Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Sharon
Gate repair in Sharon, MA typically runs $225-$480 for most hinge, post, and alignment work, and we can usually have someone at your driveway within 24 hours. If you’ve got a gate that won’t close, sags into the latch, or groans every time the opener cycles, call us at (877) 610-2993 and you’ll get a live person, not a phone tree. We’ve been fixing gates here since 2001, and we know exactly what Sharon’s wet, salty, freeze-thaw climate does to iron and steel.
Sharon isn’t like Canton or Foxborough when it comes to gate wear. The combination of Lake Massapoag’s humidity, heavy road salt off Massapoag Avenue, and the town’s wetland corridors means hinges rust out and posts shift in ways that surprise homeowners. Hal Gatewood built this business on showing up, diagnosing what’s actually failing, and fixing it on site instead of selling you a new gate. That’s the whole job.
Key Takeaways:
- Live phone answer around the clock: (877) 610-2993
- 90-Day Done Right Promise in writing on every repair
- On-site welding and repair-first approach, not part-swapping
- Free estimates, no trip charge inside the county
- We service LiftMaster, FAAC, BFT, Linear, Viking, and more
Why Gatewood Fence & Gate Is Sharon’s Preferred Gate Repair Company
Gatewood Fence & Gate has been locally owned and owner-operated since 2001. Hal Gatewood’s name is on the shop, his address is published, and his license number is there for anyone to look up. That matters in Sharon, where a lot of homeowners have been through the wringer with companies that quote one price on the phone and present a different invoice at the door. That doesn’t happen here. The price is quoted and agreed before any work starts, and every job carries our 90-Day Done Right Promise. If it’s not done right, one call brings Hal back. No runaround.
Our Gate Repair team has worked Sharon driveways for years, from the large-lot colonials off Bay Road to the split-levels near Massapoag Avenue. We know which gate styles were common in Sharon’s 1960s through 1990s housing stock, and we know what happens to them after twenty New England winters. When you call, the person on the other end can tell you what to check before we even roll the truck. When we show up, you’ll see a uniformed, background-checked tech who introduces themselves by name. Often it’s Hal himself.
Our customers in Sharon appreciate that we don’t push replacements. A sagging gate usually means a failing hinge post, not a failed gate. Fix the panel without the post and you’ll fix it twice. Hal would rather weld a cracked joint in your driveway than haul the gate to some shop and hand you a bill for new steel. That’s the difference between a company that repairs gates and a company that sells them.
Our Gate Repair Services in Sharon
Electric Gate Repair
Sharon’s demand for automated driveway gates has grown steadily, and with it, the number of electric gate systems that quit at the worst possible moment. When an opener stops responding, the problem is usually one of three things: a failed control board, a bad limit switch, or a power issue at the operator. We carry parts for all nine major brands we service, including LiftMaster, FAAC, and BFT, which means we can often fix the problem on the first visit instead of ordering a part and leaving you with a dead gate.
A gate that won’t close after a power outage is almost always a limit-setting loss or a photocell misalignment. We can walk you through the safe manual-release procedure over the phone and then come out to reset the operator properly. The manual release cord is there for exactly this reason, and it’s safe to use, but don’t reach around the gate to force the arm back into place while the operator is still powered on. Call us instead at (877) 610-2993.
Automatic Gate Repair
Automatic swing gates in Sharon take a beating from freeze-thaw cycles. The town logs 10-15 significant freeze-thaw events per winter, and when saturated soil freezes, it expands and shoves gate posts out of square. That throws the photocells out of alignment, which trips the entrapment sensors, which makes the operator refuse to close. We see this constantly on properties near Sharon’s wetlands and conservation land. The fix starts with the post, not the operator. Get the post plumb again, and the sensors line back up.
We also repair slide gates, which are less common in Sharon but show up on some of the larger lots and newer builds. Slide gate failures usually involve roller bearings grinding on shifted track, or a motor working too hard against a gate that’s dragging on debris. We clean out the track, inspect the rollers, and adjust the motor’s force settings so the gate isn’t fighting itself.
Hinge & Post Repair
This is the bread and butter of gate repair in Sharon, and it’s where our on-site welding really matters. A hinge post that’s rusted through at the base, or shifted out of plumb from frost heave, can’t be fixed by bolting on new hardware. The post itself has to be dug out, replaced or reinforced, and set in concrete deep enough to get below the frost line. Hal has been welding on site since 2001, which means the repair happens in your driveway with the gate still attached to the other post, not hauled off to a shop for a week.
Off Massapoag Avenue, our tech found a swing gate hinge post so corroded from lake moisture and road salt that the sag correction required replacing the entire post footing and upgrading to galvanized hardware before reinstalling the LiftMaster operator and loop detector. That’s the kind of problem you can’t see until you dig into it, and it’s exactly why we quote after we look at the post, not before we’ve ever seen it. A post that’s sinking into saturated ground after heavy rain is usually a footing failure. Whether you need a full new post depends on how far gone the steel is. We’ll tell you honestly, and if it can be saved, we’ll save it.
Gate Realignment
Sharon’s freeze-thaw cycles are the biggest driver of gate misalignment in Norfolk County. A gate that scrapes the ground in March was probably fine in October. The post moved. Realigning the gate means resetting the post, not just cranking on the hinge bolts and hoping it holds. We check plumb in two directions, set the post with proper concrete depth, and only then rehang the gate and recalibrate the operator’s travel limits.
If your gate is visibly sagging toward the latch side, or the gap at the top hinge has widened, that’s a post issue, not a panel issue. A gate sags in the hinge post, not in the middle, and that is where we start. We’ll also inspect the hinges themselves for wear and replace them with galvanized or stainless hardware when the original parts are rusted through, which happens faster near Lake Massapoag than anywhere else in town.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sharon
We service nine major gate brands, and for Sharon customers we keep common replacement parts for LiftMaster, FAAC, BFT, Linear, and Viking on the truck. That matters when your gate is stuck closed and you need to get the kids to school. Board failures, dead capacitors, and worn limit switches on these brands are all repairable, and our techs are certified to work on all nine lines. If you have a Ghost Controls or Mighty Mule opener, we service those too. No “sorry, we don’t work on that brand” calls here.
Common Gate Repair Problems We See in Sharon Homes
- Rusted-through hinges near Lake Massapoag. The lake’s evaporative moisture, plus road salt blown in off Massapoag Avenue, creates a corrosive microclimate. Hinges that should last 20 years are failing in five or six. We upgrade to galvanized or stainless hardware as standard in this area.
- Heaved posts after winter freeze-thaw cycles. Sharon typically logs 10-15 significant freeze-thaw events per winter. Posts set in sandy or loamy soil shift, especially near wetlands where saturated ground expands dramatically when it freezes. Spring is when most homeowners notice the gate dragging.
- Photocell faults on automatic gates. When posts shift, the safety sensors lose alignment and the opener trips out. The gate will open but refuse to close, or reverse midway through the cycle. This is a post problem first, a sensor adjustment second.
- Wind damage on solid infill gates. Sharon gets steady winter wind off open conservation land, and solid-panel gates catch that wind like a sail. Footings that were marginal when installed fail under repeated wind load, and the gate starts leaning or binding against the latch post.
Pricing for Gate Repair in Sharon, MA
Gate repair pricing in Sharon runs on a spectrum depending on what’s actually failed. A hinge replacement on a standard ornamental iron gate typically runs $225-$375. Post resetting and realignment runs $350-$650 depending on whether we’re digging a new footing and pouring concrete. Electric opener repairs usually fall between $280-$480 for control boards, limit switches, and capacitor replacements. Full operator replacement is more, and we walk you through every number before we do anything. The price you’re quoted is the price you pay, before any work starts. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Sharon
Gatewood Fence & Gate provides Gate Repair in Sharon and the surrounding towns in Norfolk County. If you’re in Stoughton, Canton, Foxborough, or Walpole, the same crew covers your driveway. Schedules are coordinated from our Boston office, and we serve Sharon as a local stop on regular routes. Call (877) 610-2993 and we’ll get you on the board.
Serving Sharon, MA - Our Local Coverage Area
We’re based in the Sharon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Sharon
Sharon’s combination of wetland saturation, Lake Massapoag’s evaporative moisture, and heavy road-salt use on hilly winter roads creates a town-wide corrosion environment that accelerates rust on iron and steel gates. Homes within half a mile of the lake or any mapped wetland see the worst of it, but the salt spray off Massapoag Avenue and the main through-roads affects gates all over town. Wrought-iron hinges that should last two decades can rust through in five or six years in this area. The fix is upgrading to galvanized or stainless hardware and keeping a protective coating maintained. Call (877) 610-2993 if your hinges are showing rust bloom, and we’ll tell you if it’s surface or structural.
Most automatic swing gates in Sharon should be checked every two years at minimum, and annually if the gate is near wetlands or on sandy soil. The town’s 10-15 freeze-thaw events per winter heave posts incrementally, and by the third or fourth winter, the gate is visibly out of square. If you notice the gate dragging in spring, if the opener trips out intermittently, or if the gap at the hinges widens in one corner, it’s time. Caught early, a realignment is a few hundred dollars. Caught late, it’s a post replacement. Call (877) 610-2993 and we’ll put eyes on it. Estimates are free.
Yes. Most post-outage failures are a lost limit setting or a photocell that’s out of alignment from a shifted post. We reset the limits, realign the sensors, and test the entrapment protection before we leave. If the outage fried the control board, we carry replacements for LiftMaster, FAAC, BFT, Linear, and Viking on the truck. During a power cut, you can use the manual release cord to open or close the gate by hand, but never force the operator arm back into position while power is still connected. Call (877) 610-2993 and we’ll walk you through the release before scheduling the repair.
Not necessarily. A post that’s sinking is usually a footing problem, not a post problem. If the steel is still sound, we can dig out around the existing post, reset it plumb, and pour a proper concrete footing below the frost line. If the post itself is rusted through at ground level, or if the base has rotted out from water pooling around it, then yes, a new post is needed. We’ll show you what we find before we do anything. The price is agreed before work starts. Call (877) 610-2993 for a free look.
Solar gate openers struggle in Sharon winters. Short daylight hours, frequent overcast days, and snow cover on the panels reduce output enough that solar systems routinely fail on the coldest days, when the gate needs the most power. If your gate is near trees or on the north side of a hill, it’s worse. Most Sharon homeowners are better served by a hardwired operator with a battery backup. If you already have a solar opener and it’s failing each winter, we can convert the system to line voltage or add a larger battery bank. Call (877) 610-2993 and we’ll assess your site honestly.
Contact Gatewood Fence & Gate in Sharon
If your gate is sagging, stuck, groaning, or dead at the post, call Hal at (877) 610-2993. You’ll get a live person, a straight answer, and a free estimate. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sharon since 2001.