Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Marco
Gate parts and welding in Marco, FL is a different job than it is even five miles east in Naples. The salt air here never stops working on steel, and a hinge that would last fifteen years inland can seize in a single wet season on this island. We have been cutting out old posts, welding new steel, and re-hanging heavy gates on Marco since we first started taking calls here, and nothing about this island surprises us anymore. If your gate is sagging, seized, or cracked, call (877) 610-2993 and talk to a live person who knows Marco.
Why Gatewood Fence & Gate Is Marco’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop, and he has been fixing gates since 2001. That matters on Marco, where a lot of homeowners have been burned by outfits that quote one price on the phone and hand over a different invoice at the door. We don’t work that way. The price we quote is the price you pay, agreed before any work starts, every time.
Marco customers call us because we weld on site. Your gate stays in your driveway. We don’t haul it to some shop across Alligator Alley and bring it back three weeks later. The person who shows up is background-checked and uniformed, and when Hal says the 90-Day Done Right Promise covers the work, it’s stamped in writing, not buried in fine print. One call brings him back, no runaround. Live people answer the phone around the clock, too, not some answering service in another state.
Our Gate Parts & Welding Services in Marco
Hinge Replacement
On Marco, hinge replacement is the repair we do more than any other. On a barrier island surrounded by the Gulf, bays, and tidal canals, salt-laden air drives galvanic corrosion where dissimilar metals meet. Put a plain steel hinge pin against an aluminum gate frame and it can seize within a single wet season. We see it constantly in the 1970s-era Deltona-built canal-front homes around Marco, where original ornamental gates are now pushing fifty years old. We cut out the old hardware and weld in stainless steel hinges that were chosen for this environment.
Post Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. On Marco, post failure is often made worse by storm surge and soft, sandy soil near the canals. A post that shifted during a June hurricane might not show itself until the concrete cracks around the base in September. We set new galvanized post footings, and if the post itself is salvageable, we tell you that and leave it alone. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Heavy ornamental gates put real stress on their top and bottom rails over decades, especially when hinges have been binding. On Marco, rust blooms form where the factory powder coat was breached, especially on canal-front properties with constant spray. We weld cracked rails solid again, then grind, prime, and paint so the repair blends with the original design. If you have a 1970s wrought-iron gate, we can fix a crack without ruining the look. That’s one of the reasons people in Marco call us instead of a company that wants to sell them a new gate.
Custom Welding
Marco has a lot of high-end properties with custom fabricated and ornamental gates, paired intercoms, camera entry, and underground operators. That level of work demands precision. A heavy bespoke gate that isn’t welded true will fight its operator every day until the motor burns out. We fabricate and weld new sections on site, match existing scrollwork, and make sure the finished repair runs silent. If a competitor’s weld failed, we’ll cut it out and do it right, then stand behind it with the 90-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marco
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Marco customers, that matters because we keep common parts on the truck so you aren’t waiting on a shipment while your gate hangs open. On our Gate Parts & Welding team, the person who answers the phone knows the difference between a BFT rack and a Viking arm, and can usually tell you over the phone whether what we’re seeing is worth a service call.
Common Gate Parts & Welding Problems We See in Marco Homes
- Seized hinge pins on Deltona-era ornamental gates. The canal-front homes built in the 1970s and early 1980s often still have their original wrought-iron or painted steel gates. Plain steel pins against aluminum frames seize in Marco’s salt air, sometimes within one summer.
- Failed operators after storm surge. Gate operators mounted on posts near the water get hit hard when storm surge rolls through between June and October. They short out, and homeowners often don’t discover it until they return in November.
- Rust blooms at welded joints. Where factory powder coat was scratched or breached during installation, the bare steel underneath reacts with Marco’s perpetual moisture and starts to rust. These blooms spread along the weld line and weaken the joint.
- Sagging gates after hurricane-force winds. Big storms warp frames and pull operators out of alignment. A gate that worked fine in September might drag on the ground or refuse to close by October.
Pricing for Gate Parts & Welding in Marco, FL
Hinge replacement in Marco typically runs $180 to $420 depending on how many hinges and what condition the surrounding steel is in. Post replacement runs $350 to $700 per post, including cutting out the old concrete and setting new galvanized footings. Rail repair and weld reinforcement usually land between $150 and $400. Custom welding jobs, like fabricating a matching section for an ornamental gate, range from $250 up to $1,200 or more depending on material and complexity. If you want an exact number before any work starts, that’s how we do it. We quote it, you approve it, and that’s the number on the invoice. No trip charge inside the county. And remember, we take $40 off any repair over $200.
Senior and veteran? You get a permanent 10% discount across the board.
We Also Serve Cities Near Marco
Our gate parts and welding work covers all of Marco and the surrounding communities. If you are on Marco Island, in Naples Manor, East Naples, or Naples, we can have someone out to you without the runaround. Dispatch and scheduling are coordinated from our Miami area office, and crews serve Marco locally.
Serving Marco, FL - Our Local Coverage Area
We’re based in the Marco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Marco
On Marco, you should inspect your hinges every 12 months and expect to replace them every 7 to 10 years if they’re bare steel. Stainless steel hinges on a properly prepped frame can last two to three times that long. The salt air here never stops, so schedule an inspection before hurricane season. Call (877) 610-2993 and we will tell you over the phone whether what you’re seeing is wear or corrosion.
Yes, and we do it regularly in Marco’s Deltona-built canal-front neighborhoods. The crack gets ground clean, welded with a rod matched to the original steel, then blended with primer and paint that matches the patina. Call (877) 610-2993 and we’ll take a look. Most 1970s ornamental gates are repairable for far less than a replacement copy would cost.
Because it sat idle through the worst of Marco’s salt-humidity months, and any moisture inside the board or connections had five or six months to corrode. This is so common on Marco that the October-November reopening rush is our busiest window of the year. Call (877) 610-2993 and we’ll diagnose it quickly.
Usually we replace only the post, provided the gate panel itself is structurally sound. A gate sags in the hinge post, not in the middle. On Marco, we regularly replace a single post on a 50-year-old ornamental gate and get decades more out of the panel. Call (877) 610-2993 for an honest assessment. If the post is fine, we’ll tell you that, too. We don’t sell work that doesn’t need doing.
UL 325 is the safety standard that requires automated gates to have entrapment protection, like photo eyes, safety edges, or current-sensing reversal, so a closing gate can’t pin a person or a pet. Every automated gate on Marco, including custom welded gates on high-end canal-front properties, must meet this standard. We handle the power run, the safety edges, and the entrapment sensors as part of any repair or installation. Call (877) 610-2993 and we’ll make sure your gate is code-compliant before anyone gets hurt.
Call Gatewood Fence & Gate in Marco
If your gate is sagging, seized, cracked, or the operator just clicks and won’t move, call (877) 610-2993. A live person answers, day or night. We’ll give you a straight answer about whether it’s worth welding or time to replace, and the price we quote is the price you’ll see on the invoice. Written in stone, agreed before any work starts. Hal’s name is on the shop, and the 90-Day Done Right Promise is on every job.
Written by the team at Gatewood Fence & Gate, serving Marco since our first service call here under Hal Gatewood’s name.