Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in New Braunfels, TX
Gate repair in New Braunfels typically costs $180 to $850 depending on whether you need a simple weld fix or full operator replacement, and most repairs are finished same day or next morning. We cover ZIP codes 78130, 78131, 78132, and 78135 weekly, from HOA subdivisions in Vintage Oaks to river-corridor rentals off FM 306. Call (877) 610-2993 and a live person answers, 24 hours a day.
New Braunfels is a town where a gate earns its keep. Between the ornamental iron along 78132’s new subdivisions and the river cabins off FM 306 that see a hundred keypad entries in a weekend, gates here shoulder a workload most hardware was never built for. When a gate won’t open at 6 a.m. before the school run, or a strike plate has come loose on a rental cottage right as check-in hits, you need someone who knows the difference between caliche and clay, and who will actually show up in the window they promised.
Why New Braunfels Homes Are Different
New Braunfels sits in Flash Flood Alley, and the caliche soil under 78132 does not drain so much as hold water and heave. After hard rain, gate posts lean, swing gates bind, and slide gates drag over tracks that were level a week earlier. February 2021 left its own mark too: cracked operator housings and fried control boards on automated gates that builders never weatherized for a hard freeze.
Along the Comal and Guadalupe corridors, the moisture is constant, and older wooden gates on rental cabins rot at the post line faster than anywhere else in the county. On River Road, gates run hundreds of remote actuations per week during tubing season. A residential-grade operator installed in March will often be dead by August. The fix is a commercial-duty motor, moisture-sealed connections, and a controller mounted high and dry; we learned that on this stretch of river the hard way, and now we spec it from the first visit.
No neighboring city combines both at this scale: one of the fastest-growing master-planned community sectors in Texas and a dense corridor of Guadalupe River vacation-rental properties. Gate repair here splits between HOA-mandated ornamental iron driveway gates on new construction and heavily abused entry gates on short-term rental river cabins that cycle through hundreds of guests each summer season.
Gate Repair in New Braunfels
Gate repair in New Braunfels runs from simple hinge welds on ornamental iron to full operator replacements on gates that have been binding since the last big rain. We see the same patterns every week: posts that leaned after a Flash Flood Alley downpour, welds that cracked under the cycle load of a busy rental, and control boards that finally gave up after February 2021’s freeze. Our crew carries welding equipment, steel stock, and common operator parts on the truck, so most standard repairs finish in one trip.
We repair what other companies want to replace. Hal Gatewood has been fixing gates by hand since 2001, and he’ll weld a cracked hinge or reset a leaning post before he quotes you a whole new gate. That’s the Gate Repair philosophy we bring to every job in 78130, 78131, 78132, and 78135.
Weld Repair and Hinge Fixes
A gate sags in the hinge post, not in the middle, and that’s where we start. On ornamental iron gates in Vintage Oaks and Veramendi, we regularly see hinges pulled out of powder-coated posts because the footing settled after a hard rain and nobody shimmed the gate level. We cut out the fatigued metal, weld in new hinge plates with proper penetration, and correct the alignment so it doesn’t repeat in six months. A typical weld repair on a cracked hinge or post in New Braunfels runs $180 to $340.
Gate Realignment and Post Reset
After the caliche gets saturated, the post leans and the throw binds against the strike. We dig to the footing, reset the post in concrete mixed for Hill Country soil, and brace it true before hanging the gate back. On river-corridor properties near the Guadalupe, we’ll add drainage around the base so the next downpour doesn’t pond and start the cycle over. Gate realignment and post reset in New Braunfels typically runs $275 to $520.
Operator and Control Board Replacement
February 2021 cracked housings and fried boards we still see in Creekside and Gruene. We replace the board, re-seal the housing against moisture, and if the original unit was undersized for the gate weight, we’ll tell you straight. River-road rentals need commercial-duty operators, not the residential-grade units builders install. Operator or control board replacement in New Braunfels runs $420 to $850.
How much does gate repair cost in New Braunfels?
Most repairs run $180 to $850 depending on whether it’s a weld, a post reset, or a full operator swap. Every price is quoted and agreed in writing before any work starts, with no trip charge inside the county and $40 off any repair over $200. Call (877) 610-2993 for an exact quote; estimates are free.
Can you repair my gate today in New Braunfels?
We schedule repair calls same-day or next-morning across New Braunfels, and a live person answers 24/7 at (877) 610-2993. If your gate is stuck open and you’ve got a pool, pets, or guests arriving, tell us when you call and we’ll prioritize the trip.
Gate Installation in New Braunfels
Most gate installation in New Braunfels falls into two camps: ornamental iron driveway gates on newer HOA homes in 78132, and river-corridor gates along FM 306 and River Road that see more use in one summer than a typical residential gate sees in five years. Neither one forgives sloppy installation. We know where the caliche runs shallow, which posts lean after a hard rain, and why a $400 builder-grade operator dies before its second birthday on a heavy iron gate.
We measure, order, and schedule every installation properly. No same-day promises on new builds; that work deserves planning, not rushing. When you’re ready for Gate Installation, we’ll set a firm window and keep it.
Driveway Gate Installation
Most driveway gates in New Braunfels are ornamental steel or wrought iron, set into caliche and limestone that expands and contracts with every wet-dry cycle. We set posts deep enough to stay put through Flash Flood Alley rain events, then weld and hang the gate so it swings true on the first try. Whether you’re on a half-acre in Vintage Oaks or a corner lot in Veramendi, we build for the soil you actually have. A basic single swing driveway gate in 78131 or 78130 typically runs $2,800 to $5,500, depending on width, material, and whether the post footings need re-digging for drainage.
Sliding Gate Installation
Sliding gates are common on newer New Braunfels lots where a swing gate would eat too much driveway. The trick is the track bed: caliche shifts, rain saturates, and a poorly bedded track starts binding within a season. We pour and level the track for New Braunfels’s actual drainage patterns, then set the gate so it rolls without dragging. Sliding gates run $4,500 to $10,000 because the track work is heavier.
Pedestrian Gate Installation
Pedestrian gates on river-road rentals route every guest through a walk gate, often a dozen times a day during tubing season. We install and reinforce them with heavier hinges and closers rated for commercial traffic, because standard residential hardware simply doesn’t survive that volume. Pedestrian gates run $900 to $3,200, with automation adding $1,200 to $3,500 more depending on operator type.
How fast can you get to New Braunfels for a gate installation estimate?
We can usually get an estimate to you within 24 to 48 hours, depending on where you are in New Braunfels and how full the schedule is that day. We don’t promise same-day for new installation work, because that job deserves measuring and planning, not a rushed quote. Call (877) 610-2993 and we’ll set a firm window.
Do New Braunfels gate prices include HOA compliance?
Yes. Newer subdivisions in 78132 have strict HOA standards for ornamental iron and steel, and we build to spec the first time so you don’t get a violation letter and a redo bill in the same month. We quote every job up front, in writing, and that’s the number you pay.
Gate Motor & Opener in New Braunfels
A gate motor replacement or opener repair in New Braunfels typically runs $180 to $2,800 depending on whether the operator needs a new capacitor or a complete assembly, and most jobs finish in a half day. We work the 78130, 78131, 78132, and 78135 ZIP codes every week, from Veramendi to Vintage Oaks to the river cabins off River Road. When your opener quits at 7 a.m. on a Monday, you need someone who answers live and knows whether the problem is the board, the motor, or the binding throw that killed both.
We service nine major brands including Viking, Ghost Controls, and DoorKing, and we stock common parts so you’re not waiting a week for a mail-order board. For Gate Motor & Opener work, we diagnose first, replace only what needs replacing, and upgrade to commercial duty when the gate weight or cycle count demands it.
Motor Repair and Board Replacement
Most “dead” gate motors aren’t actually dead. The capacitor is swollen, the limit switch slipped, or the control board has a burned relay. Hal can commonly fix those in a single trip. The February 2021 freeze left a legacy in New Braunfels: cracked operator housings and failed circuit boards on units that were never weatherized for hard freezes. A standard gate-motor repair in New Braunfels runs $180 to $450, covering a new capacitor, limit switch, or control-board relay.
Linear and Slide Motor Installation
Linear-arm openers handle long, heavy swing gates better than standard arms, but the weak points are the arm extension and internal limit assembly. When caliche shifts seasonally and the throw binds, the motor strains and burns out. We correct the binding at the hinge post and the operator, so the new motor doesn’t cook itself in a year. A linear motor unit typically runs $1,400 to $2,200 installed, while slide-motor installations on ranch entrances off FM 306 average $1,800 to $3,200 because the track, carriage, and safety edges all need attention.
Commercial-Duty Upgrades for Rental Properties
Short-term rentals along River Road and the Guadalupe run gates through hundreds of keypad entries every week during tubing season. Standard residential operators burn out in a single summer. We install commercial-duty units and strengthen the keypad wiring so the system holds up. Full operator replacement lands between $900 and $2,800, depending on whether it’s a swing arm, linear, or slide system and whether we need to upgrade to commercial duty.
How fast can you get to New Braunfels when a gate motor dies?
We schedule New Braunfels gate-motor calls same-day or next-morning in most cases, and for emergencies, call (877) 610-2993 any time. A live person answers 24/7, not a voicemail. If your gate is stuck open and you’ve got a pool, a dog, or guests arriving, tell us that when you call and we’ll prioritize the trip.
