Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Wellington
Gate repair in Wellington usually means one of three things: a surge-fried control board, a sagging hinge post, or a slide gate binding in its track after rain. We fix all three, usually same-day. Hal Gatewood has been at this since 2001, and his crew works the Wellington area weekly. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Wellington’s Preferred Gate Repair Company
Wellington is a different animal than Royal Palm Beach or Greenacres. The gates here are wider, heavier, and harder-working. We know that before we even pull into the driveway. Hal’s name is on the shop and on every invoice, and the shop’s address is published for anyone who wants to look him in the eye. That’s the accountability that matters when you’re trusting someone with a gate that secures your horses, your equipment, and your family.
Our Wellington customers tend to call us twice: once after a storm, and once after a national outfit quoted a replacement instead of a repair. We’d rather weld a cracked hinge than swap a whole leaf. We’d rather replace a $90 board than a $1,400 operator. And if it’s not done right, the 90-Day Done Right Promise is in writing, not buried in fine print. One call brings Hal back.
Response time to Wellington is quick, because scheduling runs from the South Florida office and crews are already serving the area locally. We’re not driving from three counties away. A live person answers the phone 24/7. No voicemail, no dispatch queue, no chatbot.
Our Gate Repair Services in Wellington
Electric Gate Repair
Lightning season in Wellington is brutal on gate electronics. Near-daily afternoon thunderstorms from June through September send surges through power lines that fry control boards on LiftMaster and Linear operators. We stock common boards locally for Wellington customers, which means we can often repair the same day rather than waiting on a part to ship.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. In Wellington’s sandy soil, posts shift over time, especially on the wide, heavy leaves common in the equestrian preserve. We repair and reset hinge posts, weld reinforcements where the original builder cut corners, and get the gate swinging true again. Fix the panel without the post and you’ll fix it twice.
Weld & Rust Repair
Rust on a custom iron gate is more than cosmetic. At stress points like hinge tabs and bottom rails, it’s structural. We weld on site, in your driveway, so the gate never leaves your property. That means no flatbed, no fork truck, no week in a shop. For ornamental gates on the estate lots off South Shore Boulevard or down in the 33414 preserve area, we’ll match the original steel profile so the repair doesn’t look like a patch.
Gate Realignment
Slide gates bind for two reasons in Wellington: standing water in the track channels after heavy rain, and rollers worn uneven from constant use during the Winter Equestrian Festival season. Realignment is usually a same-visit fix. We’ll square the leaf, shim the rollers, and make sure the gate actually closes on its own without dragging. Show me the gate closing on its own and I’ll show you where it’s failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wellington
We work on nine major gate brands, including LiftMaster, Linear, and DoorKing. Wellington has a lot of heavy-duty estate operators, especially on the slide gates built for horse trailers. We keep common boards, remotes, and safety edges in local stock for Wellington customers. If we don’t have the part on the truck, we can usually source it within a day, not a week. If you’ve got an aging FAAC or Viking operator and a second company told you to replace it, bring us the written estimate. We’ll give you a free second opinion before you spend the money.
Common Gate Repair Problems We See in Wellington Homes
- Surge-fried control boards. Summer lightning is the leading cause of gate operator failure in Wellington. A single strike can take out the board on a LiftMaster or Linear operator, and the gate won’t budge until it’s replaced. We typically install surge protection at the same time so you’re not replacing the same board next August.
- Sagging custom gates from shifting hinge posts. Wellington’s sandy, fast-draining soil shifts. On a 20-foot ornamental gate, a quarter-inch of post movement becomes a two-inch drop at the latch. The gate strains the operator, the operator burns out, and the whole thing quits. We fix the post first, then the leaf.
- Rust and binding on bottom rollers. Flat lots and heavy rain mean standing water in slide gate tracks. Rust forms on bottom rollers, the gate starts to drag, and eventually the motor overheats. We see this a lot in the low-drainage areas of Wellington, especially after September storms.
- High-cycle failures during WEF season. From January through April, estate gates that normally cycle 10 times a day can hit 50 or more, with horse trailers, vendor trucks, and transport vans coming and going. That’s when worn springs, tired weld joints, and aging operators fail all at once. Q1 is our busiest season in Wellington for a reason.
Pricing for Gate Repair in Wellington, FL
A typical electric gate repair in Wellington runs $180 to $520, depending on the part. Control board replacement on a LiftMaster or Linear operator is usually $240 to $490. Hinge and post repair runs $250 to $600, with welding jobs on ornamental estate gates typically landing between $350 and $850 depending on how much steel needs rebuilding. Weld and rust repair on a custom gate in Wellington runs $200 to $900, with most jobs falling in the middle of that range. Our pricing is quoted and agreed before any work starts, in writing. No trip charge inside the county. And we take $40 off any repair over $200, which helps cover the part nobody planned on buying this month.
We Also Serve Cities Near Wellington
Our Gate Repair team covers Wellington and the surrounding communities: Wellington, Royal Palm Beach, Greenacres City, Lake Worth, and Lake Worth Corridor. If you’re just outside the village limits, give us a call anyway. We likely have a truck nearby.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Wellington
Cycle count drives wear, and the Winter Equestrian Festival drives cycle count through the roof. A gate that normally opens 10 times a day can cycle 50 times or more from January through April, with horse trailers, transport vans, and vendor trucks constantly coming and going. That’s when tired hinge pins, worn rollers, and weak weld joints finally let go, all in the same quarter. If you know your gate is running heavy during WEF season, call (877) 610-2993 and we’ll inspect it before it quits on tournament Saturday.
Lightning strikes and the surges that follow fry control boards. That’s the single most common repair we make between June and September on LiftMaster and Linear operators throughout Wellington. The board dies, the gate stops responding to the remote or keypad, and the motor sits there doing nothing. We replace the board and add surge protection so the same storm doesn’t bill you twice.
Straightening the leaf without fixing the post is half a repair. The gate sags because the hinge post has shifted or the hinge tabs have worn, not because the steel bent on its own. We fix the post, weld the hinge tabs if they’re cracked, and then realign the leaf. Anything less and you’ll be calling again in six months. Call (877) 610-2993 for a free estimate and we’ll tell you honestly what’s moving.
Many do, especially in communities like Olympia, Versailles, and Buena Vida where the gate is shared infrastructure. Boards typically need a written estimate, proof of insurance, and sometimes a vendor application before work can proceed on community entry gates. We’re used to that process and can provide the paperwork the board requests. For individual estate gates on private property, it’s usually just you and us.
Water pools in the track channel on flat Wellington lots, and when it doesn’t drain, bottom rollers sit in standing water. They rust, the gate starts dragging, and the motor works harder every cycle until it overheats. The fix is usually cleaning and realigning the track, replacing the rollers, and improving drainage so the water stops standing there in the first place. Call (877) 610-2993 and we’ll take a look.
Keep Your Wellington Gate Running Through Trailer Season and Lightning Season
We recently rebuilt a 24-foot slide gate on an equestrian estate in the 33414 preserve area after a summer surge fried the LiftMaster operator’s control board. Our crew replaced the board, installed a surge protector, and corrected sag at the hinge post so the gate now cycles silently for the daily horse trailer traffic. That’s the Wellington work we do week in and week out.
If your gate is misbehaving, making noise, or not moving at all, call (877) 610-2993. Hal answers the phone, and he’ll tell you straight what it’s going to take. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wellington since 2001.