Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Bethany
Gate repair in Bethany usually costs between $160 and $640 depending on what’s failing. A simple hinge adjustment runs on the low end, while re-hanging a hillside swing gate with a new post runs higher. We get to Bethany fast, and a live person answers when you call (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and he doesn’t haul your gate to a shop an hour away. He fixes it in your driveway, where it belongs.
Bethany’s master-planned subdivisions all grew up around the same time, which means your gate is probably the same age as your neighbor’s. And it’s probably failing the same way. That’s not a coincidence. Builder-grade cedar gates installed in the late 1990s and early 2000s are hitting their 20 to 25 year mark all at once across 97229. We know exactly what those gates look like, how they were hung, and where the original builders cut corners. That knowledge saves you a second repair within the first rainy season.
If you need Gate Repair from someone who will show up on time and quote the price before any work starts, call us. The estimate is free, and nobody changes the number at the door.
Why Gatewood Fence & Gate Is Bethany’s Preferred Gate Repair Company
Bethany has HOAs everywhere. Architectural committees review everything, and they don’t like surprises. The person who shows up at your house needs to understand that a simple “upgrade” to steel framing might get rejected because the original builder spec called for cedar. That’s not a fight you want to have with your management company after the work is done. Hal has worked with enough Bethany HOAs to know the difference between a repair that matches the original and a change that needs a written request. We repair to match original specs, and we’ll tell you up front if your project needs committee approval before we touch anything.
We’re not a national outfit with a call center three states away. The name on the invoice is Hal Gatewood’s, the shop address is published, and the license number is public record. He answers the phone around the clock, not a voicemail tree. When a Bethany homeowner calls about a gate dragging on the driveway, Hal is the one who picks up. When the job needs welding, the welding happens on site. When it doesn’t hold, the 90-Day Done Right Promise brings him back, in writing, no runaround.
Our Gate Repair in Bethany customers routinely mention the same three things: the quote on the phone matched the invoice, the gate worked the day we left, and the guy who showed up was background-checked and knew exactly what he was looking at. That’s the standard. Not a marketing line.
Our Gate Repair Services in Bethany
Hinge & Post Repair
A sagging gate in Bethany almost always starts at the hinge post. Cedar posts sitting in ground that stays wet from October through June rot from the inside out. By the time the gate droops enough to scrape the driveway, the post is usually soft below grade. We don’t patch it with a strap and call it done. We dig it out, replace the post if it needs replacing, and reset the hinges in plumb. If HOA rules require cedar, we use cedar. If the committee allows a steel post reinforcement, we’ll say so and save you another rot cycle.

Gate Realignment
Bethany’s hillside lots cause a problem the original builders rarely solved correctly. A double swing gate on a slope gaps at the bottom or drags on the upslope side. That’s geometry, not luck. Re-hanging to account for the grade is a standard step in nearly every Bethany repair we do. Flat-lot neighborhoods in Portland don’t deal with this at the same rate. We re-set hinge posts, adjust the reveal, and get both leaves closing evenly. The gate should not drag, and it should not leave a gap big enough for a dog to squeeze through.

Electric Gate Repair
Automatic gates in Bethany fail for predictable reasons. Rain works into the control board, the safety photocell gets misaligned when the post shifts half an inch, or the operator burns itself out fighting a gate that was never balanced for the slope. We service LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and a handful of other majors. We don’t sell you an operator you don’t need. Hal fixes what’s broken, replaces what’s failed, and adjusts the rest so it doesn’t fail again in six months.

Lock Repair
HoA-governed communities in Bethany often have shared pedestrian gates and entry hardware. When a lock fails, it’s not just your gate; it’s the neighbor’s access too. We repair latch hardware, replace lock sets to match the builder finish, and coordinate with the management company when the work touches common property. We’ll also tell you if your lock is fine and the real problem is the gate sag pushing the strike plate out of alignment.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bethany
We’re certified on nine major gate brands, and for Bethany customers, we commonly stock parts for Viking and Ghost Controls operators, as well as DoorKing and Elite access systems. That means less waiting on a part to ship from a warehouse. If your automatic gate opener is acting up and the controller board is cooked, we can usually have it sorted without leaving you with a non-functional driveway gate for two weeks. We keep the common parts local so the repair window stays short.
Common Gate Repair Problems We See in Bethany Homes
- Builder-grade cedar gates all failing together. Whole streets in Bethany got the same 6-ft cedar privacy gate from the same volume builder. When one starts rotting at the post, the neighbors aren’t far behind. We see clusters of calls from the same subdivisions, and we already know the gate style, latch hardware, and HOA finish before we arrive.
- Hillside gates dragging on the grade. Sloped driveways mean swing gates either drag on the upslope leaf or gap dangerously. Original builders rarely re-hung the gate to match the grade after the driveway settled.
- Wet-season warping and screw pull. Bethany sits on the western flank of the West Hills, and it gets more rain than the Portland valley floor. Cedar slats swell every wet season, pull screws, and warp the frame out of plumb. Gates that looked fine in August show their problems by February.
- HOA finish requirements. You can’t always swap a rotted cedar gate for steel or aluminum, even if you want to. Most Bethany architectural guidelines restrict material changes. We repair to match the original spec and tell you when a request to the committee is actually worth writing.
Serving Bethany, OR - Our Local Coverage Area
We’re based in the Bethany area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Pricing for Gate Repair in Bethany, OR
In Bethany, a hinge or latch adjustment typically runs $160 to $280. Re-hanging a sagging gate with a reset hinge post runs $350 to $640, depending on whether the post needs replacement and how much slope the lot has. Electric gate board or safety sensor repair runs $220 to $480. Lock set replacement or repair runs $140 to $260. Full automatic operator replacement starts around $650 and goes up from there.
Every job gets a written quote before any work starts. The number we agree on is the number you pay. No trip charge inside the county, and we take $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. If another company already quoted you, bring us the written estimate and we’ll give you a free second opinion. Call (877) 610-2993.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bethany since 2001.





Before
After
Before
After
Before
After