Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Melrose Park, FL
Most gate repair calls in Melrose Park come down to two things: salt air off the Intracoastal eating through hardware, and original posts that were set into coral rock or sand with no real footing. A hinge replacement here typically runs $145 to $285, and a post that needs re-plumbing lands between $350 and $750. Hal Gatewood and his crew fix the gate in your driveway, not hauled across town. Call (877) 610-2993 and a live person answers, day or night.
Why Melrose Park Homes Are Different
Melrose Park sits just west of the Intracoastal Waterway, so salt-laden air moves through the neighborhood all year. Steel hinges, latch hardware, and swing-arm operators corrode here far faster than in inland Broward County. We see hinges seized solid on gates that are only five or six years old. Add 60-plus inches of annual rainfall and hurricane-season wind loads, and gate hardware in Melrose Park fails on a much shorter cycle than the manufacturer’s rating suggests.
The housing stock is another factor. These are mostly post-WWII concrete-block ranch homes built in the 1950s and 1960s, and many still have their original ornamental iron or chain-link gates. Those gates were often set directly into coral rock fill or sandy soil with no proper footing poured underneath. Over decades of wet-dry cycles, the posts tilt. What looks like a hinge failure or a motor problem is often a post that has shifted an inch or two. If you fix the panel without the post, you’ll fix it twice.
One more thing specific to this neighborhood: Melrose Park is unincorporated Broward County. Gate permits and inspections go through the Broward County Building Division, not a municipal office. That affects timelines and code compliance compared to incorporated cities like Fort Lauderdale or Oakland Park. We handle the paperwork so you don’t have to.
Gate Repair in Melrose Park
Gate repair in Melrose Park usually means diagnosing a gate that’s been fighting itself for months. A motor burning out is rarely the root cause. It’s a symptom of a gate that’s been scraping or binding so long the opener finally gave up. We find the bind before we change the motor. If your gate is sagging, grinding, or refusing to close, we’ll come look at it, tell you straight what’s wrong, and give you a written price before any work starts. Most Melrose Park repair jobs are done same-day when you call before early afternoon. Here’s what we handle most often.
For a full breakdown of what’s involved, see our Gate Repair page.
Electric Gate Repair
In Melrose Park, electric gate repair usually means diagnosing a motor that’s been fighting a misaligned track or a rusted roller for months. Salt air off the Intracoastal accelerates corrosion on control boards and wiring connections far faster than manufacturer specs suggest. We bench-test motors to see what’s salvageable, and we service LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and more. If the motor truly is dead, we’ll tell you straight and quote a replacement before we order it.
An electric gate motor replacement, including the opener unit and labor, generally runs $600 to $1,400 depending on the brand and the existing wiring condition.
Automatic Gate Repair
Automatic gates on Melrose Park ranch homes get used hard, especially where the gate is the only way in. When an opener fails, the problem is often upstream: photo eye sensors baking in direct South Florida sun, safety loops cracked in the concrete driveway, or a swing-arm that’s been forced against a post that shifted during hurricane season. We trace the whole system, not just the part making noise. That’s the difference between a repair that holds and one that fails again in six weeks.
A straightforward hinge repair or latch replacement in Melrose Park runs $145 to $285, depending on access and whether we need to weld on site.
Hinge & Post Repair
Here’s what we find constantly in Melrose Park: original 1960s ornamental iron driveway gates set directly into coral rock fill or sandy soil, with no proper footing poured underneath. The post tilts, the gate sags, and the hinge takes the punishment. You can replace the hinge alone, but you’ll fix it twice. We re-plumb the post, pour a proper footing where needed, and weld the hinge back to spec.
Post resetting and re-concreting, which is common in this neighborhood, typically lands between $350 and $750 per post. The price includes excavating the old footing, setting the post plumb, and welding any reinforcement the job needs.
Gate Realignment
A gate that scrapes the driveway or won’t latch is wearing down every component connected to it. Realignment in Melrose Park often means addressing years of wet-dry cycles that have heaved the original shallow concrete footings. We measure corner-to-corner, reset posts where necessary, and square the frame so the gate swings true. On-site welding means the gate stays in your driveway while we work.
How fast can you get to Melrose Park for a gate repair?
We can typically reach most Melrose Park addresses the same day for urgent repairs, and we prioritize gates that won’t close or are stuck open. Call (877) 610-2993 and a live person will confirm a time window before you hang up. For non-urgent work, we schedule an exact window and hold to it.
What kind of warranty do you offer in Melrose Park?
Every repair carries the 90-Day Done Right Promise in writing. If something we fixed doesn’t hold, one call brings Hal or one of his crew back. No runaround, no deductible, no fine print. That promise is stamped on every invoice, not buried in terms.