Does the 90-Day Done Right Promise apply to gate motor work in New Braunfels?
It applies everywhere we work. It’s in writing on every job: if the repair doesn’t hold up or the new opener fails within 90 days, we fix it at no charge. One call brings Hal back. No fine print, no “that part isn’t covered.”
Gate Access Control in New Braunfels
A gate access control system in New Braunfels typically runs $85 to $2,800 installed depending on whether you’re adding a keypad to an existing opener or building out a full phone-entry and video intercom setup. Most repairs and new installations across ZIP codes 78130 and 78132 can be started within one to two business days, with emergency calls handled same day. If your keypad is dead, your remote stopped talking to the board, or a vacation rental gate needs owner-controlled access for cleaners and guests, we handle the hardware and the programming on site.
We install and service Gate Access Control without ripping out working openers just to sell you a new one. If the existing motor is older but sound, we’ll match a reader or keypad to it. That’s the Hal Gatewood way.
Keypad Entry Systems
Keypad entry is the workhorse on New Braunfels properties, especially on 78132 HOA homes where the front gate is the first thing guests and delivery drivers see. The Texas Hill Country sun cooks plastic keypads fast, and the cheap ones installed by builders never should have been outdoors here. A standard wired or wireless keypad replacement in New Braunfels runs $180 to $450 installed, depending on whether it’s a simple code pad or a backlit, weather-sealed unit rated for direct sun and river humidity.
Phone Entry Systems
Phone entry is growing fast in New Braunfels, especially on newer builds and STR properties where owners want to open the gate for cleaners, plumbers, or guests from anywhere. A cell-based phone entry system wired into an existing opener typically runs $700 to $1,600 installed in New Braunfels, including the cellular module, app setup, and testing. These work over cell signal rather than landline, which matters because a lot of river-corridor properties don’t have wired phone lines worth relying on.
Remote and Card Reader Service
New Braunfels homeowners run anywhere from two to eight remotes per property, and on river-road rentals the number is often higher. Reprogramming a remote or adding a new one to an existing receiver costs $85 to $160. If the receiver itself has failed, you’re looking at $220 to $500 for a new unit plus labor. Card readers for commercial gates, church lots, and HOA amenity entrances run $400 to $1,100 depending on mounting surface and opener compatibility.
Can you handle access control on a river rental property with heavy guest traffic?
Yes, and that’s one of our most common calls in New Braunfels. STR gates on River Road and FM 306 need commercial-duty operators, weather-sealed keypads, and a phone entry system the owner can control remotely. We’ve retrofitted dozens of these properties after the builder-installed residential unit burned out mid-summer. Call (877) 610-2993 for an exact quote; estimates are free.
Is gate access control in New Braunfels more expensive than in nearby cities?
Pricing runs about the same across the corridor. What changes in New Braunfels is the install environment: limestone and caliche footings, river-rust on older steel, and sun exposure. Those don’t inflate hardware cost, but they mean we spend more time getting mechanical alignment right before we wire the access system. You’re paying for correct work, not a city premium.
Gate Parts & Welding in New Braunfels
When a gate sags in New Braunfels, it usually isn’t the gate itself that failed. It’s the hinge post letting go in caliche that got saturated after a Hill Country downpour, or a weld that finally cracked after a few hundred too many openings. We handle that work every week across 78130, 78131, 78132, and 78135, carrying steel stock, hinge sets, and welding equipment on the truck. If your driveway gate drags, if the latch won’t catch, or if a weld has split clean through, we fix it in your driveway rather than hauling it off.
Our Gate Parts & Welding crew welds on site so the gate stays where it belongs. Hal Gatewood has been welding fence and gate steel since 2001, and he’ll tell you straight whether a repair will hold or whether the frame is too far gone.
Hinge Replacement
Hinge replacement starts with a reality check: the hinge didn’t fail on its own, the post moved or the weld fatigued. On ornamental iron gates in 78132 HOA subdivisions, we see hinges pulled out of powder-coated posts because the gate wasn’t shimmed level after footing settlement. We replace the hinge, correct the alignment, weld it solid, and the gate won’t drop again in six months. Typical hinge replacement on a residential iron gate in New Braunfels runs $180 to $380.
Post Replacement
Post replacement here is different than in most Texas towns. Caliche handles compression fine but turns slick and unstable after heavy rain, which is exactly when gate posts start leaning. We dig the old post, set the new one in concrete mixed for Hill Country soil, and brace it true before welding the gate back. If the post sits in a low spot near a river corridor, we’ll add drainage so water doesn’t pond around the base. Post replacement runs $400 to $900.
