you the number either way before we start.
The hinge post, almost every time. Franklin’s wet river-valley soils let that post heave and lean until the gate sags and the latch will not line up. Fixing the panel without fixing the post means you will do the job twice, because the sag comes right back. We reset the post first, then hang the gate true.
Most do not. Gates installed before the late 1990s or early 2000s often lack UL 325 entrapment protection, which means no photo eyes and no auto-reverse when the gate hits something solid. If you have kids, grandchildren, or pets, that is a real hazard. In many cases, replacing the old operator costs less than trying to patch in modern safety features, and we will tell you that plainly rather than sell you an overpriced board swap.
It affects the post design more than the gate style. Swing and sliding gates both work in Franklin, but near the river we use deeper concrete collars and hydraulic setting so the posts survive the freeze-thaw cycle. We also recommend steel posts over wood below grade, because Franklin’s soil moisture rots wood posts faster than you would believe. For a free estimate on any gate style, call (877) 610-2993.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Franklin since 2001.