Gate Installation in Melrose Park
Gate installation in Melrose Park has to account for two things at once: daily operation in salt-laden air and the occasional hurricane-season blow that shoves a solid gate sideways. A new driveway gate here typically runs $1,800 to $6,500 installed, depending on material, size, and operator. Most Melrose Park jobs take one to two days once materials arrive, and we quote the full price in writing before any work begins. See our Gate Installation page for the full scope.
Driveway Gate Installation
A new driveway gate in Melrose Park has to handle the daily grind of opening and closing in sandy, salt-heavy air, and the occasional storm that turns a solid gate into a sail. We measure for wind load, not just for clearance. Most driveway gates we install here are aluminum or steel swing gates with a LiftMaster or FAAC operator, anchored in fresh concrete footings deep enough to hold in the local soil, not just the minimum that looks good on paper.
A fabricated steel double swing gate with a LiftMaster operator and safety photocells usually lands between $3,500 and $5,500.
Pedestrian Gate Installation
Pedestrian gates in Melrose Park are often the forgotten sibling of the driveway gate. They take a beating, they’re used more often, and they’re usually the first thing to sag. We install and re-plumb walk gates with proper concrete footings and corrosion-resistant hardware. If you’re running a walk gate along the side yard for a pool or the backyard, we can match it to your existing fence and set it up with a keypad or keyed lock that actually works.
A basic aluminum pedestrian gate in Melrose Park starts around $850 installed.
Sliding Gate Installation
Sliding gates make sense on Melrose Park lots where a swing gate would eat half the driveway. We install cantilever and track-style sliding gates, but we’ll tell you straight: in this part of Broward County, a track-style sliding gate needs more attention because sand and debris get into the track and cause wear. We steer most Melrose Park homeowners toward cantilever setups that ride above the ground and don’t jam on the first rainy afternoon.
Sliding gates add $400 to $900 for the track or cantilever hardware on top of the base gate cost.
Do I need a Broward County permit to install a new driveway gate in Melrose Park?
Yes, in most cases. Melrose Park is unincorporated Broward County, so gate permits and inspections are handled by the Broward County Building Division, not a municipal office. A new driveway gate with an operator typically requires a permit, and the county will inspect the electrical connection and footing depth. We pull the permit, schedule the inspection, and handle the paperwork so you don’t have to navigate the county website.
What kind of gate holds up best against wind load and salt air near the Intracoastal?
Aluminum gates with stainless or zinc-plated hardware hold up best in Melrose Park’s salt air. They’re lighter than steel, which helps with wind load, and they don’t rust through the way original ornamental iron does. A slatted or perforated aluminum panel reduces wind load significantly and still gives you privacy. Call (877) 610-2993 for a free measure and a written price.
Gate Motor & Opener in Melrose Park
When a gate motor in Melrose Park quits, it usually quits on the worst possible morning. A gate motor repair here runs $185 to $385 for most common failures, and a full motor replacement typically lands between $650 and $1,400 depending on the arm style and brand. Hal’s crew shows up with parts on the truck, knows the difference between a Broward County code issue and a simple relay failure, and gets your driveway moving again. We service Viking, DoorKing, and Ghost Controls motors regularly, along with the other major brands. Details are on our Gate Motor & Opener page.
Motor Installation
A new gate motor installation in Melrose Park starts with the question of what’s already in the ground. Many original ranch homes here were built when a driveway gate meant a concrete post and a padlock, so retrofitting a modern operator often means re-anchoring the column first, not just bolting a box to a bracket. We install and calibrate the motor to your specific gate weight, swing distance, and post condition, then run the full open-close cycle multiple times while you watch.
A new motor installation, including labor, brackets, and calibration, typically lands between $650 and $1,400 depending on arm style, gate weight, and brand.
Motor Repair
Most gate motor repair calls in Melrose Park are not motor failures at all. A corroded limit switch, a cracked circuit board connection, or a photo-eye knocked out of alignment by a storm can all mimic a dead motor. Hal’s crew diagnoses before replacing anything, then tells you honestly if the fix is a $190 switch or a $900 arm. We don’t swap parts that don’t need swapping.
Component-level fixes like limit switches, capacitor replacement, and photo-eye alignment generally run $185 to $385.
Slide Motor
Slide motor repair in Melrose Park comes with a structural caveat: older sliding gates here were often set on original shallow concrete that has cracked or settled over decades of South Florida’s wet-dry soil cycles. A slide motor that grinds or trips repeatedly is usually telling you the track is out of level, not that the motor is weak. We check the mechanical alignment before the electrical side, because fixing a slide motor on a crooked track means fixing it twice.
Slide motor replacement with track adjustment runs toward the higher end of the $650 to $1,400 range.