Rail Repair and Custom Welding
Rail repair shows up constantly on older river-corridor properties along River Road, where moisture off the Guadalupe gets into every pinhole in the steel. We cut out the bad section, weld in new steel, and finish it so the repair doesn’t look like a patch. Custom welding covers everything from adding a pedestrian gate inside an existing driveway gate to building brackets for retrofit automation on gates that were never designed for it. Rail repair runs $150 to $350, and custom welding runs $250 to $800.
Can you weld a gate back together the same day if it breaks?
In most cases, yes. We carry steel stock, hinge sets, and welding equipment on the truck, so a cracked weld or snapped hinge on a standard gate can be repaired in one trip. Emergency welding in New Braunfels usually runs the same price as scheduled work. Call (877) 610-2993 and we’ll tell you straight what same-day welding will involve.
What does your 90-Day Done Right Promise cover on welding work?
It covers every weld, hinge, post set, and rail repair we perform in New Braunfels. If any part of the work fails within 90 days, we come back and make it right at no charge. The promise is written on every invoice, not buried in fine print. Call (877) 610-2993 and ask for Hal if you want to hear it from the person whose name is on the shop.
Brands We Service in New Braunfels
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Viking, Ghost Controls, and DoorKing locally, which means faster turnaround on repairs that would otherwise wait for mail-order boards or arm assemblies. For a full list of brands and models, see our brands page.
Pricing for Gate Repair in New Braunfels, TX
| Service | Typical Range in New Braunfels |
|---|---|
| Weld repair, cracked hinge or post | $180 - $340 |
| Gate realignment / post reset | $275 - $520 |
| Operator or control board replacement | $420 - $850 |
| Keypad, remote, or photo eye repair | $150 - $360 |
| Single swing driveway gate install | $2,800 - $5,500 |
| Double swing driveway gate install | $5,000 - $9,500 |
| Sliding gate install | $4,500 - $10,000 |
| Pedestrian gate install | $900 - $3,200 |
| Gate motor repair | $180 - $450 |
| Full operator replacement | $900 - $2,800 |
| Linear motor installed | $1,400 - $2,200 |
| Slide motor installed | $1,800 - $3,200 |
What pushes price up in New Braunfels is the ground itself: caliche footings that need drainage work, river-corrosion on older steel, and the commercial-duty upgrades that rental properties and heavy iron gates actually need. Every price is quoted and agreed in writing before any work starts. No trip charge inside the county, $40 off any repair over $200, free second opinion on any written estimate, and 10% off for seniors and veterans.
Neighborhoods We Serve in New Braunfels
We work all over New Braunfels, and a few areas keep us especially busy. We typically arrive same day or next morning for repair calls across the area.
- Vintage Oaks (78132) - ornamental iron driveway gates with limestone post footings
- Veramendi (78130) - new construction, HOA-standard gates and operators
- Creekside (78130) - slide gates and access control for larger lots
- River Road / FM 306 corridor (78132) - high-cycle rental gates, hardened motors
- Gruene (78132) - older wood-and-metal gates, moisture-heavy post rot
Service Area - Cities Near New Braunfels
We serve New Braunfels, TX directly, with dispatch and scheduling coordinated from our San Antonio office and crews serving locally. We also work in Cibolo, TX, Selma, TX, Schertz, TX, Universal City, TX, and Live Oak, TX. No trip charge applies inside the county on any of these calls.
Serving New Braunfels, TX - Our Local Coverage Area
Gatewood Fence & Gate crews serve New Braunfels and the communities around it; dispatch is coordinated from our San Antonio office. The map shows the New Braunfels coverage area; if your address is on it, we can help.
Also serving nearby: New Braunfels, TX, Cibolo, TX, Selma, TX, Schertz, TX, Universal City, TX, Live Oak, TX.
FAQs About Gate Repair in New Braunfels
We schedule repair calls same-day or next-morning across all New Braunfels ZIP codes, and a live person answers 24/7 at (877) 610-2993. If your gate is stuck open and you’ve got security or safety concerns, tell us when you call and we’ll prioritize the trip. Planned installations are scheduled properly instead of rushed.
Yes. We build and repair to HOA spec the first time, using ornamental iron and steel finishes that match what the association approved. You won’t get a violation letter and a redo bill in the same month. We quote every job up front, in writing, and that’s the number you pay.
We still see cracked operator housings and fried control boards from that freeze all over New Braunfels, especially in Creekside and Vintage Oaks. We replace the board, re-seal the housing against moisture, and upgrade to weather-rated equipment where the original was never built for a hard freeze. Call (877) 610-2993 for an exact quote; estimates are free.
Ready to get your gate fixed right? Call (877) 610-2993 any time, day or night. A live person answers, we’ll give you a real arrival window, and every job carries Hal Gatewood’s 90-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What New Braunfels Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks