Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Aurora, CO
Gate repair in Aurora typically runs $180-$340 for hinge and weld work, while a full underground operator replacement on a subdivision gate lands between $3,200 and $5,400 depending on the brand and whether we’re pulling an obsolete Linear or FAAC unit. Most repairs we handle same-day or next-day, and every job carries the 90-Day Done Right Promise in writing. If your gate is sagging, grinding, or refusing to budge, call (877) 610-2993 and a live person answers. Not a voicemail.
Why Aurora Homes Are Different
Aurora is one of the most affluent planned-community suburbs in the Cleveland-Akron corridor, with a high concentration of upscale residential subdivisions developed throughout the 1980s-2000s. Many feature ornamental iron swing gates and automated community entry gates that are now 20-40 years old and entering a major failure window. This density of aging estate-style and HOA-managed automated gates, combined with northeast Ohio’s brutal freeze-thaw cycles, makes Aurora’s gate repair market uniquely driven by operator replacements and structural corrosion on high-end iron installations.
The housing stock here is dominated by large single-family homes and luxury subdivisions, brick colonials and custom builds on wooded lots, where private driveway gates and community entrance gates with underground or above-ground operators are far more common than in neighboring Portage County towns. Many of these installations used ornamental wrought or tubular iron that reacts poorly to decades of road salt blown in from plowed subdivision streets. Add in the heavy clay soils that heave post footings after a wet spell or deep freeze, and you get gates that drift out of square a little more every season.
Aurora sits in the northeast Ohio snow belt east of Cleveland, where lake-effect accumulation regularly exceeds 80-100 inches per season. The repeated freeze-thaw cycling heaves gate posts set in concrete, cracks weld joints on iron panels, and seizes or floods underground linear actuators. Late winter and early spring are peak season for structural gate failures here. Many of Aurora’s gated subdivision entrances were built out during the 1990s real estate boom and use early-generation FAAC or Linear underground actuator systems that are now obsolete. Parts are scarce, so we frequently find ourselves quoting full operator replacements rather than repairs, especially after a hard winter heaves the actuator vault.
Gate Repair in Aurora
Gate repair in Aurora is different from other markets because the failures are structural as often as they are electrical. We see post heave from freeze-thaw cycles, weld cracks where road salt has eaten ornamental iron for decades, and underground operators that have simply aged past the point of honest repair. We fix the gate in your driveway rather than hauling it off or swapping parts that don’t need swapping. Gate Repair is what we built this company on, and it’s still the bulk of what we do in Aurora.
Hinge and Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Aurora’s expansive clay soils heave every winter when lake-effect moisture and snowmelt sink into the ground. Concrete footings crack. Posts lose plumb. We cut out the old hinge post, re-bed it with deeper footing, and re-hang the panel so the gap stays even and the latch catches clean. Hinge re-bedding or single-post replacement in Aurora runs $320-$680, and this repair most often saves an ornamental iron gate from being needlessly replaced.
Weld Repair and Realignment
Sagging gates drag on the driveway or bind on the lock. The fix isn’t always a new panel. We weld on site, re-square the frame, repair cracked joints, and adjust the hinge spacing so the gate swings true. In Aurora neighborhoods where road salt gets plowed against gate posts all winter, the bottom hinge takes the worst of it. We sand, neutralize, weld, and re-coat so the rust doesn’t return in a year. Weld repair on ornamental iron runs $180-$340 for a cracked joint or small section, and full gate realignment with re-hang and adjustment runs $260-$520.
Underground Operator Replacement
The 1990s-era subdivisions in Aurora were built with FAAC and Linear underground actuators that are now obsolete. After enough freeze-thaw cycles crack the vault and seize the worm gear, repair parts simply don’t exist anymore. We quote honestly: a full underground operator replacement, including new loop detector and safety edge, runs $3,200-$5,400 installed. We’ll show you the failed actuator if you want to see it, and we’ll configure a new LiftMaster or comparable above-ground or in-vault unit that fits your existing panel.
Why are so many Aurora subdivision gates failing right now, even though they worked fine last fall?
Most of Aurora’s gated subdivisions were built during the 1990s and early 2000s using FAAC and Linear underground operators that are now past their service life. Freeze-thaw cycles push moisture into the vaults and shorten those unit lifespans even further. If your gate worked in October and failed in March, the actuator has likely seized or the board has corroded from snowmelt infiltration. Call (877) 610-2993 and we’ll diagnose it honestly.
My ornamental iron gate is sagging and dragging on the driveway - do I need to replace the whole panel?
Usually not. Sagging means the hinge post has moved, and the fix is to re-bed or replace that post, then re-hang the panel. We weld cracked joints on site and re-coat the repaired area. A new panel costs two to three times what a proper post repair and realignment costs, and most ornamental iron panels we see in Aurora have decades of life left in them. Call (877) 610-2993 for a free estimate.
