Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Aurora
A gate installation in Aurora, OH usually falls between $2,800 and $9,500 depending on the gate style, operator type, and what’s already in the ground. Call (877) 610-2993 and we’ll give you a written price before any work starts. Hal Gatewood has been building and repairing gates since 2001, and his name is on every job that leaves the shop. If you live off Page Road or in one of the newer subdivisions north of Ravenna Road, you’ve likely seen our trucks. We’re local, we answer the phone, and we don’t send a call center three states away.
Key Takeaways
- Driveway gate installation in Aurora typically runs $2,800-$9,500; simple pedestrian gates start around $1,200.
- If your subdivision has an HOA, you’ll likely need architectural approval before any gate goes in. We help with that paperwork.
- Many Aurora communities built in the 1990s still run obsolete FAAC or Linear underground operators. We replace those with modern above-ground systems without changing your gate style.
- Every job carries our 90-Day Done Right Promise in writing, and calls are answered by a live person 24/7.
Why Gatewood Fence & Gate Is Aurora’s Preferred Gate Installation Company
Aurora has a particular kind of gate problem, and we’ve been fixing it for a long time. The subdivisions built during the 1990s real estate boom along Routes 43 and 82 used ornamental iron gates with underground operators, which is why our Gate Repair - Aurora team sees these systems so often. Those FAAC and Linear actuator systems are now obsolete. Parts are scarce. When a freeze-thaw cycle heaves the vault, the actuator seizes, and the fix is a full operator replacement rather than a repair. We stock the modern equivalents and have the welding equipment to match new hardware to old iron.
Hal has been owner-operated since 2001. The published address and license number mean anyone in Aurora can verify who they’re dealing with. Our crew is background-checked and uniformed. When you call (877) 610-2993, a live person answers. Not a voicemail, not a chatbot, not a dispatch queue. That matters when your gate won’t open at 6:45 a.m. and you need to get to the freeway.
We also understand the approval process. Most HOAs in Aurora, including community associations around Barrington and Four Seasons, require architectural committee sign-off on gate style, height, finish, and operator placement. We help homeowners and management companies prepare the submittal with measurements, material specs, and photos. It saves weeks of back-and-forth.
Our Gate Installation Services in Aurora
Every Aurora installation starts with a site visit, not a phone quote. We measure the driveway, check the grade, locate existing conduit and power, and look at what’s in the ground. Then we write the price. No surprises at the door. Here’s what we install most often in Aurora.
Driveway Gate
Aurora’s housing stock skews toward large single-family homes on wooded lots, which means private driveway gates are common. We install single and double driveway gates with openers suited to the width, weight, and how often they cycle each day. For homes off Pioneer Trail or in the newer estates near Geauga Lake, we typically recommend a slide gate if the driveway has room, because swing gates on sloped driveways bind faster. A standard single driveway gate with operator in Aurora runs $3,200-$7,800 installed.
Pedestrian Gate
Pedestrian gates in Aurora are usually paired with an existing fence or a separate entry from the sidewalk. These are smaller jobs but they fail the same way: post heave from freeze-thaw, rust at the hinge welds, worn latch hardware. A new pedestrian gate with a keypad or keyed entry runs $1,200-$3,400 depending on material and whether we’re pouring a new post footing. We’ve installed them at HOA pool enclosures, garden entries, and side-yard access points throughout 44202.
Sliding Gate
Sliding gates are the workhorse for Aurora subdivision entrances and wide driveway openings. They don’t swing into the street or over a sloped apron, and they hold up better in snow country because the gate rides on a track above the frost line instead of hanging from hinge posts. We install both wheeled V-track and cantilever slide gates. For shared community entries, we match the gate to the existing architectural style and coordinate our Gate Access Control in Aurora with the HOA. A single-panel slide gate with operator in Aurora runs $4,500-$9,500.
Swing Gate
Swing gates are the classic Aurora look, especially on brick colonials and custom builds with ornamental iron. The problem in northeast Ohio is the freeze-thaw cycle. Concrete around the hinge post cracks, the post leans, and the gate starts dragging against the ground. We fix that at the root: new post footing, proper depth below frost line, and if the gate is ornamental iron, Gate Parts & Welding in Aurora to re-align the panel on-site. Single swing gate installations start around $2,800 and go up with iron work and automation.
Double Gate
Double gates are common at Aurora subdivision entrances and estate driveways wide enough for two cars. They require matched openers, a center stop or latch, and careful alignment so both leaves close squarely. We install double swing and double slide gates, and we handle the low-voltage wiring, safety photocells, and access control integration. A double gate installation in Aurora with operators typically runs $6,000-$12,000, or more if we’re replacing an old underground actuator system at a community entrance.
We also install Gate Installation hardware of all types. Hal has been welding on site since 2001, so a repair or custom bracket that would take a national company three weeks to order is usually done the day we visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aurora
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Aurora customers, that matters in a specific way. Many of the 1990s-era subdivisions around 44202 still run early FAAC and Linear underground actuators. Those units are discontinued. We keep the modern equivalents on the shelf, and we’ll quote you a fair replacement rather than trying to band-aid a seized vault. If a homeowner or HOA has a Ghost Controls or DoorKing opener from a newer installation, we service those too.
We stock local parts for Aurora customers because waiting two weeks for a control board when your gate won’t open is the kind of thing that loses board members. We’d rather have the part in the truck.
Common Gate Installation Problems We See in Aurora Homes
- Freeze-thaw heaving cracks hinge post concrete. Aurora sits in the lake-effect snow belt where 80-100 inches of snow per season is normal, and the repeated freezing and thawing heaves posts set in shallow concrete. A swing gate that barely clears the ground in June is dragging by February. The fix is a new post footing poured below the frost line.
- Road salt corrodes ornamental iron weld joints. Plowed subdivision streets throw salt-laced slush onto gate panels all winter. Ornamental iron, especially near hinge posts, develops rust that creeps into the weld joints. We see panel cracks near hinge posts more often in Aurora than in neighboring Portage County towns, because the ironwork here is older and the salt exposure is constant.
- Obsolete FAAC and Linear underground actuators seize after snowmelt. The 1990s-era community entrance gates around Aurora were built with early-generation underground linear actuators. Parts are now scarce. After a hard winter, the vault floods, the actuator seizes, and the most honest quote is a full operator replacement with a modern above-ground system.
- HOA shared entry systems fail in the cold. Community gates that cycle dozens of times a day put load on older control boards. In January, after months of cycling in single-digit temperatures, we see intermittent failures on keypad readers and safety photocells. We replace them with systems rated for continuous outdoor use, not the cheapest board that fits the old enclosure.
One job that stuck with us: we replaced a failed FAAC underground swing gate operator at the entrance of the Barrington subdivision after a late-winter thaw flooded the vault and seized the linear actuator. The HOA had already gotten architectural approval for the replacement matched to the original iron gate’s style. Our crew poured a new post footing, installed a LiftMaster slide gate operator with a rack and pinion drive, and wired in fresh safety photocells and a keypad entry system before the next board meeting. That’s the kind of job we do regularly in Aurora.
Do I Need HOA Architectural Approval Before Installing a New Gate in Aurora?
Yes, in most Aurora subdivisions with a homeowner association, you need architectural committee approval before a gate goes in. The typical Aurora HOA requires submittal of gate style, height, finish, and whether the gate swings or slides. We help with that paperwork. Hal and his crew know what the boards around Barrington, Four Seasons, and other 44202 communities typically ask for, and we’ll give you the measurements, material specs, and photos that make the submittal go through the first time. We will also install to the board-approved spec exactly, so there’s no rework after an inspection.
Pricing for Gate Installation in Aurora, OH
Here’s what you can expect to pay in Aurora’s market, and we’ll hold to these numbers once we’ve seen the site. A single swing gate with opener on a residential driveway runs $2,800-$6,800. A double gate at a wide driveway or subdivision entrance runs $6,000-$12,000. A slide gate, which we recommend for most new installations on sloped Aurora driveways, runs $4,500-$9,500. A pedestrian gate runs $1,200-$3,400.
What moves the price is the material, the operator type, and what’s already underground. If we’re replacing an old underground actuator with a modern above-ground system, there’s concrete and electrical work involved. If the existing post footings are cracked, we pour new ones. We quote all of that up front, in writing, and the price is agreed before we start. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Our Gate Installation in Aurora estimates are free.
We Also Serve Cities Near Aurora
Our crews work throughout the northeast Ohio suburbs, and we get to Aurora quickly. We also serve Streetsboro, Twinsburg, Solon, and Macedonia. If you’re in one of those towns and you need a gate installed or an old one diagnosed, call (877) 610-2993. Hal’s name is on the shop, and the shop is down the road.
Serving Aurora, OH - Our Local Coverage Area
We’re based in the Aurora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Aurora
Yes, if your Aurora home is in an HOA-governed subdivision, you’ll likely need architectural committee approval first. Most boards require gate style, height, finish, and operator type submitted before installation. We help prepare the submittal and install to the approved spec. Call (877) 610-2993 and we’ll help with the paperwork.
Yes, in most cases. A cantilever slide gate rides on rollers above a concrete track and doesn’t drag on the driveway surface, so it handles sloped aprons better than a swing gate. We’ll check the side clearance and grade during the free site visit and tell you if a slide gate works on your specific driveway. Call (877) 610-2993 to schedule.
We install and service community entry gates for Aurora HOAs, including the access control, keypads, safety photocells, and operator replacement. We coordinate with the management company and the architectural committee, and we’ll schedule work around board meetings and resident traffic. Our crews have been doing this since 2001, and we carry the brands those 1990s-era Aurora systems were built with. Call (877) 610-2993 to discuss your community’s system.
In Aurora, it’s usually frost heave in the hinge post footing. The concrete cracks below grade, the post leans, and the gate panel binds against the ground. The hinges look fine because they’re not the problem. We fix it by pouring a new footing below the frost line and re-aligning the gate, often with on-site welding to repair stress cracks at the hinge post. Call (877) 610-2993 for a diagnosis.
Yes. We do this regularly on Aurora subdivision entrances built in the 1990s. The old underground actuator gets disconnected, the vault is abandoned properly, and we install a modern above-ground operator matched to the existing gate’s weight and cycle rate. The gate panel and its architectural style don’t change. Your HOA gets a more reliable system, and you stop searching for discontinued FAAC parts. Call (877) 610-2993 for a free estimate.
Get Your Aurora Gate Installation Started Today
If your gate is sagging, seized, outdated, or you’re starting from scratch, call (877) 610-2993. Hal Gatewood will talk to you himself, answer straight, and show up when he says he will. We serve all of Aurora, OH 44202, including the subdivisions and estates throughout the city. Free estimates, written upfront pricing, and the 90-Day Done Right Promise on every job. You can drive to the shop and look Hal in the eye. Or just call. He’ll answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Aurora since 2001.