Can you come today for an emergency gate motor repair in Melrose Park?
In most cases, yes. Same-day and 24-7 emergency service is available for Melrose Park homeowners when the gate is stuck open, stuck closed, or won’t respond at all. We carry the common parts for Viking, DoorKing, and Ghost Controls motors on the truck so we’re not making you wait on a shipment. Call (877) 610-2993 and we’ll tell you straight if we can hit it today.
Is gate motor repair more expensive in Melrose Park than nearby cities?
No. Our pricing is flat across Broward County, so you won’t pay a Melrose Park premium compared to Fort Lauderdale or Davie. The factors that actually move the price are your gate’s weight, post condition, and motor type, not your ZIP code. There’s no trip charge inside the county, and every quote is agreed before work starts.
Gate Access Control in Melrose Park
Gate access control in Melrose Park means keypads, intercoms, card readers, and phone-entry systems that actually hold up to salt air, afternoon downpours, and decades-old gate posts. A keypad replacement here typically runs $180 to $420, and a phone-entry system installed runs $650 to $1,400. We repair and install all of it, and we’re familiar with the specific headaches this neighborhood throws at gate hardware. The full scope is on our Gate Access Control page.
Keypad Entry
Keypad entry is the most common access control request in Melrose Park, and the failure we see most often isn’t electronic. Keypads mounted on unshaded south-facing pillars bake in 95-degree heat, then get hammered by afternoon storms. The membrane delaminates, moisture gets inside, and the board shorts. We replace them with weather-sealed units rated for direct sun exposure, and we reposition the keypad off the hottest face of the pillar when the layout allows.
A typical keypad repair or replacement in Melrose Park runs $180 to $420, including the hardware.
Phone Entry
Phone-entry systems let you buzz a visitor through from your cell phone, or route the call to a house phone. For Melrose Park’s ranch homes with gates at the driveway’s edge, this usually means a cellular-based unit because running a second landline to the gate post isn’t worth the trenching. We handle the power run, the mounting, and the programming.
Phone entry installation in Melrose Park typically runs $650 to $1,400, including hardware, labor, and testing.
Card Reader
Card readers suit Melrose Park homes with regular service visits: housekeepers, landscapers, pool service. We install standalone readers and integrated systems that log every entry. Because Broward County requires entrapment protection on automated gates, we check the photo sensors and reversing loop as part of any card reader install.
Card reader installation in Melrose Park runs $700 to $1,600 depending on whether we’re adding a reader to an existing operator or installing a full access-control panel.
Why does salt air near the Intracoastal affect access control hardware in Melrose Park?
Salt air accelerates oxidation on the external connections, mounting hardware, and wiring terminals of any access control system. Keypads corrode at the connector, card reader housings pit, and intercom buttons stick. We use stainless fasteners, sealed connections, and enclosures rated for coastal environments on every Melrose Park install. Call (877) 610-2993 for a free estimate.
What entrapment protection is required for an automatic gate in Broward County when I upgrade to phone entry?
Broward County requires entrapment protection on any automated gate, which means photo sensors, reversing loops, or both, depending on the gate type and operator class. When you upgrade to phone entry, the county considers the gate automated, so the protection has to be present and functioning. We test and, if needed, install the safety edges and reversing loop as part of the phone-entry upgrade. It’s not optional, and we won’t do the job without it.
Gate Parts & Welding in Melrose Park
Most gate parts and welding jobs in Melrose Park run between $180 and $650 depending on what failed and where. A worn hinge, a tilted post, or a broken weld is repairable, usually in one visit. We pull right up to your driveway with the welder, the steel, and the parts, so your gate never leaves your property. The full breakdown is on our Gate Parts & Welding page.
Hinge Replacement
Gate hinges in Melrose Park take a beating from salt air drifting in off the Intracoastal. Original barrel hinges on 1960s ornamental iron gates corrode from the inside out, and once the barrel seizes, the gate starts to drag and bind on the latch. We cut off the old hinge, dress the post face, and weld a new heavy-wall hinge barrel in place, greased and aligned so the gate swings free.
Hinge replacement, welded on site, runs $180 to $340.
Post Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start in Melrose Park. Original posts here were often set directly into coral rock fill or shallow concrete with no proper footing. After decades of wet-dry cycles and hurricane gusts, the post tilts, the gate leaf pulls away, and every latch adjustment fails. We excavate, pour a new footing, set the post plumb, and weld any hinge post sleeve or reinforcement the job calls for. Fix the post once, and you won’t fix it twice.
Post replacement, including excavation, new footing, and reset, runs $450 to $850.
Custom Welding
Sometimes the part your gate needs doesn’t exist on a shelf. A 1960s latch bracket, a hinge plate with odd bolt spacing, a bent operator arm, a gate leaf extension after a new concrete pour. Hal welds it from steel, on site, to match what’s already there. If the old iron is salvageable, we repair it. If a fabrication makes more sense than a patch, we’ll tell you straight and show you the price before we start.
Custom welding, fabricating a bracket, arm, or plate on site, runs $150 to $500.
After a storm, my Melrose Park swing gate sags and won’t latch. Should I weld the panel or replace the hinge post?
Usually the hinge post, not the panel. If the post is leaning even an inch off plumb, welding the panel or adjusting the latch will last a few weeks at best. We measure for tilt first. In Melrose Park, where original posts were often set into coral rock with no footing, re-plumbing and re-footing the post is the repair that actually holds. Call (877) 610-2993 and we’ll tell you in plain terms.
Can you weld a rusted latch on an original 1960s ornamental iron gate, or does the whole post need replacement?
If the post is still plumb and the latch body has enough steel left around the mounting area, we can weld a fresh latch bracket right onto it and keep the original gate in place. If the post itself has thinned from rust or tilted, welding new hardware onto it will just move the failure point. We’ll show you the condition with the gate in front of you.
Brands We Service in Melrose Park
We service nine major gate brands across Melrose Park: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common parts for Viking, DoorKing, and Ghost Controls on the truck for Melrose Park service calls, so we’re not waiting on a shipment while your gate sits open. See our brands for the full list.
Pricing for Gate Repair in Melrose Park, FL
| Service | Typical range in Melrose Park |
|---|---|
| Hinge replacement or latch repair | $145 - $285 |
| Post re-plumbing or re-setting (per post) | $350 - $750 |
| Electric gate motor replacement | $600 - $1,400 |
| Basic aluminum pedestrian gate | From $850 |
| Steel double swing gate with operator | $3,500 - $5,500 |
| Sliding gate hardware (track or cantilever) | $400 - $900 |
| Gate motor repair (component-level) | $185 - $385 |
| Keypad replacement | $180 - $420 |
| Phone entry system installed | $650 - $1,400 |
| Card reader installation | $700 - $1,600 |
| Hinge replacement (welded on site) | $180 - $340 |
| Post replacement (excavate and reset) | $450 - $850 |
What pushes the price up in Melrose Park is usually the footing. Original posts set in coral rock or sand need more excavation and a deeper pour than a newer-home neighborhood would. The other factor is salt corrosion: cutting back rusted steel to get to solid material takes time. Whatever the number, you get it in writing before we begin, and that’s the price you pay. There’s no trip charge inside the county.
Neighborhoods We Serve in Melrose Park
We work across the entire 33308 zip code in Melrose Park, from the streets west of the Intracoastal to the western edge approaching NW 34th Avenue. The calls come from every corner of the neighborhood, but these are the areas we know best:
- Homes along NW 21st Avenue and the blocks east of the railroad
- Streets south of NW 28th Street near the school
- Properties off NW 31st Avenue near the canal
- The western edge approaching NW 34th Avenue
Response time across Melrose Park is typically same-day for urgent issues, with afternoon and early-evening windows available. For non-urgent repair, we schedule an exact window and hold to it.
Service Area - Cities Near Melrose Park
We serve the neighborhoods around Melrose Park, FL, including Melrose Park, Fort Lauderdale, Broadview Park, Davie, Lauderhill, and Lauderdale Lakes. If your gate is acting up and you’re anywhere in this part of Broward County, call us. The same crew, the same pricing, the same written promise.
Serving Melrose Park, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve Melrose Park and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the Melrose Park coverage area; if your address is on it, we can help.
Also serving nearby: Melrose Park, FL, Fort Lauderdale, FL, Broadview Park, FL, Davie, FL, Lauderhill, FL, Lauderdale Lakes, FL.
FAQs About Gate Repair in Melrose Park
For urgent repairs like a gate stuck open or refusing to close, we can typically reach most Melrose Park addresses the same day, often within a couple of hours when you call before early afternoon. A live person answers 24/7 at (877) 610-2993 and will confirm a time window before you hang up.
It depends on the scope. New driveway gate installations with an operator, structural post work, and new electrical connections generally require a permit through the Broward County Building Division since Melrose Park is unincorporated. We pull the permit, schedule the inspection, and handle the paperwork. Call us and we’ll tell you what your specific job needs.
Pricing is flat across Broward County. You won’t pay a Melrose Park premium compared to Fort Lauderdale or Davie, and there’s no trip charge inside the county. The factors that move the price are your gate’s weight, post condition, and the extent of salt corrosion, not your street address. Every quote is agreed before work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Melrose Park Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg