Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Memphis
Gate access control in Memphis usually fails for one reason most companies never check: the ground moved. The electronics are fine. The post underneath the opener has heaved, tilted, or drifted in the expansive Shelby County clay, and now the limit switch trips mid-cycle or the gate binds against the latch. We fix the post first, then the opener. That’s why our work holds up through Memphis springs and summers when other repairs don’t. Call (877) 610-2993 and a live person answers, day or night. If you’re near Midtown, Frayser, Whitehaven, or out past Winchester Road, we’ll be there with a straight answer and a written price before any work starts.
Why Gatewood Fence & Gate Is Memphis’s Preferred Gate Access Control Company
Hal Gatewood started this shop in 2001 and his name is still on the door. That matters in Memphis, where the older neighborhoods have a way of testing a gate company. We’ve rebuilt ornamental wrought iron swing gates in Midtown that were hung when the streets were first paved, and we’ve wired keypads on 20-foot farm slide gates where the nearest power pole is half a mile away. Memphis homeowners keep our number because we weld on site, we don’t haul gates back to a shop across town, and the person who shows up is the same person you can find at the shop.
Every job comes with our 90-Day Done Right Promise in writing. If the gate drifts, the keypad acts up, or the intercom buzzes, one call brings us back. No runaround. Customers in New South Memphis, Germantown, Bartlett, and Millington have called us for years for the same reason: when a gate opener quits at 11 p.m., a live person answers our phone and tells you honestly what’s wrong and what it’ll take.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Hal and his crew work on Gate Access Control systems in residential Memphis every week, not as a side line. We’re certified on Linear, Viking, Ghost Controls, and DoorKing equipment, and we stock the common parts in the shop rather than waiting for a distributor to ship them.
Our Gate Access Control Services in Memphis
Keypad Entry
A keypad entry system in Memphis does double duty here: it keeps out porch thieves and gives your people a code instead of a remote that gets lost in the truck. We install wired and wireless keypads on gates across 38112, 38113, 38114, and 38115. In Midtown, where sidewalks sit close to the street, we mount keypads on a short post rather than the gate itself so the gate’s daily swing doesn’t rip the low-voltage wire.

Remote Control
Remote controls for Memphis gates fail in patterns we see coming. The humidity near the Mississippi River corrodes battery contacts in remotes left in cars. The real problem, though, is usually a receiver antenna crimped against a metal post during installation. We mount receivers properly on the gate frame with a standoff, then sync remotes and walk away only after the gate cycles cleanly three times. Out toward the Shelby County line, we program long-range remotes so you can open the gate from the road instead of waiting at the keypad in the rain.

Solar Gate Opener
On acreage entrances along Winchester Road and rural Frayser, running conduit to a gate at the far end of a 600-foot driveway costs more than the opener itself. A solar gate opener makes sense there, but only if the panel is sized for Memphis weather. Winter ice storms cut the charging hours, and long cloudy stretches in early spring drain undersized batteries. We size the panel, battery bank, and operator as one system, and we anchor the panel to a post that won’t tilt when the clay heaves.

Video Intercom
Video intercoms for Memphis gates work differently depending on where you live. In Midtown, wifi reaches the gate easily and we install systems that ring your phone with a live feed. On an acreage entrance with no wifi, we use cellular or point-to-point radio bridges, and the person at the door can hold a conversation while you’re in the kitchen. We install hardware that handles Memphis heat and humidity without fogging the camera lens or killing the speaker after a single summer.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Memphis
We work on Linear, Viking, Ghost Controls, and DoorKing gates across Memphis, along with FAAC, BFT, LiftMaster, Mighty Mule, and Elite. Hal has serviced these brands since 2001, which means when a DoorKing arm operator from the early 2000s starts grinding on a Bartlett driveway gate, we usually have the bracket or limit switch in the shop. We stock common Memphis parts locally, and for older equipment we will tell you plainly whether the repair is worth it or whether a replacement opener makes more sense. You won’t get a pitch to replace a $40 part with a $1,200 operator.
Common Gate Access Control Problems We See in Memphis Homes
- Clay soil heave knocks the post out of plumb. Shelby County clay swells in wet springs and shrinks in dry summers. A post that moves half an inch is enough to trip a solar swing operator’s limit switch mid-cycle and leave the gate hanging open at night.
- Ice storms coat slide gate racks and shear the drive pins. Memphis gets ice, not snow. When ice forms on a rack and pinion, then a warm day arrives, the thermal contraction binds the drive gear, and the pin or key shears. We replace the pin and adjust the operator torque so it doesn’t re-shear the next freeze.
- Phone entry systems lose connectivity in shifting conduits. Rural underground conduit in Memphis sits in the same expansive clay as the posts. When the clay shrinks in dry summer heat, the conduit can kink and pinch the low-voltage line to the telephone entry unit, cutting the signal to the house.
- Old Midtown iron gates with new openers bind at the hinges. Century-old wrought iron gates on Crosby or Peabody were built to swing by hand, not to cycle under motor power twice a day. The operators work fine; the hinges are original and worn oval. We rebuild the hinge barrels and re-align the leaf before installing or re-tuning the opener.
Pricing for Gate Access Control in Memphis, TN
A typical keypad entry installation in Memphis runs $325-$650, depending on whether conduit already exists and whether the post needs resetting. Remote control programming and receiver replacement usually runs $120-$275. A solar gate opener in rural Memphis runs $1,400-$2,900 installed, including the panel, battery, and operator. Video intercom systems for Memphis gates range from $800-$2,200 depending on whether you have wifi at the gate or need a cellular bridge. A service call to diagnose an opener fault in the Metro area is free if we do the repair. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Every price is quoted and agreed before we begin work, and you’ll never be handed a larger invoice at the door. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Memphis
Our schedule regularly takes us through New South Memphis, Germantown, Bartlett, and Millington, and we treat each as its own job rather than a stop on a route. If you’re searching specifically for Gate Access Control in Memphis, you’ll find the same live phone answer and straight pricing whether you’re inside the 240 loop or out past the county line.
Serving Memphis, TN - Our Local Coverage Area
We’re based in the Memphis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Memphis
Because the original post was set without a deep concrete collar in expansive Shelby County clay, and your opener is moving every time the ground does. The fix is to reset the post deeper and wider than the original footing, re-hang the gate, and re-tune the opener limits so the gate closes against the stop without tripping. Call (877) 610-2993 and we’ll do exactly that.
Yes, as long as the panel and battery are sized for Memphis’s winter ice storms and early-spring cloud cover, not for a sunny July afternoon. Hal sizes the whole system by the gate’s daily cycles and the local shade pattern, then programs the board for a low-voltage cutoff so the battery bank doesn’t sulfate. Call for a free site look and a written number.
Most likely, the keypad’s internal battery or wiring connector contracted in the cold and opened, or water entered the unit during the ice storm and shorted the board when it thawed. We warrant our repair for 90 days, but the keypad needs to be sealed for Memphis, not for Arizona. We install weather-rated units with a silicone seal and dielectric grease on the terminals.
The track supports are sinking or the post has moved. A 20-foot slide gate puts serious load on the ground, and when Memphis’s clay dries and shrinks, the whole track can drop half an inch at the midpoint. We raise and re-anchor the track, rebuild the post concrete if needed, and reset the operator gear so the gate rolls clean through the full travel.
Yes, with a point-to-point radio bridge or a cellular gateway. We install video intercoms on rural Memphis gates regularly, and the feed can ring to your phone from anywhere. If you’re near Frayser or Millington and want to see who’s at the gate before you open it, call (877) 610-2993 and we’ll set it up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Memphis since 2001.





Before
After
Before
After
Before
After