Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Weatherford, TX
Gate repair in Weatherford typically costs $120-$400 for hinge and post work, $95-$275 for realignment, and $180-$650 for electric or automatic opener repairs. Most repair calls in the 76085, 76086, 76087, and 76088 ZIP codes are handled same-day or next-morning. Call (877) 610-2993 and you’ll reach a live person who can give you a straight price range before we ever head your way.
Weatherford isn’t a standard suburban market. Known as the Cutting Horse Capital of the World, this city sits at the Cross Timbers and Blackland Prairie transition zone, where working equestrian ranches and horse training facilities share the road with newer subdivisions on 1-5 acre lots. That means we’re fixing heavy-duty welded-pipe ranch gates and arena entrances one hour, then troubleshooting an ornamental automatic slide gate the next. The soil, the weather, and the gates themselves are different here, and the repair has to account for all three.
Why Weatherford Homes Are Different
Parker County’s expansive clay soils heave and contract through every wet-dry cycle, pulling gate posts out of plumb and cracking concrete footings that were adequate in Dallas but not here. On properties off Zion Hill Road, throughout the 76087 and 76088 ZIPs, and along Old Garner Road, we’ve watched posts lean a full season after they looked square. The I-20 tornado corridor delivers high winds and large hail that bend aluminum infill panels and damage operators mounted on exposed rural posts.
The housing stock splits sharply. Older working ranches carry pipe-and-post livestock gates, many of them DIY-welded or patched repeatedly over decades. Newer subdivisions off Tin Top Road and Bethel Road run to ornamental iron or steel automatic gates. Wide spans of 16-20 feet are standard to clear horse trailers and equipment, far more common than in typical DFW suburbs. That dual market doesn’t exist the same way in Fort Worth or Granbury, and it changes what “gate repair” means on every call.
Gate Repair in Weatherford
When a gate won’t open at 6 a.m. and the horse trailer’s loaded, or when it won’t latch on a windy night off Tin Top Road, you need someone who knows the difference between a racked ranch frame and a suburban operator fault. We repair both, and we do it in your driveway with a welder on the truck, not by hauling your gate to a shop three counties away. Gate Repair is what we’ve built this business on since 2001.
Hinge & Post Repair
A gate that drags on the latch side usually means the post has moved, not the panel. In Weatherford’s heavy clay, posts heave and lean through every rain cycle. We reset them in properly sized concrete footings, replace rusted barrel hinges with heavier stock, and re-hang the gate so it swings true. Most hinge and post repairs in Weatherford run $120 to $400, depending on how far the post has moved and whether we’re pouring new concrete. Fix the panel without the post and you’ll fix it twice.
Electric & Automatic Gate Repair
Electric gate systems around Weatherford take a beating from hail, high winds, and ice events. We trace the problem to the component that actually failed, not the first part we can bill. If your gate opens partway and stops, or won’t respond to the remote from inside the truck cab, we test the operator, receiver, safety edges, and wiring. Electric and automatic opener repairs run $180 to $650, with limit switches and safety edges at the lower end, circuit boards and motor gearboxes at the upper. We carry parts for Viking, Linear, and other major brands on the truck.
Gate Realignment & Weld Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. On ranch properties across the 76087 and 76088 ZIPs, we regularly find pipe frames that have been field-welded multiple times and are now racked two or three inches out of square. We cut out the amateur bead welds, re-fixture the frame, and re-hang it plumb. Gate realignment work in Weatherford typically falls in the $95 to $275 range, and weld and rust repair on steel and pipe gates lands between $85 and $350.
How fast can you get to a gate repair in Weatherford?
Same-day service is available across Weatherford on most repair calls, and almost all are wrapped up by the next morning. For a gate stuck open on 76087 ranch land, we understand the urgency: livestock and horses don’t wait. Call (877) 610-2993 and we’ll tell you exactly when the truck rolls.
Can you handle emergency gate repair in Weatherford at night?
A live person answers our phone 24 hours a day, 7 days a week. If your gate is stuck open with livestock in the pasture, or stuck closed with a trailer inside, we treat it as emergency work. The person who picks up can actually help, not just take a message. Call (877) 610-2993 any time.