Gate Installation in Aurora
Gate installation in Aurora typically runs $3,800-$11,500 for a standard driveway swing gate with automation, and most Aurora HOAs require architectural approval before the first post hole is dug. We’ve been installing and repairing gates here long enough to know that the approval process and the freeze-thaw cycle both start before the gate does. If you’re in Aurora and need a gate that survives lake-effect winters and passes HOA review, Gate Installation is something we handle from spec to final walkthrough.
Driveway and Swing Gate Installation
A driveway gate in Aurora usually means a steel or ornamental iron swing gate, often with an automated opener. We build for the conditions here: deeper footings to resist heaving, powder coating that holds up to road salt, and hinges sized for the weight of a solid iron panel. A single driveway swing gate with automation runs $3,800-$7,500, and a double swing gate or security gate with full automation and access control runs $6,000-$14,000.
Sliding and Community Gate Installation
Sliding gates are common at Aurora’s community entrances where a swing gate would block the street or a resident’s view. We install cantilever and track-style sliding gates, including the underground or above-ground operator systems that move them. Sliding gates in Aurora take a beating from plowed snow and road salt, so we pay extra attention to the gate’s rollers, the track bed, and the drainage around the operator vault. Sliding gates at community entrances start around $8,000 and climb depending on operator type and access control needs.
Pedestrian and Custom Gate Installation
Pedestrian gates in Aurora show up at pool enclosures, HOA walking paths, and private backyard entries. These take less strain than driveway gates but still get hammered by northeast Ohio winters. We install and weld pedestrian gates with the same care as a full driveway system, and we make sure the latch and hinge hardware is rated for freeze-thaw cycles, not a California garage door catalog. A typical pedestrian gate installation runs $1,200-$3,500.
Do I need architectural approval from my Aurora HOA before installing a new driveway swing gate?
Yes, in most Aurora subdivisions with an HOA, you need architectural or design review approval before installing any gate visible from the street. We provide dimensioned drawings, finish samples, and a written installation spec your board or management company can review. Call (877) 610-2993 and we’ll help you get the approval package together before any work starts.
How do freeze-thaw cycles in Aurora affect a newly installed gate post footing?
In Aurora, freeze-thaw cycles will heave a gate post that isn’t set below frost line, which means the gate sags, binds, or stops closing. We set posts deeper than standard guides recommend and use concrete with proper drainage so water doesn’t sit against the post and expand when it freezes. This is the single biggest reason gates fail in northeast Ohio, and it’s cheap to prevent and expensive to ignore. Call (877) 610-2993 for a free measure and written quote.
Gate Motor & Opener in Aurora
A gate motor or opener in Aurora typically costs $950 to $2,400 for a residential swing or slide setup, with full underground actuator replacements running $2,800 to $4,500. Most single-operator repairs in Aurora are done same-day or next-day, and we quote the price before any work begins. If your gate is stuck mid-swing at 7 a.m. on a snowy morning, Gate Motor & Opener service is what you need, and a live person answers when you call.
Residential Motor Installation
A new gate motor installation in Aurora runs from $1,400 to $3,800 depending on whether it’s a swing or slide gate, above-ground or underground operator, and whether conduit and power are already in place. In the 1990s-era subdivisions, the original conduit was often poorly sealed or too small, so a new installation frequently means trenching new conduit and pulling fresh wire. We do it right the first time, because re-cutting a slab or re-trenching a frozen gravel driveway in February is nobody’s idea of a good time.
Linear Actuator Replacement
Linear actuators, especially the underground swing-gate type, are the single most common failure we see in Aurora. The 1990s subdivisions were built with FAAC and Linear underground systems that are now obsolete. A linear motor replacement in Aurora runs $2,800-$4,500 installed, and after a hard winter that heaves the actuator vault, that’s often the only honest answer. We’ll show you the bad actuator, explain the replacement options, and quote a full number before any work starts.
Motor Repair and Battery Backup
Motor repair in Aurora typically runs $225-$650 for control board replacements, limit switch adjustments, capacitor swaps, and gear replacements. The honest truth is that a motor repair only makes sense when the operator itself is still in good shape. When an early FAAC or Linear underground unit from the 90s fails, the repair parts often aren’t made anymore, and we’ll tell you that openly. Battery backup for an Aurora gate operator runs $300-$900 installed, and we strongly recommend it on every installation so a February ice storm doesn’t strand you or your HOA.
Why do so many Aurora gate operators need full replacement instead of repair?
Most of Aurora’s gated subdivisions were built during a specific boom window, roughly the 1980s through the early 2000s, and the original operators were early-generation FAAC and Linear underground actuators. Those units are now obsolete, and the manufacturer no longer makes the repair parts. After enough freeze-thaw cycles have cracked the vault and seized the actuator, a repair isn’t possible because the parts don’t exist. We’ll always tell you if a repair is viable before quoting replacement. Call (877) 610-2993 for a diagnosis.
Can you add automation to my existing manual gate in Aurora?
Yes, we add automation to manual gates in Aurora regularly, especially on the ornamental iron swing gates that were installed during the original build without operators. The job requires an operator, receiver, safety edges, and a power run, which often means trenching conduit across the driveway. In Aurora’s clay-heavy, freeze-thaw soil, the conduit and post footings have to be done right or you’ll be fixing heave damage in two years. Call (877) 610-2993 for a free estimate.
Gate Access Control in Aurora
Gate access control in Aurora usually means one of two things: a keypad or phone entry system that stopped talking to the gate, or an operator so old the parts are gone. We handle both. Hal Gatewood has been fixing gates since 2001, and we answer the phone 24/7 with a live person, not a queue. If your Aurora gate won’t open from the keypad, the remote stopped working, or the phone entry just went silent after the last snowmelt, Gate Access Control is the service you need.
Keypad and Remote Entry
Keypad entry is the workhorse of Aurora subdivisions. Most of the keypads we service in this city are hardwired or wireless units tied to older swing gate operators. The most common failure isn’t the keypad itself; it’s the underground gel-filled splice kit wicking moisture up into the cable run after lake-effect snowmelt. We test the keypad in place before we touch the operator. Then we test the wire. Fix the splice first, and a lot of Aurora keypad problems disappear. Keypad and remote fixes land in the $150-$350 range.
Phone Entry and Card Reader Systems
Phone entry systems in Aurora’s gated communities are mostly 1990s-era units that have outlived their support. Dial-tone loss, garbled audio, or no ringing at the house usually traces to moisture in the underground splice points or a control board that’s been baked and frozen for 30 years. Card readers fail when road salt thrown up from plowed subdivision streets coats the contact points and the internal board corrodes. Phone entry and card reader repairs run $350-$700, and we only use readers rated for outdoor exposure.
Video Intercom and Full Retrofits
Video intercoms are the upgrade a lot of Aurora homeowners and HOAs are making when the old phone entry dies. We install modern video intercom units that let you see who’s at the gate from a phone app, and we can integrate them with your existing swing gate operator even if it’s a legacy FAAC or Linear. A full operator retrofit on a 1990s underground FAAC or Linear swing gate usually lands between $2,500 and $5,000, including the new operator, post footing work, safety photocells, and reprogramming.
Why do Aurora’s underground swing gate operators fail right after snowmelt?
Aurora’s underground swing gate operators fail after snowmelt because the freeze-thaw cycle heaves the concrete vault upward, flooding the actuator chamber and frying the control board. Lake-effect snowmelt refreezes at night, and the repeated expansion lifts vaults and snaps hinge post welds. When the board gets wet, it either dies immediately or corrodes slowly enough to fail a month later. Call (877) 610-2993 and we’ll get you a straight answer and a written quote.
Can you retrofit a 1990s Linear swing gate to work with a modern video intercom?
Yes, in most cases you can retrofit a 1990s Linear swing gate to work with a modern video intercom, but it depends on whether the existing operator is worth keeping. If the Linear operator is still functioning and the vault hasn’t heaved, we can add a new access controller and video intercom on the gate post and tie it into the existing operator’s input terminals. If the operator is already failing, we’ll quote the full replacement so you’re not paying twice. Call (877) 610-2993 for an exact assessment.
Gate Parts & Welding in Aurora
Gate parts and welding in Aurora usually comes down to one question: can the existing iron be saved, or is it time to replace the section that failed? In most Aurora subdivisions, the answer is save it. We weld on site, in your driveway, so the gate never leaves your property. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and the name on the shop is the same name on every invoice. If your swing gate is dragging, cracked, or rusted through at the hinge, Gate Parts & Welding is how we fix it without selling you a whole new gate.
Hinge and Post Replacement
Hinge replacement in Aurora typically runs $180-$390 per hinge depending on the gate weight, the existing weld condition, and whether the post has moved. We remove the old hinge, grind the post clean, weld new heavy-duty hinges in place, and rehang the panel so it swings full travel without dragging. If the post itself has heaved out of plumb, no hinge will fix the sag. We’ll tell you that before we sell you hinges. Post replacement runs $600-$1,400 depending on depth and whether the operator is mounted to that post.
Rail Repair and Custom Welding
Rail repair in Aurora usually means cutting out a rusted or cracked section of ornamental iron rail and splicing in new material. Road salt from plowed subdivision streets settles into the weld joints and eats them from the inside. We grind back to clean metal, weld the splice, and match the finish so the repair does not look like a patch job. Rail repair runs $150-$450 per section. Custom welding covers brackets, reinforced posts, custom hinge plates, and operator mounts, running $90-$120 an hour plus material, with most jobs landing between $250 and $700 total.
Why do gate post footings fail so often in Aurora’s newer subdivisions, and can welding alone fix a leaning hinge post?
The footing fails because northeast Ohio freeze-thaw cycles expand and contract the soil around the concrete, slowly heaving the post out of plumb. Welding alone cannot fix a leaning hinge post. You have to dig out the old footing, reset the post deeper, and pour new concrete before you rehang the gate panel. If you weld the hinge without resetting the post, the same problem comes back next spring. Call (877) 610-2993 and we’ll diagnose it properly.
After a hard Aurora winter, our wrought iron swing gate is dragging on one corner. Is that a weld issue or a post issue?
It’s usually both. The post has heaved out of plumb just enough that the hinges are no longer in line, and the weld joints at the hinge have stretched or cracked under the extra load. We reset the post first, then cut out the old weld, grind the metal clean, and weld new hinges in. Call (877) 610-2993 and we’ll come out to diagnose it. Free estimate, no trip charge inside the county.
Brands We Service in Aurora
We carry parts and stock components for nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Aurora’s older subdivisions, we keep common Linear and DoorKing control boards, limit switches, and receiver modules on the truck so most repairs don’t wait on shipping. If we don’t have it, our Denver office coordinates same-day or next-morning parts runs. See all brands we service.
Pricing for Gate Repair in Aurora, CO
| Service | Typical Range in Aurora |
|---|---|
| Hinge re-bedding or single-post replacement | $320-$680 |
| Weld repair on ornamental iron (cracked joint, small section) | $180-$340 |
| Full gate realignment with re-hang and adjustment | $260-$520 |
| Underground operator replacement (installed) | $3,200-$5,400 |
| Board or limit switch repair | $190-$410 |
| Single driveway swing gate with automation | $3,800-$7,500 |
| Double swing or security gate with automation | $6,000-$14,000 |
| Sliding gate at community entrance | Starting around $8,000 |
| Pedestrian gate installation | $1,200-$3,500 |
| Residential swing gate motor installation | $1,400-$3,800 |
| Linear actuator replacement (underground) | $2,800-$4,500 |
| Motor repair (control board, gear, capacitor) | $225-$650 |
What pushes price up in Aurora: deeper footings to beat freeze-thaw heave, obsolete operator retrofits that require new conduit and safety edges, and ornamental iron fabrication to match existing estate-grade gates. The price on the estimate is the price on the invoice. No surprises at the door, no upsell when we arrive. We offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve gotten from another company. Veterans and seniors get a permanent 10% discount.
Neighborhoods We Serve in Aurora
We’re all over Aurora. If you’re near Southlands, we can usually get to you fast. If you’re up toward Fitzsimons or out by the E-470 corridor, you’re still in our regular service area. Typical response time for most of Aurora is same day or next morning for repairs. Scheduling and dispatch are coordinated from our Denver office, and crews serve Aurora locally.
- Saddle Rock
- Meadow Hills
- Mission Viejo
- Willow Trace
- Tallyn’s Reach
Service Area - Cities Near Aurora
We serve Aurora directly and regularly travel to surrounding communities including Cherry Creek, Glendale, Castlewood, Centennial, and Commerce City. If you’re in Aurora, CO or any of these nearby cities, the same live-answer phone, same upfront pricing, and same 90-Day Done Right Promise apply. No trip charge inside the county.
Serving Aurora, CO - Our Local Coverage Area
Gatewood Fence & Gate crews serve Aurora and the communities around it; dispatch is coordinated from our Denver office. The map shows the Aurora coverage area; if your address is on it, we can help.
Also serving nearby: Aurora, CO, Cherry Creek, CO, Glendale, CO, Castlewood, CO, Centennial, CO, Commerce City, CO.
FAQs About Gate Repair in Aurora
Most days, yes. For urgent repairs, a gate stuck open or a motor that won’t run, we aim for same-day or next-morning response anywhere in Aurora. Calls are answered live 24/7, and we’ll give you a real arrival window, not a four-hour guessing game. Call (877) 610-2993 and we’ll get you scheduled.
For repairs, usually not. For full operator replacements or any work that changes the gate’s appearance or safety systems, some Aurora HOAs require notification or approval. We provide written specs and drawings when needed, and we’ve worked directly with management companies for boards in Walden, Barrington, and Four Seasons. Call (877) 610-2993 and we’ll help you navigate it.
We cover 44202 and the full Aurora area. If you’re on the edge of town near the county line, call us and we’ll confirm you’re in our no-trip-charge zone. Dispatch is coordinated from our Denver office, but the crew that shows up knows Aurora’s soil, its salt load, and its 1990s-era gate stock. Call (877) 610-2993 to check your address.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aurora Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth