Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Kenmore
Gate parts and welding in Kenmore usually means one of two things: a hinge or post that finally gave out after decades of lake-effect winters, or a gate that needs a custom fix because the space it hangs in was never designed for a modern replacement. Most jobs on the 1920s and 1930s bungalows around here run $180 to $420 for hinge and post repair, and $250 to $600 for custom welding on ornamental iron or chain-link. We get to Kenmore fast, we show up when we say we will, and Hal Gatewood answers the phone himself. Call (877) 610-2993 and you’ll be talking to a person, not a recording.
We know the old side-yard gates on Kenmore’s tight grid because we’ve worked on them for years. A gate that drags on the concrete in April was usually fine in October. That’s not an opinion. It’s the same pattern on block after block from Delaware Road over to Elmwood Avenue. Kenmore’s housing stock is old and dense, and the gates were built to match. We fix them the way they were meant to be fixed: on site, with welding, not by hauling your gate to some shop and selling you a new one you didn’t need.
Why Gatewood Fence & Gate Is Kenmore’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and his name is still on the door, the invoices, and every job we finish. That means the person who quotes your Kenmore gate repair is the person who stands behind the done-right promise, in writing, for 90 days. If something isn’t right, one call brings him back. No runaround. No “let me check with the office.” That’s a different kind of accountability than you get from a faceless crew two counties away.
Kenmore customers call us because they’ve already been burned. They got one price on the phone, then a bigger number when the truck showed up. That doesn’t happen here. We quote the job, you agree to it, and that’s the price. Every repair over $200 gets $40 off. If you have a written estimate from someone else, bring it and Hal will give you a free second opinion on it, no trip charge inside the county. Seniors and veterans always get 10% off, permanently. Those standing offers aren’t a promotion. They’re the way the shop has run since day one.
We carry parts for the brands Kenmore homeowners actually have: Linear, Viking, DoorKing, Ghost Controls, and the rest of the major names. When a gate motor or hinge bracket fails, we’re not waiting a week on a part from somewhere out of state. We stock what these old Kenmore gates need, and our welding stays on site. Your gate stays in your driveway. Fix the panel without the post and you’ll fix it twice, so we start at the post.
Our Gate Parts & Welding Services in Kenmore
Post Replacement
On Kenmore’s 40-foot lots, the hinge post is often just feet from the house foundation and the fence line. When decades of freeze-thaw heave that post out of plumb, the gate sags and binds. A blocked gate on these lots isn’t an annoyance; it cuts off the only route for lawn mowers, deliveries, and HVAC equipment. Digging a post inside a shared driveway or right of way takes careful hand work so the neighbor’s fence and the driveway apron stay intact. In Kenmore, this job typically runs $240 to $450 including the new post, concrete, and re-hanging the gate.
Hinge Replacement
Original ornamental iron hinges from the 1930s and 1940s seize up with rust after enough Kenmore winters. When a hinge seizes and the gate still gets forced open or shut, the hinge ears crack or the welds fail. We cut the old hinge off, weld on a new heavy-duty one, and adjust the swing so the gate clears the concrete and latches square. Hinge replacement in Kenmore usually runs $150 to $300 per hinge, depending on whether we’re welding directly to ornamental iron or bolting to wood framing.
Rail Repair
Chain-link and ornamental iron gates both fail at the rail welds over time, especially after years of snow plow shoves and salt spray against the driveway edge. A broken bottom rail weld leaves the gate dragging, twisting, and unlatchable, which usually shows up right when spring cleanup starts. We straighten what’s straightenable, cut out what isn’t, and weld in new rail stock. On a typical Kenmore side-yard gate, rail repair and re-welding runs $200 to $380.
Custom Welding
Kenmore’s old gates were built in sizes nobody stocks anymore. When a 60-year-old gate needs a new hinge bracket, an extended latch, or a slide-gate conversion because a swing gate won’t fit a narrow driveway, you can’t get that off a shelf. We weld it on site. Custom welding work in Kenmore, including fabrication and finishing, generally starts around $250 and runs up from there based on the amount of steel and time involved. Show me the gate closing on its own and I’ll show you where it’s failing, and we’ll weld it right there in the driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kenmore
Most Kenmore homeowners don’t think about their gate opener brand until it stops working. We service all the common brands found around the 14217 zip code: Linear, Viking, DoorKing, Ghost Controls, plus LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We keep the parts these old systems need and we’re certified to work on all of them. If you have a Viking operator that’s chewing through gears or a DoorKing swing arm that won’t reverse, we can diagnose it and fix it without selling you a full replacement unless you genuinely need one.
Common Gate Parts & Welding Problems We See in Kenmore Homes
- Shared driveway gates that sag and scrape. On streets off Delaware Road and Mang Avenue, the original post footing was often set too close to the asphalt edge. Years of freeze-thaw heave the post toward the driveway, the gate drops, and it scrapes concrete every time it swings. Sometimes it blocks the neighbor’s bins entirely.
- Twisted posts on narrow side yards. When the house occupies nearly the full lot width, a gate hangs between the foundation and the fence line with almost no clearance. Post twist throws the latch out of alignment and the gate won’t catch. That locks out backyard access for HVAC servicing and mower delivery right when you need it.
- Broken bottom rail welds from salt and plow shoves. Chain-link gates on 40-foot lots take hits from snow clearing equipment and sit in salt spray all winter. The bottom rail weld fails, the gate drags, and spring cleanups turn into a wrestling match.
- Seized hinges on original ornamental iron. Kenmore’s 1920s and 1930s iron gates are beautiful until the hinges rust solid. Then the gate either won’t move or the hinge ears crack when someone forces it. We drill, cut, and weld in replacements that match the old ironwork.
Pricing for Gate Parts & Welding in Kenmore, NY
Here’s what Kenmore homeowners can expect to pay, on average, for the most common gate parts and welding work:
| Service | Typical Kenmore Price Range |
|---|---|
| Hinge replacement (per hinge) | $150 - $300 |
| Post replacement (includes concrete and re-hanging) | $240 - $450 |
| Rail repair and re-welding | $200 - $380 |
| Custom welding and fabrication | $250 - $600+ |
| Gate roller and track repair | $180 - $350 |
| Latch and lock replacement | $120 - $240 |
These are the real numbers Kenmore customers see on our written quotes. The price we agree on before work starts is the price on the invoice when we finish. That’s not a slogan; it’s how a shop with its owner’s name on the building operates. Every quote is free, and there’s no trip charge inside the county. If you have a written estimate from another company, bring it. We’ll give you a straight second opinion. Call (877) 610-2993 and ask for Hal.
We Also Serve Cities Near Kenmore
We work all over the northtowns. If you’re in Tonawanda, Amherst, Eggertsville, or Buffalo, our Gate Parts & Welding crew can get to you just as quickly. The same pricing, the same 90-Day Done Right Promise, and the same live person on the phone when you call. Kenmore is home base for a lot of our work, but the truck goes wherever the gate is.
Serving Kenmore, NY - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Kenmore
Yes. The original post footing in a shared driveway off Mang Avenue or Keller Road often sits inches from the property line, so we hand-dig the old footing rather than machine-excavate, then sister or sleeve a new steel post into the same hole. In a recent job off Mang Avenue, we replaced a rotted hinge post for a 1940s ornamental iron swing gate that had sagged so badly it scraped the concrete and blocked the neighbor’s trash bins. The post sat 18 inches from the foundation and the right of way was shared, so we dug by hand, set the new post in the same hole, and welded a replacement hinge bracket so the gate cleared the apron and both driveways kept working. Call (877) 610-2993 and we’ll walk your shared driveway the same way.
That’s freeze-thaw post heave, and it’s the most common gate failure we see in the 14217 zip code. Kenmore sits in the Lake Erie lake-effect snow belt and routinely absorbs 90-plus inches of snow a winter. The ground freezes deep and thaws repeatedly, moving the post a fraction at a time until the gate drops enough to drag on the concrete. In fall the ground is dry and compact, so the gate works; in spring the heave shows up and the latch misses the strike. The fix is to reset or sleeve the post and re-align the hinge. We do this throughout Kenmore every spring. Call (877) 610-2993 before the drag gouges your concrete apron.
Yes, and we’ve done it on Kenmore lots where a swing gate would hit the house or the neighbor’s fence. A slide gate runs on rollers along a track and stays parallel to the fence line, so it uses the length of the driveway instead of the width. We fabricate the gate frame, weld the panels, install rollers and track, and tie it to an operator if you want automated opening. In Kenmore, these projects usually start around $450 for the gate and track, with motorized options above that depending on the operator brand. Call (877) 610-2993 for a free measure and written price.
We do. Worn rollers grind, jump the track, and put extra load on the operator until something gives. On Kenmore slide gates we replace rollers, straighten or replace bent track sections, and adjust the gate so it runs true and the operator isn’t fighting the gate. This work in Kenmore typically runs $180 to $350 depending on the number of rollers and condition of the track. A gate that fights the track is a gate that burns out an operator early. Call (877) 610-2993 and we’ll inspect the rollers and track before recommending any replacement parts.
Yes, and usually that’s the right call. On Kenmore’s narrow side yards, gate latches miss the strike when the post twists or the gate drops from hinge wear. We weld on a new heavy-duty latch or weld up the old strike plate and re-drill it so the gate actually catches and stays caught. A new latch in Kenmore typically runs $120 to $240 including welding and adjustment. A gate that won’t latch isn’t a security feature; it’s a security hole. Fixing the latch is almost always cheaper than replacing the gate. Call (877) 610-2993 and we’ll look at what’s actually wrong before anyone reaches for a catalog.
Call Gatewood Fence & Gate for Gate Parts & Welding in Kenmore, NY
If your Kenmore gate is dragging, sagging, seized, or won’t latch, call (877) 610-2993. A live person answers, around the clock. Hal will get the details, give you a straight answer on what it’ll take, and set a time that actually works. We show up in uniform, we work on site, and we put the 90-Day Done Right Promise in writing. For homeowners in Kenmore, that’s the difference between a gate that works and a gate that blocks the backyard for another season.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kenmore and the northtowns since 2001.