Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Franklin
Gate post replacement in Franklin typically runs $280-$620, hinge replacement $95-$240 per hinge set, and rail repair $150-$380 depending on how much of the bottom rail has rusted out. Those are the numbers Hal Gatewood quotes before any work starts, and they don’t change at the door. If your gate is dragging, sagging, or sitting crooked after the ground froze and thawed all winter, call (877) 610-2993 and we’ll put a live person on the phone. Not a voicemail. Not a chatbot. Somebody who knows Franklin and knows gates.
Why Gatewood Fence & Gate Is Franklin’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and the name on the shop is the same name on every invoice. That matters in a town like Franklin, where people still ask their neighbor who did their fence. Our Gate Parts & Welding team works on gates all over the 45005 ZIP, from the streets off River Street down by the Great Miami to the neighborhoods up toward Pennyroyal Road and the older blocks behind the former mill sites.
We’re the crew other companies hand work to when they’d rather sell you a whole new gate than fix a post. Hal’s philosophy is simple: the gate stays in your driveway, gets welded on site, and goes back to work. No hauling it off for two weeks. No swapping parts that weren’t failing. And every single job, from a $95 hinge replacement to a full post reset, carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.
Franklin homeowners have been burned by outfits that quote one price over the phone and show up with a different number on the clipboard. We don’t work that way. The price is agreed before the first wrench turns, and there’s no trip charge inside the county. You’ll also see Hal or his crew at the hardware store on Second Street. That’s the kind of accountability you can’t get from a company whose nearest office is three states away.
Our Gate Parts & Welding Services in Franklin
Hinge Replacement
Most Franklin gates sag because the hinge post has moved, not because the hinges gave up on their own. That said, forty to seventy years of freeze-thaw cycling along the Great Miami River corridor rusts hinge pins, seizes barrels, and wallows out screw holes. We replace gate hinges with galvanized or stainless hardware sized for the gate’s actual weight, and we re-plumb the post while we’re at it so the new hinges aren’t fighting a post that’s two inches out of level. Hinge replacement in Franklin typically runs $95-$240 per hinge set, including realignment of the gate leaf.
Post Replacement
If your wooden gate post is rotting below grade or your metal post has heaved out of plumb, new hinges won’t save it. Franklin’s floodplain soils hold water against the post footing all spring, and when the ground freezes and thaws, posts move. We cut out the old concrete, dig a deeper footing with drainage stone, set the new post in concrete, and re-hang the gate the same day in most cases. Post replacement in Franklin runs $280-$620 depending on post size, whether it’s wood or steel, and how much of the old footing has to come out.
Rail Repair
Chain-link gates from the 1940s through the 1970s are everywhere in Franklin, especially in the working-class neighborhoods built during the city’s industrial peak. The bottom rail near the hinge post is almost always the first thing to rust through, because water pools there and never fully dries in Franklin’s river-valley air. We cut out the rotted section, weld in a splice or a full replacement rail, and reinforce the connection so it doesn’t fail again next spring. Rail repair typically runs $150-$380.
Custom Welding
Some Franklin gates aren’t worth saving as-is, but they’re worth rebuilding. We weld on site: new pickets onto a sound frame, a heavier bottom rail onto an older swing gate, a custom bracket for a gate operator that was never designed for one. Hal’s been welding since before he opened Gatewood Fence & Gate, and he’ll tell you straight when a weld is the right fix and when it’s lipstick on a post that’s already gone. Custom welding work in Franklin starts around $120 and is priced upfront before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Franklin
Franklin has a mix of old manual gates and newer automatic operators, and we work on all of it. We service Viking, Ghost Controls, DoorKing, and Elite operators, plus plenty of older boards that aren’t made anymore. If your 1980s swing gate operator finally quit, don’t assume you need a whole new system. Hal can often rebuild or source a replacement board, re-weld the mounting bracket, and get you running for a fraction of a full install. We keep common hardware and weld stock on the truck, so most Franklin jobs don’t wait on a parts order.
Common Gate Parts & Welding Problems We See in Franklin Homes
- Rotted wooden hinge posts below grade. Flood-saturated clay soils along the Great Miami hold moisture against the post, and the section just below the surface rots first. The gate leans, drags, and eventually the hinges pull out entirely. Fixing it means a new post and a deeper footing, not just new hinges.
- Heaved metal posts after freeze-thaw winters. Franklin’s river-valley soils retain far more water than the higher ground in Mason or Lebanon. When temperatures swing across 32°F through the winter, posts can move two to four inches. Gates that closed fine in October suddenly won’t latch in March. We re-plumb, reset, and re-concrete.
- Rusted-through bottom rails on older chain-link gates. The original chain-link gates hung in the 1940s-1970s housing stock are now 40-70 years old. The bottom rail near the hinge post rusts from the inside out. We weld in splice sections or replace the rail entirely, depending on how much metal is left.
- Seized latch mechanisms after spring thaw. Heavier-gauge industrial chain-link installations, especially near the former mill districts, have hinges and latches that corrode badly from decades of river-valley moisture. The hinges seize, the latch won’t throw, and the gate either won’t open or won’t stay closed. We’ve fixed hundreds of these in Franklin, and most don’t need a whole new gate.
Pricing for Gate Parts & Welding in Franklin, OH
Here’s what we actually charge in Franklin, no ambiguity:
- Hinge replacement: $95-$240 per hinge set, including gate realignment
- Post replacement: $280-$620, including concrete removal and new footing
- Rail repair or splice: $150-$380, depending on rail length and section replacement
- Custom welding: $120 and up, quoted per job
- Gate operator retrofit: $450-$1,200, including welding a new operator mount
Every quote is agreed before work starts. If you’ve got a written estimate from another company, bring it to us and we’ll give you a free second opinion. Take $40 off any repair over $200, and seniors and veterans always get 10% off. Call (877) 610-2993 for a free estimate.
One thing worth knowing about Franklin specifically: the floodplain soils along the Great Miami make post work more common here than in the surrounding higher-ground communities. That’s not a sales line. It’s what our crew sees weekly in the 45005 ZIP. When we quote a post replacement in Franklin, we’re quoting based on what we know about Franklin soil, Franklin drainage, and Franklin winters. Not a generic chart from a corporate office.
We Also Serve Cities Near Franklin
Gatewood Fence & Gate works all over the Great Miami River valley. Beyond our regular Franklin calls, we handle gate repair and welding in Carlisle, Springboro, Middletown, and Germantown. If you live in one of those towns, same phone number, same pricing, same 90-Day Done Right Promise. Whether it’s a heaving post near the river or a rusted rail on an old chain-link gate, call us before you replace a gate that could be fixed.
Serving Franklin, OH - Our Local Coverage Area
We’re based in the Franklin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Franklin
The soil itself is the difference. Franklin sits in the Great Miami floodplain, where river-valley clay holds water through the winter. Mason and Lebanon sit on higher, better-draining ground, so their soil doesn’t expand and contract as violently with freeze-thaw cycles. In Franklin, saturated clay freezes, expands, and lifts posts upward a fraction of an inch each cycle. After a wet winter, posts can be two to four inches out of plumb. That’s why we set Franklin posts deeper with drainage stone and more concrete than we use for the same gate in a neighboring upland town. Call (877) 610-2993 and we’ll assess your post movement honestly.
Yes, if the frame and hinges are structurally sound. We regularly retrofit 1940s-1970s swing gates in Franklin with operators from Viking, Ghost Controls, DoorKing, and Elite. The key is the hinge post: if it’s rotted or heaved, we fix that first, because an operator on a misaligned gate burns out fast. We weld a proper operator mount, run the power, and program the safety sensors so the gate meets current standards. A retrofit in Franklin typically runs $450-$1,200, depending on the operator and the gate’s condition.
It depends on how much metal is left. If the rust is confined to the bottom rail and the rest of the frame is solid, welding in a splice or a new rail section is the cheaper fix, typically $150-$380. If the rust has spread into the hinge post or the gate’s frame rails, you’re looking at a bigger repair that may approach replacement cost. Our rule is simple: weld it if the structure is still sound, replace the rail if it’s not. Bring us a photo or call (877) 610-2993 and we’ll give you an honest read.
Yes. Ohio follows the UL 325 safety standard, which requires automatic gate operators to have entrapment protection: photo eyes, contact edges, or both, depending on the gate and operator. Gates installed before those standards existed often don’t have them. If we service your older operator, we’ll check the safety system and bring it current if it’s missing or failed. That’s not an upsell; it’s the law, and it’s also the difference between a gate that reverses when a child or a dog walks through and one that doesn’t.
The hinge post, almost always. A gate sags because the post it hangs from moves, not because the panel bends. In Franklin, saturated floodplain soils and freeze-thaw cycles heave posts out of plumb, which throws the hinges out of alignment and makes the gate drag. People sometimes weld gussets onto the panel or add a wheel to the latch side, but that treats the symptom. We fix the post first, re-plumb it, then re-hang the gate with fresh hinges. Call (877) 610-2993 and tell Hal what the gate is doing. If it’s dragging on one corner, he already knows where to look.
Call Gatewood Fence & Gate in Franklin
If your gate sags, drags, or won’t latch, call (877) 610-2993. A live person answers around the clock. We’ll ask what the gate is doing, tell you honestly what it likely needs, and quote you a price before we come out. No trip charge inside the county. The 90-Day Done Right Promise applies to every repair, every weld, every post we set in Franklin. If it’s not done right, we make it right. That’s the deal, and it’s been the deal since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Franklin and the Great Miami River valley since 2001.