Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Gallatin, TN
Gate repair in Gallatin typically costs $150-$1,150 depending on what’s broken, and most jobs are finished in a single visit. Hal Gatewood has been fixing gates since 2001, and when you call (877) 610-2993, a live person in Tennessee answers - no voicemail, no call queue. We repair gates where they stand, including on-site welding, and every job carries our 90-Day Done Right Promise in writing.
Gallatin’s dual market of new gated HOA subdivisions along Highway 31E and Long Hollow Pike, plus private lakefront estates around Old Hickory Lake, means we see everything from fried control boards in brand-new automated systems to rotted hinge posts on wood gates near the historic square. The humid summers and hard-hitting ice storms here create problems you won’t find in flatter, drier neighbors like Lebanon or Springfield.
Why Gallatin Homes Are Different
Gallatin sits in Sumner County’s humid subtropical zone, and that moisture works on gates year-round. July and August stay wet enough to accelerate rust on steel hinges and warp wooden frames, especially on older in-town parcels near the square where manual hardware has been in place for decades. We see it every August: a wooden gate that scraped in May is fully stuck by Labor Day.
But the bigger issue is what Middle Tennessee ice storms do to automated gates. Sumner County gets hit harder than Nashville because of elevation variation along the ridges. When ice coats a track or an opener arm, forcing the motor to break it burns the windings out fast. That’s a repair call we get all winter across Gallatin’s subdivisions.
The spring thunderstorm surge problem is equally distinctive. Gallatin’s dense wave of new gated HOA subdivisions means thousands of control boards and keypads are connected to the grid with minimal surge protection. When intense spring storms roll through, we replace more boards here than in older, manually-operated neighborhoods in surrounding Sumner County towns. The housing stock tells the story: 2000s-2020s master-planned subdivision homes with ornamental aluminum or steel automated gates dominate, while older in-town parcels cling to simpler wood or chain-link with manual hardware that corrodes fast.
Gate Repair in Gallatin
Gate repair in Gallatin usually comes down to one of three things: a motor that stopped responding, a gate that drags or binds, or a hinge post that has given up. Most jobs we see across the 37066 corridor are done in a single visit, with the gate working again before we pull out of the driveway. Hal’s repair-first philosophy means we weld and fix what’s there rather than hauling your gate off to a shop somewhere else.
We serve all of Gallatin’s 37066 ZIP, from lakefront properties around Old Hickory Lake to the newer subdivisions off Long Hollow Pike and Highway 31E, and we show up ready to work. Gate Repair is what we’ve built this business on since 2001.
Gate Realignment
Most gate dragging problems in Gallatin start at the hinge post, not in the middle of the panel. On shared driveway gates along Old Hickory Lake, a realigned gate can bind again the first wet spring if the post itself is moving in the soil. We check the post, the hinge barrels, and the ground before we adjust anything. A simple gate realignment on a manual swing gate in Gallatin typically costs $150 to $300, and we quote that price before touching a wrench.
Hinge & Post Repair
Older in-town wood gates near the Gallatin square rot at the hinge post where sprinkler overspray keeps the grain damp. You can bolt on new hinges there, but the wood around the lag screws is what fails. We replace the post or sleeve it with steel and then rehang the gate. Hinge repair that requires welding a new hinge barrel or replacing a rotted wood post runs $250 to $550 in Gallatin. On ornamental steel and aluminum gates in newer subdivisions, we repair cracked welds on site, which means your gate never leaves your driveway.
Electric Gate Repair
Gallatin’s new subdivisions are full of automated gate systems that were installed on the cheap. Control boards and keypads get fried by lightning strikes out on Long Hollow Pike because the security wiring runs without surge protection at the post. We replace boards, reset loop detectors, and wire in proper surge protection so the next storm does not take the opener with it. Electric gate board replacement in Gallatin, including a new surge protector, lands between $280 and $520 depending on the board model. A motor that burned out trying to break ice is a repair, and the repair is usually less than the replacement.
Automatic Gate Repair
Slide gates are common on Gallatin properties where a swing gate won’t fit between the driveway and the property line. When a slide gate shears its rack and pinion, the motor usually overheated first. We replace the gear rack, verify the motor is sized for the panel that’s actually on the gate, and adjust the loop detector sensitivity for the driveway apron. A burned-out motor and gear rack on a slide gate in Gallatin typically costs $650 to $1,150. On shared drives, we stage the work so every household keeps moving while the gate is down.
Why does my swing gate keep dragging on the driveway in Gallatin - is it the hinges?
Usually not the hinges themselves. The hinge post is what moved. Gallatin’s humid summers and heavy clay around the 37066 corridor soften the ground around the post base, and the hinge barrel seats wear out. Fix the panel without the post and you’ll fix it twice. We check the post first, every time. Call (877) 610-2993 for an exact quote - estimates are free.
Can you repair my manual chain-link gate near downtown Gallatin, or do I need to convert to automatic?
We will repair what you have. Older in-town parcels near the historic Gallatin square tend toward simpler wood or chain-link gates with manual hardware that corrodes in the humid air. We replace hinge pins, weld sagging corners, and straighten shifted posts. A manual gate can last decades with honest maintenance. Call (877) 610-2993 and we’ll tell you what it needs.
Gate Installation in Gallatin
Gate installation in Gallatin typically runs $2,800 to $7,500 for a standard automated driveway gate, with custom ornamental steel work on Old Hickory Lake estates reaching higher. Most single and double swing gate installs take one to two days on site once the gate is fabricated or ordered. We handle everything from the first measurement to the final safety check, and every quote is agreed in writing before any work begins.
The concentration of new automated systems in Gallatin’s subdivisions means we pay special attention to surge protection and proper entrapment devices from day one. Gate Installation is scheduled work, measured and ordered - not a same-day rush job.
Driveway Gate Installation
Most Gallatin driveway gates we install are either single-leaf swing gates on ornamental aluminum or steel, or slide gates for homes where the driveway slope or setback makes swinging impractical. On the new subdivisions off Highway 31E, we see a lot of builders’ issue gates that were hung fast and never tuned. We replace those with properly set posts and operators sized for the actual gate weight. A single swing gate, ornamental aluminum or steel, with automated opener, runs $2,800-$4,500 in Gallatin.
Slide Gate Installation
Sliding gates are a strong choice for Gallatin driveways with a slope or short setback, because you don’t need the clearance arc of a swing. We install cantilever and track-style slide gates, and we’re picky about the track. Gallatin’s ice storms freeze exposed tracks solid, and a gate forced to break ice burns out motors fast. Where track exposure is a problem, we recommend cantilever designs that ride above the ground. A slide gate, track or cantilever, automated, typically costs $4,500-$8,000.
Custom Estate Gates
On Old Hickory Lake properties, we fabricate and finish custom ornamental steel gates in-house, matching existing ironwork patterns and powder-coat colors. Last spring our crew set two custom powder-coated steel swing gates on the lake, each leaf over 14 feet. The hinge posts were drilled and set 42 inches deep in Gallatin’s clay loam with full concrete footings. Custom fabricated ornamental steel estate gates in the Gallatin area run $9,000-$18,000 depending on size, finish, and access control.
How deep should gate posts be set in Gallatin’s soil to prevent sagging?
For automated swing gates in Gallatin’s clay loam, hinge posts should be set 36 to 42 inches deep in a full concrete footing sized to the gate weight. A 900-pound double-leaf gate needs the full 42 inches. Builder-grade posts set at 24 inches will lean as the clay shifts through wet and dry seasons. We set posts deeper than code because a gate sags in the hinge post, not in the middle. Call (877) 610-2993 for a free measure and written quote.
What does a full gate installation include?
Everything from post setting to final safety check: measurement, fabrication or ordering, concrete footing work, hinge welding, operator mounting, loop detector or safety edge installation, access control wiring, and UL 325 entrapment protection testing. We handle permit paperwork where required and HOA approval submittals for Gallatin’s newer subdivisions. The price is quoted and agreed in writing before we order material or break ground.
Gate Motor & Opener in Gallatin
When a gate motor quits in Gallatin, you notice fast - especially if you live in one of the newer gated HOA subdivisions off Highway 31E or Long Hollow Pike, or on a lakefront place on Old Hickory Lake where the gate is the only thing between your driveway and whoever pulls off the road. We’re Gatewood Fence & Gate, and Hal Gatewood owns the shop, answers the phone when you call, and shows up himself or sends the crew he’s trained.
Most Gallatin gate motor failures we see are repairable. A control board fried by a spring thunderstorm surge doesn’t mean you need a whole new opener. Gate Motor & Opener service is what we do every day.
Motor Repair
A control board fried by a spring thunderstorm surge doesn’t mean you need a whole new opener - it means you need a board, which we stock for the brands we service. A motor that groans and shuts off halfway through its travel might have a seized bearing or a stripped gear, and we fix those too, right in your driveway. In Gallatin, a typical gate motor repair runs $180 to $390 depending on the part and labor. Hal’s philosophy is plain: fix what’s broken, don’t replace what isn’t.
Control Board Replacement
Gallatin’s new gated subdivisions along Highway 31E have openers so new that their control boards are still finding their first lightning season. A surge hits, the board dies, and the gate won’t open from any remote or keypad. We replace boards regularly, and in this part of Sumner County, it’s often the number one repair call after a storm. A control board replacement in Gallatin usually lands in the $220 to $340 range.
Slide Motor Service
Slide gates are everywhere in Gallatin’s new gated subdivisions, and the motors that drive them have particular problems in Middle Tennessee. Ice storms hit Sumner County harder than Nashville because of elevation change, and a slide gate track full of ice will burn up a motor that tries to force the gate through it. We see bent racks, seized rollers, and stripped drive gears all year round. Rust repairing a slide track or replacing rollers is generally $120 to $250. A new slide motor installation starts around $600 and can go past $1,800 for a heavy estate swing gate with battery backup and intercom integration.
Why did my gate opener stop working after a spring thunderstorm in Gallatin?
A direct lightning strike is rare; a power surge riding the line into your control board is common - especially in Gallatin’s new subdivisions where the boards haven’t been hardened by a few seasons of Middle Tennessee weather. Surges fry the board or the transformer, and the opener goes dead even though the motor itself is fine. We replace the board, test the motor, and wire in proper surge protection. Call (877) 610-2993 for a free estimate.
Does my Gallatin HOA require architectural approval before replacing a gate motor?
In most of Gallatin’s newer gated subdivisions, yes - the HOA’s architectural standards usually cover the motor housing finish, and sometimes the mounting pad or post color. It’s not a roadblock, just paperwork. We handle the approval submittal for you, including finish specs, before the crew starts. That’s standard practice on HOA gate work along Highway 31E and Long Hollow Pike. Call (877) 610-2993 and we’ll walk you through it.
Gate Access Control in Gallatin
Gate access control in Gallatin means keypads, remotes, phone entry, card readers, and video intercoms that actually work when you pull up to the gate. Most of our Gallatin calls come down to three things: a control board fried by a spring storm, a keypad that quit after rain, or a new video intercom somebody wired wrong. We answer the phone live at (877) 610-2993 any hour, and we’ll give you an honest read on whether that board needs replacement or just a reset.
The wiring mistakes in newer Gallatin subdivisions are a particular specialty of ours - low-voltage lines pulled too close to line voltage cause phantom opens and random resets that baffle less experienced techs. Gate Access Control is more than punching in a code; it’s getting the wiring right so the system stays reliable.
Keypad Entry
New Gallatin subdivisions lean hard on keypad entry, especially HOAs where a dozen contractors and residents share a code. We install and service keypads built for rain and heat, not the cheap ones that fog up from the inside. If your keypad works until a thunderstorm rolls through and then goes dark, that’s usually a surge or a poor ground. A keypad entry replacement in Gallatin typically runs $180-$300 including the part for most Viking or Ghost Controls systems.
Remote Control & Receiver
Remote control entry should be boring. Press a button, gate opens. When it isn’t boring, it’s usually a failing receiver board, a remote that lost its programming after a power blink, or a home with seven remotes and only four that work. We pair remotes, replace receivers, and program Homelink in your car. A remote control receiver board swap in Gallatin lands between $220-$380.
Phone & Video Entry
Phone entry systems let you buzz somebody in from the house or from your pocket. Around Old Hickory Lake, we see estate owners who want a gate that rings their phone before it opens. That’s a simple cellular or VoIP phone entry module, but it has to be wired right or it’ll ring six times and drop. Full video intercom setups with a post-mount camera and inside monitor run $900-$1,600 on Gallatin estate gates. We mount, wire the relay correctly, and test with your actual phone before we leave.
Why does my Gallatin gate keypad stop working after every big spring storm?
Spring thunderstorms in Gallatin send power surges through low-voltage access wiring, and the keypad’s internal board or the main control board takes the hit. The fix is usually a surge-damaged component replacement and a proper ground. We can tell you what died in about ten minutes on site. Call (877) 610-2993 and we’ll give you an exact quote - estimates are free.
Can I add a video intercom to my existing Gallatin subdivision gate?
Usually yes. If your gate already has a keypad or phone entry, we can wire a video intercom into the existing control board. The catch is wiring quality, and in Gallatin’s newer subdivisions we sometimes have to re-run low-voltage lines that were pulled too close to line voltage. Call (877) 610-2993 for a free on-site read and written quote.
Gate Parts & Welding in Gallatin
Gate parts and welding in Gallatin usually means one of two jobs: a hinge that finally gave out on a subdivision gate off Long Hollow Pike, or an estate gate near Old Hickory Lake that needs a custom weld rather than a full replacement. We handle both. Hal Gatewood has been repairing gates in Tennessee since 2001, and when you call (877) 610-2993, you won’t get a voicemail or a call center. You’ll get a live person who can tell you when Hal or his crew can be there.
On-site welding means your gate stays in your driveway. We don’t haul it off to some shop in Nashville. Gate Parts & Welding is where our repair-first philosophy shows most clearly.
Hinge Replacement
Most gate failures in Gallatin start at the hinge. The humid summers along the Cumberland River basin accelerate rust on steel hinge hardware, and once a hinge starts to go, the gate twists and stresses the post. For gates in newer subdivisions off Long Hollow Pike, we see lots of ornamental aluminum hinges that look fine on the outside but are powder-coated over corrosion. Hinge replacement runs $180-$320 for a standard single swing gate in Gallatin, depending on whether the hinges are bolt-on or need welding.
Post Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. Gallatin’s clay-heavy soil shifts with the seasons, and a post that was plumb five years ago might now be leaning enough to bind the gate. We dig out the old post, set a new one in concrete, and weld the hinges back on. Post replacement is the bigger job: $450-$850 for a residential post in Gallatin, including concrete and re-welding the hardware.
Custom Welding & Rail Repair
Not every gate problem has an off-the-shelf fix. When a gate has a break in an unusual spot, or when a homeowner wants a specific latch mount or reinforcement, we weld it right in the driveway. For Gallatin’s older homes near the historic square, this often means patching and reinforcing wood-framed gates with steel rather than trying to find a matching replacement part that doesn’t exist anymore. Rail repair runs $150-$400 depending on whether we’re straightening a bent rail or welding a full crack. Custom welding jobs start around $120 for small brackets and run up to $600 for significant fabrication work.
Do you offer emergency gate welding in Gallatin?
Yes. If your gate is off its hinges or a weld has failed and you can’t secure your property, call us. A live person answers 24/7 at (877) 610-2993. We’ll tell you if we can get someone out today or first thing tomorrow morning, and we’ll quote the price before any work starts.
Is there a warranty on welding and parts in Gallatin?
Every job carries our 90-Day Done Right Promise in writing. If something isn’t done right, one call brings Hal back. No runaround, no dispatch queue, no passing you between departments. The name is on the shop, and the shop is down the road - that is the oldest accountability there is. Call (877) 610-2993 for details.
Brands We Service in Gallatin
We stock parts locally and are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means most Gallatin repairs need one trip, not a week waiting on a box from somewhere else. our brands page has the full list.
Pricing for Gate Repair in Gallatin, TN
| Service | Typical range in Gallatin |
|---|---|
| Gate realignment (manual swing) | $150 - $300 |
| Hinge & post repair | $250 - $550 |
| Electric gate board replacement (with surge protector) | $280 - $520 |
| Slide gate motor & gear rack replacement | $650 - $1,150 |
| Gate motor repair (general) | $180 - $390 |
| Control board replacement | $220 - $340 |
| Slide track rust repair / roller replacement | $120 - $250 |
| New slide motor installation | $600 - $1,800 |
| Keypad entry replacement | $180 - $300 |
| Remote receiver board swap | $220 - $380 |
| Video intercom (estate gate) | $900 - $1,600 |
| Hinge replacement (single swing) | $180 - $320 |
| Post replacement (residential) | $450 - $850 |
| Rail repair / welding | $150 - $400 |
| Custom welding (small brackets to fabrication) | $120 - $600 |
What pushes price up in Gallatin: heavy ornamental steel panels requiring deeper footings, custom powder-coat matching for HOA standards, and surge-damage repairs where multiple components need replacement. What keeps price down: fixing what’s actually broken rather than replacing whole systems, and our standing $40 off any repair over $200. Every price is quoted and agreed before any work starts - you’ll never get a call about an invoice that changed at the door.
Neighborhoods We Serve in Gallatin
We cover all of Gallatin’s 37066 ZIP, with typical same-day response for repair calls and often within a few hours for emergencies. Here are areas where we do regular work:
- Subdivisions along Long Hollow Pike
- Communities off Highway 31E
- Lakefront properties around Old Hickory Lake
- Homes near the historic square
- Newer HOA developments throughout 37066
Service Area - Cities Near Gallatin
We dispatch and schedule from our Memphis office, with crews serving Gallatin locally every day. Our regular service area also includes Hendersonville, TN, Green Hill, TN, White House, TN, Mount Juliet, TN, and Goodlettsville, TN. No trip charge inside the county.
Serving Gallatin, TN - Our Local Coverage Area
Gatewood Fence & Gate crews serve Gallatin and the communities around it; dispatch is coordinated from our Memphis office. The map shows the Gallatin coverage area; if your address is on it, we can help.
Also serving nearby: Gallatin, TN, Hendersonville, TN, Green Hill, TN, White House, TN, Mount Juliet, TN, Goodlettsville, TN.
FAQs About Gate Repair in Gallatin
In most cases, we can have someone to your Gallatin property within 24 to 48 hours. Emergency calls, like a gate stuck open overnight, get priority. Call (877) 610-2993 and a live person will tell you exactly when to expect us - no voicemail, no callback queue.
For most residential gate repairs in Gallatin, no permit is required. New installations and any work that modifies the driveway entrance or adds electrical service may need a Sumner County permit, and we handle that paperwork as part of the job. HOA approval is separate - many Gallatin subdivisions require architectural review, and we submit those docs for you before work starts.
Yes. We serve all of Gallatin’s 37066 ZIP, from the newer subdivisions off Long Hollow Pike and Highway 31E to the lakefront properties around Old Hickory Lake and the older neighborhoods near the historic square. No trip charge inside the county. Call (877) 610-2993 for a free estimate.
Ready to get your gate working right? Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate. Hal or a live person will answer, day or night, and we’ll quote your price upfront before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gallatin Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond