Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Carrollton, TX
Most Carrollton gate repairs run $140 to $420 and can be scheduled within 24 to 48 hours, with same-day routing for gates stuck open or that won’t secure. We work across all four Carrollton ZIP codes - 75006, 75007, 75010, and 75011 - and a live person answers the phone at (877) 610-2993 any hour of the day. The crews that come through Carrollton know what the Blackland Prairie clay does to a post set thirty years ago, and we fix it in your driveway rather than hauling your gate off somewhere.
Why Carrollton Homes Are Different
Carrollton’s major residential buildout happened in the 1980s and early 1990s, meaning a large cohort of cedar privacy fence gates across the city is now hitting the 25-to-35-year failure window simultaneously. This aging wood stock sits on DFW’s notorious Blackland Prairie shrink-swell clay, which migrates gate posts seasonally and compounds wear - making Carrollton a market where gate repair demand is driven by two converging forces no neighboring city shares in exactly the same proportion.
The southern 75006 ZIP carries the city’s oldest fencing stock, much of it original to 1970s homes, while the northern 75007 and 75010 areas hold heavier concentrations of 1980s and 1990s construction. Original posts in many of these yards were set with minimal concrete footings, leaving them vulnerable to clay-soil movement that has been working on them for decades. The February 2021 ice storm added another layer of damage, snapping wood boards and cracking welds on ornamental iron gates across the city. A gate that latches cleanly in August may bind or gap by March - that’s not the gate being difficult, that’s the ground moving under the post.
Gate Repair in Carrollton
Gate repair in Carrollton usually starts with a post problem disguised as a hinge problem. The clay swells with winter and spring rains, contracts hard during summer drought, and original cedar posts set in undersized concrete footings have rotated two to four inches out of plumb. A gate that latches in August and drags in March is telling you exactly where it’s failing. We weld and brace on site so the gate stays in your yard, not on a truck bound for some shop across the metro.
Electric Gate Repair
Electric gates in Carrollton suburbs fail in two common ways: sensors knocked out of alignment by post movement, and circuit boards worn down from years of Texas heat. We service FAAC, BFT, Linear, Viking, and several other major brands, and we’re certified to work on nine of them. A typical electric gate repair in Carrollton runs $180 to $420 depending on whether it’s a sensor, a board, or a wiring issue. If the gate still opens but the safety sensor is beeping, that’s usually the cheaper end.
Hinge and Post Repair
This is the backbone of gate repair work in Carrollton. Original cedar posts set in the 1980s and early 1990s often went in with minimal concrete, and the clay here has spent decades working them loose. When a hinge post rotates even a few inches out of plumb, the gate starts binding, scraping, or hanging visibly crooked. In most cases, the fix isn’t just swapping a hinge - it’s resetting the post, and that job runs $300 to $450 because it involves concrete and bracing. We weld and brace on site so the gate stays in your driveway.
Gate Realignment
A gate that latches in August and binds by March is a classic Carrollton problem. The clay swells in winter and spring rains, then contracts in summer drought, and the gate that was square last season isn’t square now. We don’t just force a latch - we realign the gate to the post as it sits now, then adjust hinges so future movement doesn’t immediately undo the work. Realignment in Carrollton usually runs $140 to $280. It’s the most common single repair we do here, and it’s the one that makes the gate feel right again.
For a deeper look at how we approach repair work across all gate types, see our full Gate Repair page.
How fast can you get to a gate repair in Carrollton?
In most cases, we can have a crew to your Carrollton home the same day you call, and emergency calls are answered by a live person 24 hours a day, seven days a week. A gate that won’t close is a security problem, so we treat it like one. Call (877) 610-2993 and you’ll get a real person, not a voicemail.
What does gate repair cost in Carrollton compared to nearby cities?
Carrollton prices run roughly the same as Addison, Farmers Branch, Coppell, and The Colony: $140 to $280 for realignment, $200 to $350 for hinge work, $180 to $420 for electric repairs. The difference in Carrollton isn’t the base price - it’s how often post resets come into play because of the clay soil, which can push a job to $300 to $450. We quote that before any work begins.
Gate Installation in Carrollton
A new driveway gate in Carrollton typically runs $2,800 to $7,500 installed, depending on whether you’re doing a basic swing gate or a full automated double gate with operators and safety edges. Most jobs take one to two days once materials arrive, and we quote the full price in writing before any work starts. The big local factor is the post - on Blackland Prairie clay, a gate post set less than 30 inches deep with a small concrete collar will move within a few seasons, and we plan for that from the first measurement.
Driveway Gate Installation
A driveway gate in Carrollton is usually a swing or slide gate across a two-car or three-car driveway entrance, often automated with an opener. We set driveway gate posts 30 inches minimum and use steel posts on automated gates, because an operator torquing on a post that’s already rotating is a failure waiting to happen. A basic single swing gate with new posts and hardware runs $1,800 to $3,500, while a double swing gate runs $3,200 to $6,500.
Pedestrian Gate Installation
Pedestrian gates in Carrollton are usually the 3-to-4-foot cedar gates built into a run of privacy fence, often next to a side yard or along the side of the garage. These gates take a beating because people slam them, kids swing on them, and the posts they’re hung on are the same undersized cedar posts used in the fence line. Installing a new pedestrian gate usually means setting a proper post first. A standard cedar pedestrian gate in Carrollton runs $350 to $800 depending on width and hardware.
Automated Gate Installation
An automated single driveway gate with a quality operator runs $4,200 to $8,800 in Carrollton, and an automated double gate runs $5,800 to $11,500. These ranges include the gate, posts, footing work, hinges, hardware, and operator. What moves the price is gate size, steel versus cedar, post condition, operator choice, and whether we’re replacing old posts or starting fresh. Current UL 325 standards require entrapment protection on automated gates, which we include and test before we leave.
For more detail on materials, operators, and the full installation process, visit our Gate Installation page.
Why do my Carrollton gate hinges fail even after I replace them?
Because the hinge isn’t the problem - the post is. Carrollton sits on Blackland Prairie clay that swells with spring rains and contracts in summer heat. A cedar post set in minimal concrete 25 or 30 years ago rotates with that movement, and once it’s out of plumb, no hinge will hold the gate square for long. The post has to be reset or replaced before new hinges go on.
Can I install a solar gate opener on my Carrollton driveway gate?
Yes, in most cases. Solar openers work well on Carrollton driveway gates because typical single-family gates here cycle 15 to 30 times a day, which a properly sized solar panel and battery bank can handle. The main limitation is shade - if your gate sits under heavy tree canopy or the panel would face north, solar may not keep up, and a hardwired unit is the better call.
Gate Motor & Opener in Carrollton
When a gate motor dies in Carrollton, it usually happens on a schedule nobody picked. The opener worked fine Thursday night; Friday morning it just hums, or clicks once, or does nothing at all. Gate motor repair in Carrollton typically runs $180 to $420 for most common failures, and a new motor installation usually lands between $850 and $1,400. If you live in the 75006, 75007, 75010, or 75011 ZIP codes, we can usually have someone at your gate the same day you call.
Motor Installation
A new gate motor in Carrollton is a two-part job: the opener itself and whatever the existing gate has been doing to it. Many of the gates off Josey Lane and Hebron Parkway were hung years ago, before anyone accounted for how much this clay moves. We measure the gate’s true weight, check the post for lean, and set the new opener so it runs clean from day one. A replacement motor for a single swing gate, installed, lands between $850 and $1,400.
Motor Repair
Most Carrollton gate motor failures we see are not the motor itself - they are what the motor is bolted to. A gearbox strips. A capacitor gives up. A limit switch drifts. Sometimes it is a motherboard fried by a power surge that came through an old panel in a 75006 home built before grounded outdoor outlets were standard. We troubleshoot the whole run: motor, arm, hinge plate, receiver, and the post. Typical repair tickets in Carrollton run $180 to $420.
Linear Motor Service
Linear openers are everywhere in Carrollton, especially in the 75007 and 75010 subdivisions where builders put them in during the late 1990s. They’re good machines, but they don’t tolerate a leaning post. When clay movement pushes a post two or three inches out of plumb, the Linear arm has to fight the gate’s weight in a bind, and that burns the limit switches and the gear. If you have a Linear swinging a cedar gate and it has started groaning, the motor may be fine - the post may be the problem.
For more on motor brands, troubleshooting, and replacement options, see our Gate Motor & Opener page.
How fast can you get to my home in Carrollton?
Most Carrollton addresses can be reached the same day you call, often within a few hours. We keep service routes running through Carrollton daily because enough gates here need attention. Call (877) 610-2993 and the person who answers will give you a real arrival window, not a four-hour guess.
Is gate motor repair more expensive in Carrollton than in nearby cities?
No, Carrollton prices are in line with the rest of the Dallas-Fort Worth metro for most gate motor work. Repair tickets here generally run $180 to $420. The reason some Carrollton repairs cost more than a simple parts swap is the clay soil and the older posts, which sometimes need resetting before a new motor will run true. We tell you that upfront.
Gate Access Control in Carrollton
If your gate keypad has gone dark or your remote stopped working on the way home to Carrollton, we’re the local crew that can get it sorted without a runaround. Gate access control in Carrollton runs into two enemies more often than not: aging 1980s-era wiring and the shrink-swell clay we’re all built on. We work the full range, from simple keypad replacement to full video intercom setups, and we’re in Carrollton ZIPs 75006, 75007, 75010, and 75011 weekly.
Keypad Entry
A keypad at the driveway is the most common access point we service in Carrollton, and the most common failure is a worn keypad membrane - the numbers still click but the 3 or the 7 stops registering. In the older 75006 neighborhoods south of Belt Line, we regularly see keypads mounted to metal gooseneck posts that have leaned with the clay over twenty years, which stresses the cable connection and causes intermittent failure. A standard keypad replacement runs $150 to $275 installed.
Remote Control
When a remote stops working, the transmitter battery is the easy fix and the receiver board in the operator is usually the real one. Carrollton’s summer heat bakes electronics inside metal operator boxes; a receiver that lasted twelve years in a garage may die in eight on a west-facing driveway in 75010. We carry transmitters and receiver boards for FAAC, BFT, Linear, Viking, and the rest of the majors. A receiver board or remote kit runs $95 to $240 for the part, with labor generally folding into a one-hour service call.
Phone Entry Systems
Phone entry systems that let you buzz open the gate from your cell are popular in Carrollton’s larger lots and newer builds near Hebron Parkway. The system needs a reliable cellular signal and a properly grounded controller. We program the call-forwarding, set the delay times, and show you how to add or remove numbers yourself before we hand it back over. Fielding a new phone entry system with programming runs $450 to $850.
For more on access control options and integration, visit our Gate Access Control page.
How fast can you get to Carrollton for a gate access emergency?
Most Carrollton calls get same-day service, and if your gate is stuck open or stuck shut and preventing you from leaving, we treat that as an emergency and route the nearest truck to your ZIP right away. Call (877) 610-2993 and a live person will tell you exactly who is coming and when.
What does gate access control repair cost in Carrollton compared to nearby cities?
Carrollton pricing runs right in line with the north Dallas suburbs: keypad replacement $150 to $275, receiver boards $95 to $240, full phone entry installs $450 to $850. We don’t charge a trip fee inside the county, and the price you agree to on the phone is the price on the invoice.
Gate Parts & Welding in Carrollton
Gate parts and welding in Carrollton usually means one of two things: a cedar privacy gate from the 1980s or 90s that’s finally given up on its hinges, or an ornamental iron gate with a cracked weld that’s starting to sag. Either way, the fix usually costs $185 to $480 when it’s a hinge or latch repair, and $350 to $900 when a post has to be reset. We keep a mobile welding setup on the truck, so the work happens in your driveway, not in some shop across town.
Hinge Replacement
Carrollton gates built in the 1980s mostly hung on zinc-plated hinges that corrode where they contact cedar. Over time the hinge barrel binds, the screws loosen, and the gate starts dragging on the latch side. We replace the hinges with heavier-gauge hardware, and if the post is even slightly out of plumb, we say so before touching a screw. A hinge replacement on a standard six-foot cedar gate in Carrollton runs $125 to $285, including the hardware.
Post Replacement
This is the Carrollton specialty, and it’s not glamorous work. The original posts in most 75006 and 75007 yards went in with a 60-pound bag of concrete if they got any at all. Decades of clay-soil shrink-swell have rotated them two to four inches out of plumb. You can’t fix that with a hinge. We set a new treated post, usually at a larger diameter than what came out, and we set it deeper with a proper footing. Post replacement runs $320 to $780 depending on soil conditions and whether we’re working around a sprinkler line.
Custom Welding
We keep a mobile welding setup on the truck, so custom welding happens in your driveway. Cracked ornamental iron hinges, broken latch strikes, a drive gate leaf that’s separated from its frame, a steel post cap that’s rusted through and needs a new piece fabricated - we cut out the bad steel and weld in new. Custom welding in Carrollton runs $180 to $520 depending on the size of the repair and how much fabrication is involved.
For more on our welding capabilities and parts inventory, see our Gate Parts & Welding page.
How does your pricing in Carrollton compare to surrounding cities?
Our pricing is flat across the DFW metro, so Carrollton homeowners pay the same rates as someone in Coppell or The Colony: $125 to $285 for hinge replacement, $320 to $780 for post replacement, and $180 to $520 for custom welding. The difference in Carrollton isn’t price - it’s the soil. You’re more likely to need a post reset than someone in a city with less expansive clay. We’ll show you the post before you pay for the fix.
What kind of warranty do you offer on welding in Carrollton?
Every job, including welding, carries a written 90-Day Done Right Promise. If the weld fails or the hinge loosens or the gate starts sagging again, Hal comes back and makes it right. That’s not a phone-menu guarantee. It’s his name on the invoice.
Brands We Service in Carrollton
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for FAAC, BFT, Linear, and Viking locally, which means most Carrollton repairs don’t wait on shipping. If we don’t have it on the truck, we’ll tell you exactly when it’s coming and what your options are. See our brands page for full details.
Pricing for Gate Repair in Carrollton, TX
| Service | Typical Range in Carrollton |
|---|---|
| Gate realignment | $140 - $280 |
| Hinge replacement (cedar gate) | $125 - $285 |
| Hinge replacement (with post reset) | $200 - $350 |
| Electric gate repair (sensor/board/wiring) | $180 - $420 |
| Automatic gate repair | $160 - $400 |
| Post reset and re-concrete | $300 - $450 |
| Weld repair on iron gates | $180 - $400 |
| Gate motor repair | $180 - $420 |
| Single swing gate motor replacement | $850 - $1,400 |
| Keypad replacement | $150 - $275 |
| Custom welding (on-site) | $180 - $520 |
| Post replacement | $320 - $780 |
What pushes a Carrollton job higher is almost always the post condition - clay-soil movement means post resets are more common here than in cities with stable soil. Every price is quoted and agreed in writing before any work starts, with no surprise line items at the door. Seniors and veterans receive a permanent 10% discount, and any repair over $200 qualifies for $40 off.
Neighborhoods We Serve in Carrollton
We work across Carrollton regularly, from the older subdivisions off Josey Lane and Belt Line Road to the newer builds near Hebron Parkway. Our typical response time for scheduled repairs is 24 to 48 hours, with emergency calls routed same-day whenever possible.
- Castle Hills
- Indian Creek
- Homestead of Carrollton
- Josey Ranch
- Rosemeade
Service Area - Cities Near Carrollton
We dispatch and schedule from our Dallas-Fort Worth office, with crews serving Carrollton locally every day. If you’re just outside city limits, we also work in Addison, TX, Farmers Branch, TX, Coppell, TX, The Colony, TX, and Lewisville, TX. No trip charge applies inside the county.
Serving Carrollton, TX - Our Local Coverage Area
Gatewood Fence & Gate crews serve Carrollton and the communities around it; dispatch is coordinated from our Dallas-Fort Worth office. The map shows the Carrollton coverage area; if your address is on it, we can help.
Also serving nearby: Carrollton, TX, Addison, TX, Farmers Branch, TX, Coppell, TX, The Colony, TX, Lewisville, TX.
FAQs About Gate Repair in Carrollton
Yes. We work across 75006, 75007, 75010, and 75011, from the older south Carrollton neighborhoods built out in the 1970s to the newer subdivisions near Hebron in the northern part of the city. There’s no part of Carrollton that’s too far or too small for us to bother with.
Most gate repairs don’t require a permit in Carrollton, but new installations and any work that modifies a fence line along a property boundary may need city approval. If your neighborhood has an HOA, check their design guidelines too - some require pre-approval for style or height changes. We can tell you what we’ve seen other Carrollton homeowners need, but we don’t pull permits for you.
Because the ground under your post is moving. Carrollton’s Blackland Prairie clay swells with winter and spring rains, then contracts during summer drought. A post that was plumb in August may lean two inches by March, and that throws the gate out of square. It’s not the gate being difficult - it’s the soil doing what it has done for thousands of years. The fix is resetting the post properly, not chasing the alignment twice a year.
Call (877) 610-2993 for a free estimate on any gate work in Carrollton. A live person answers around the clock, and we’ll quote your job before we send anyone out.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Carrollton Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks