Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Clinton
If you’re on a hillside lot or a long gravel driveway outside Clinton, you already know a gate is a different animal here than it is in town. We install driveway gates, swing gates, sliding gates, and double gates across Clinton and Anderson County, and we size every job for the red clay, the slope, and the freeze-thaw cycle that punishes cheap work. Call (877) 610-2993 and you’ll get a live person, not a voicemail. We quote the price before we start, and it doesn’t change at the door.
Why Gatewood Fence & Gate Is Clinton’s Preferred Gate Installation Company
Hal Gatewood has been working on gates since 2001, and he still answers the phone himself. That matters here because Clinton is a small town where word travels, and a company that quoted one price on the phone and charged another at the door wouldn’t last two seasons. Our reputation in Clinton is built on showing up in the window we promised, welding on site instead of hauling your gate off, and putting the 90-Day Done Right Promise in writing on every invoice.
We serve the 37716 and 37717 ZIP codes regularly, and we know the difference between a gate in a 1960s neighborhood off Charles Seivers Boulevard and one on a ridge-top lot where the wind comes through the Clinch River valley and loads the panels like a sail. If you call us from Clinton, the person who answers knows the terrain. If it’s urgent, we tell you straight when we can be there and then we’re there. No dispatch queue, no call center three states away.
Hal’s name is on the shop and on every invoice. That’s the oldest accountability there is. When we say we’ll fix the post instead of just the panel, we mean it, because we’ll see you at the hardware store next month.
Our Gate Installation Services in Clinton
Every gate we install in Clinton starts with the ground under it. Red clay moves here in ways flatter Tennessee doesn’t, and a post set shallow or without proper concrete will be out of plumb by spring. We dig deeper, reinforce with rebar, and build for the grade.
Driveway Gate
Driveway gates in Clinton run the range from a single swing gate on a city lot to a 20-foot sliding gate guarding a pasture entrance. We measure the driveway width, the slope at the hinge posts, and the swing arc so the gate never binds on the high side. For long driveways off roads like Sulphur Springs Road, we often recommend a slide rather than a swing. The ground falls away, and a swing gate wants to sag into the downhill post.
Pedestrian Gate
Plenty of Clinton homes with perimeter fencing from the 1960s and 70s need a walk gate that actually closes square and latches without a hip check. We build pedestrian gates to match the existing fence, set the posts to handle the clay movement, and hang them so a kid can open them one-handed.
Sliding Gate
Sliding gates make sense on Clinton driveways where the grade rises or falls sharply. Instead of fighting the slope with a swing panel, the gate rolls along a track or runs on a cantilever system. We see a lot of track failures here in winter, when ice storms coat the rail and rack and then thawing clay under the post footings shifts everything a half inch. A properly set foundation and a heated track or grade-adjusted rail solves most of it. We stock Viking and DoorKing slides and we know how they behave in Anderson County cold.
Swing Gate
A swing gate on a Clinton hillside needs more than a pair of hinges and an operator. It needs heavy-duty adjustable hinges that can be re-trued after winter, a post depth that gets below the freeze line into stable clay, and a motor sized for the panel’s wind load, not just its weight. We install single and double swing gates, and we set the hinge posts 48 inches deep with concrete collars when the soil at the site is clay-heavy, which is most of Clinton and the surrounding ridges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clinton
We install and service operators from Ghost Controls, DoorKing, and Viking, among others. We don’t push whatever’s on the truck. We match the operator to the gate, the grade, and how many cycles a day it’ll run. For Clinton customers who need a part, we keep common boards, remotes, and photo-eyes in stock, which means we can usually finish the job in one trip instead of ordering a part and coming back next week. If your operator is getting weak or slamming, call us before it takes out a hinge. A gate closing on its own is a gate failing on its own.
Common Gate Installation Problems We See in Clinton Homes
- Posts out of plumb from freeze-thaw. Clinton’s red clay expands and contracts through winter and spring, and a post set 24 inches deep is rarely enough. We set hinge posts deeper and reinforce them so they stay square through the cycle.
- Swing gates binding on sloped driveways. The grade changes after winter soil movement, and a gate that swung clean in October starts dragging in March. Adjustable hinges and correctly located pivot points prevent this.
- Slide gates jumping the track after ice storms. When ice coats the rail and rack, then the clay shifts as it thaws, the gate can misalign and ride up off the track. Proper footings and a track system rated for the load stop the damage.
- Operators failing early on wide farm gates. An opener sized for a suburban gate will burn out trying to move a 16-foot wooden farm gate against a valley wind. We size operators for the gate’s actual wind load and duty cycle, not just its listed weight.
Pricing for Gate Installation in Clinton, TN
A single swing driveway gate in Clinton typically runs $1,800 to $3,500 installed, depending on the operator and the post work. A double swing gate for a wider opening lands between $3,000 and $6,500. Sliding gates run $2,500 to $6,000, with the higher end covering heavy steel panels and cantilever hardware. Long rural driveways that need a solar setup instead of a utility power run will add $800 to $1,500 for the panel kit and battery array. Every quote is a written, line-item price you sign off on before any work starts. We offer $40 off any repair over $200, no trip charge inside Anderson County, and a free second opinion on any written estimate. Seniors and veterans save 10% permanently.
We Also Serve Cities Near Clinton
While this page is for Clinton, our crews cover Oak Ridge, Knoxville, Farragut, and Lenoir City as well. If you’re on the county line or just outside the 37716 ZIP, call and we’ll tell you straight whether we service your road. You can learn more about our broader Gate Installation work or check the Clinton page for more local detail.
Serving Clinton, TN - Our Local Coverage Area
We’re based in the Clinton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Clinton
Hinge posts should be set a minimum of 36 inches deep in Clinton, and 48 inches where the soil is clay-heavy or the gate is wide or solid-panel. Shallower posts heave out of plumb every winter. Call (877) 610-2993 and we’ll come look at your grade before quoting.
Yes. Solar gate openers work well on long driveways in Clinton where running utility power would mean trenching hundreds of feet through red clay. We size the panel and battery to the operator and the number of cycles per day, and we mount the panel where the tree canopy doesn’t shade it. We installed exactly this setup off Sulphur Springs Road, using a LiftMaster LA412 and a solar kit because the power run would have been 300 feet of trenching.
Your sliding gate comes off its track every spring because freeze-thaw cycles and heavy rain move the clay under the post footings. The track shifts, the gate runs out of alignment, and a rail that was true in October is fighting the gate by March. The fix is deeper footings, a properly bedded track, and a realignment check before winter arrives. Call (877) 610-2993 and we’ll get it running true.
Automatic gates in Anderson County must comply with UL 325 safety standards, which means photo-eyes, force-sensing edges or an inherent entrapment sensor, and warning signage where the gate operates across a pedestrian path. We install photo-eyes on both sides of every automatic gate and set the force limits correctly before we leave. Safety isn’t an upsell; it’s the difference between a gate and a liability.
We do. Wide farm gates on Clinton acreage need operators rated for continuous duty and high wind loads, not residential units sized for a suburban panel. We install DoorKing and Viking commercial-duty operators on farm gates and we set the limits so a tractor pulling a stock trailer clears without riding the panel. Call (877) 610-2993 and tell us the gate width and what passes through it. We’ll spec it right the first time.
If you need a gate installed in Clinton, call Gatewood Fence & Gate at (877) 610-2993. A live person answers around the clock, and estimates are free. You’ll get a written price before we start, and it won’t change at the door. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Clinton and Anderson County since 2001.