Gate Installation in Weatherford
Gate installation in Weatherford usually means one of two jobs: a heavy ranch gate spanning 16 to 20 feet for a horse trailer, or an ornamental automatic gate on a 1 to 5 acre subdivision lot. Either way, the power and the span are what matter, and both get abused by Parker County’s expansive clay. We’ve been building and hanging gates here long enough to know that a post set without an oversized footing is a callback waiting to happen. Gate Installation starts with measuring your actual opening and soil conditions, not pulling a kit off a shelf.
Driveway & Swing Gate Installation
A driveway gate in Weatherford’s newer subdivisions is usually ornamental steel or iron, and it’s usually automatic. We spec the span, operator, safety photocells, and post footings together, because a gate that looks great but drags in six months isn’t a gate. For wide double swing gates on horse properties, we add center drop rods so the middle doesn’t sag. A typical single swing gate installation runs $1,800 to $4,500, and a 16 to 20 foot ranch gate with heavy steel frame and operator lands between $4,000 and $8,500.
Sliding Gate Installation
Sliding gates make sense when the driveway grade won’t allow a swing, or when you need a wide clear opening without a gate leaf taking up the yard. In the 76087 and 76088 ZIPs especially, we build slide gates on heavy track and carriage wheels sized for long spans and hard ranch use. A solar operator needs proper battery reserve spec’d for North Texas weather, not an Arizona sun chart. Automatic operators add $1,200 to $3,500 installed, and solar packages for rural no-power sites run $900 to $2,400.
Pedestrian Gate Installation
We build walk gates for people, whether that’s a matching pedestrian gate beside a new automatic driveway gate, or a separate entry at a horse facility. These are smaller jobs, but they need the same square frames and plumb posts as anything else. Pedestrian gates start around $600 to $1,800. Every quote is written, itemized, and agreed before any work starts, and the estimate is free.
How deep should a hinge post footing be for a wide ranch gate in Weatherford’s clay soil?
A hinge post for a 16 to 20 foot ranch gate on Parker County clay should be set in a concrete footing at least 3 feet deep, and often deeper on a slope or with a heavy gate. We oversize the footing diameter so the clay’s expansion and contraction doesn’t grip and shift the post. Call (877) 610-2993 and we’ll measure your exact situation.
Why does my double swing gate sag in the middle after just one season here?
The hinge posts are moving. The clay heaves and contracts, the posts go out of plumb, and the gate panels rack and drop. Welding another brace onto the middle doesn’t fix a leaning post. We re-set the posts in proper footings and re-hang the gate square, then add a center drop rod so both leaves support each other.
Gate Motor & Opener in Weatherford
When a gate motor quits on a ranch off Tin Top Road or a slide opener strips out on a driveway in Silverado, you need a straight answer and a quick fix. Most motor repairs in the 76085, 76086, 76087, and 76088 ZIP codes run between $180 and $450 depending on the failure, and we carry parts for Viking, DoorKing, and Elite operators on the truck so the first trip is usually the only trip. Gate Motor & Opener repair is where Hal’s fix-it-first mindset shows: we test before we replace, and we tell you if the real problem is a leaning post, not a dead motor.
Motor Repair & Replacement
Most repair calls in Weatherford are fixable same-day. We service all nine major brands, including DoorKing and Elite units common on newer subdivisions around White Settlement Road and FM 51. If a control board has failed, we test it in your driveway and replace only what’s actually dead. A basic motor repair like a bad capacitor or misaligned limit switch runs $180 to $280, and a full control board replacement typically lands between $320 and $450.
Linear & Slide Motor Service
Linear openers run into trouble on Weatherford properties with long, heavy gate spans, which we see a lot on acreage off Tin Top Road and throughout the 76087 ZIP. The arm takes the full weight and wind load, and when it wears, the gate struggles. We stock replacement linear arms and gear sets. Slide operators on ranch gates push 16 to 20 feet, and chain-drive units collect grit from gravel driveways while high winds bend chain guides. We weld broken chain mounts on site. Complete motor and arm replacement on a standard residential gate runs $800 to $1,400 installed, and heavy slide operators for ranch gates run $1,200 to $2,200.
How fast can you get to Weatherford for a gate motor repair?
Most Weatherford repair calls are reached same-day, and many are handled within a few hours depending on where you are in Parker County. The person who answers the phone can tell you exactly when to expect someone at your gate. Call (877) 610-2993 with your ZIP code and we’ll give you a real window.
Can you fix a gate motor on a working horse ranch in Weatherford?
Absolutely, and that’s a big share of what we do in the 76087 and 76088 areas. Ranch gates are heavier, often field-welded, and under daily use by livestock and trailers. We re-square frames, weld broken mounts on site, and install motors sized for the weight and span, not a residential unit that’ll burn out in a season.
Gate Access Control in Weatherford
Access control in Weatherford runs from simple keypad entry on a working ranch to full smartphone-integrated systems on a subdivision driveway. The difference is duty cycle and environment: a training facility gate cycles hundreds of times daily under dust and cattle pressure, while a residential gate sees a few cycles with delivery trucks and children to protect. We spec each system for its actual use, and we install exit loops, safety photocells, and entrapment protection as standard, not add-ons. Gate Access Control only works if the wiring and programming hold up to Parker County’s weather and the gate’s real-world abuse.
Keypads, Remotes & Phone Entry
We install and repair keypad systems, remote receivers, and cellular-based phone entry systems across all four Weatherford ZIP codes. On rural properties with no reliable cell service, we favor hardwired keypads and long-range remotes over systems that depend on cloud connectivity. Programming includes setting multiple user codes, time restrictions, and vacation holds so you don’t have to reissue codes every time a trainer leaves.
Exit Loops & Safety Devices
Every automatic gate in Weatherford needs a free-exit device so the gate opens when a vehicle approaches from inside the property. Without it, you’re keying in a code or hitting a remote every time you leave. We install exit loops, safety photocells, and edge sensors, and we test every device before we leave. Clay soil heave can shift loop placement over time, so we check loop integrity when we’re already on site for other work.
Do I need a loop detector if I only enter from the road?
Yes. You need a loop detector or another free-exit device so the gate opens automatically when a vehicle approaches from inside the property. Without it, you’ll be keying in a code or hitting a remote every time you leave. We install exit loops as part of every automatic gate system in Weatherford.
Can access control handle the dust and weather on a working ranch?
Yes, if the components are spec’d for it. We favor sealed keypads and heavy-duty receivers on ranch properties, and we mount electronics where livestock and equipment won’t knock them loose. The programming and wiring matter as much as the hardware: a system that fails every calving season isn’t worth the conduit it’s run in.
Gate Parts & Welding in Weatherford
Most gate failures in Weatherford start small: a hinge that’s worn egg-shaped, a weld that cracked at the post, a roller that seized up and started grinding the rail. Catch those early and the fix is quick. Ignore them and you’re looking at a gate that drags across the gravel, binds against the latch, or drops hard onto your truck’s tow hitch. We weld on site, in your driveway or at your fence line, so the repair matches the opening exactly. Gate Parts & Welding is how we fix what other companies want to replace.
Hinge & Rail Repair
Hinges take every pound the gate carries, plus every time the wind catches it. On Weatherford ranch gates, we commonly find barrel hinges ground down to a sliver where the gate swings over a low spot in the drive. We cut the old hinge off, weld a fresh one on, and set the gate level. Hinge replacement runs $95 to $220 per hinge. When a top rail breaks at the weld, the whole gate loses shape; we sleeve or replace it, re-weld straight, and brace it. Rail repair generally runs $110 to $260.
Post Replacement & Custom Welding
A sagging gate is usually a failing post. In Weatherford, expansive clay will push a post out of plumb within seasons if it wasn’t set deep enough. We dig out the old post, set a new one that matches the fence line, and re-hang the gate. Post replacement typically runs $280 to $550. Sometimes the right fix is building the part that was never manufactured for your gate. We weld custom brackets, striker plates, and frame reinforcements. Custom brackets run $65 to $180, and frame rebuilding starts around $250.
Can you weld the gate without taking it off the posts?
In most cases, yes. Hal welds in your driveway or at your fence line, with the gate laid out on blocking or propped squared-up, so the repair matches the opening exactly. Taking a gate to a shop and welding it on a flat table often produces a gate that’s square to the table but not square to your posts. Fixing it in place means it closes right the first time.
What does it cost to have a gate welded in Weatherford?
Most welded repairs, hinge replacements, and rail fixes in the Weatherford market land between $95 and $550, with small custom brackets starting around $65. The big variables are how much steel we’re replacing, whether a post has to be re-set in that Parker County clay, and how far off-square the gate has drifted. You’ll get an exact number before we start, and that number won’t move. Call (877) 610-2993 for a free estimate.
Brands We Service in Weatherford
We carry parts and provide authorized service for nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Weatherford customers, that means most repairs don’t wait on a parts order from Dallas. We stock common operator components, linear arms, and control boards locally, and we can source brand-specific items within a day when needed. See our brands for full details on each manufacturer’s systems.
Pricing for Gate Repair in Weatherford, TX
| Service | Typical range in Weatherford |
|---|---|
| Hinge & post repair | $120 - $400 |
| Gate realignment | $95 - $275 |
| Weld & rust repair (steel/pipe) | $85 - $350 |
| Electric/opener repair (basic) | $180 - $280 |
| Electric/opener repair (control board) | $320 - $450 |
| Electric/opener repair (full range) | $180 - $650 |
| Single swing gate installation | $1,800 - $4,500 |
| 16-20 ft ranch gate with operator | $4,000 - $8,500 |
| Pedestrian gate installation | $600 - $1,800 |
| Automatic operator (installed) | $1,200 - $3,500 |
| Solar operator package | $900 - $2,400 |
| Heavy slide operator (ranch) | $1,200 - $2,200 |
What pushes price up in Weatherford: deep post replacement in expansive clay, re-squaring field-welded ranch frames with multiple amateur welds, and sizing operators for 16-20 foot spans that suburban equipment can’t handle. The price we quote is the price you pay, agreed in writing before any work starts. Every repair over $200 carries $40 off, and seniors and veterans receive a permanent 10% discount.
Neighborhoods We Serve in Weatherford
We work all across Weatherford, from older ranches near Brock to newer subdivisions off Tin Top Road and Bethel Road. Typical response for a repair call inside Parker County is same-day or next-morning. No trip charge applies anywhere in the county.
- Brock / Peaster area
- Tin Top Road corridor
- Bethel Road subdivisions
- Old Garner Road area
- Adell / Harmony area
Service Area - Cities Near Weatherford
Our crews serve Weatherford, TX locally, with dispatch and scheduling coordinated from our Dallas-Fort Worth office. We also run regular routes to Azle, TX, White Settlement, TX, Eagle Mountain, TX, River Oaks, TX, and Briar, TX. No trip charge inside Parker County.
Serving Weatherford, TX - Our Local Coverage Area
Gatewood Fence & Gate crews serve Weatherford and the communities around it; dispatch is coordinated from our Dallas-Fort Worth office. The map shows the Weatherford coverage area; if your address is on it, we can help.
Also serving nearby: Weatherford, TX, Azle, TX, White Settlement, TX, Eagle Mountain, TX, River Oaks, TX, Briar, TX.
FAQs About Gate Repair in Weatherford
Yes. We run calls in 76085, 76086, 76087, and 76088 regularly, from the subdivisions off Tin Top to the working ranches south of I-20. There’s no trip charge inside Parker County. If you’re on the edge of town or down a long gravel drive, that doesn’t change the price.
You’ll find our rates are fair for the Parker County market, and we never add a trip charge inside the county, which some out-of-area companies do. Hinge and post work here often runs $120-$400 because of the clay soil and the heavier pipe gates. The geography and the gates themselves are different from the city.
Both, and that’s what makes Weatherford different from typical DFW markets. Working equestrian properties across the 76087 and 76088 ZIPs need heavy welded gates that stand up to trailer traffic, cattle pressure, and constant opening. We weld pipe gates on site, re-hang arena entrance gates, and fix the damage that happens when livestock decide the gate is in their way.
Call (877) 610-2993 for a free estimate on any gate repair, installation, motor service, access control, or welding job in Weatherford. A live person answers around the clock, and you’ll get an upfront price before we ever set foot on your property.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Weatherford Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond