Gate Installation in Venice - Written Price, Install Date Set

Fast, Reliable Gate Installation Across Venice

A new gate in Venice generally runs from $3,800 to $14,000 installed, depending on size, material, and whether you need automation. Most jobs take one to three days once materials arrive. Our crews work Venice every week, and a live person answers the phone at (877) 610-2993 around the clock.

We know what salt air does to a gate on a canal-facing lot off Dell Avenue, and we know what holds up. That’s the difference between a gate you replace in three years and one you stop thinking about. Hal Gatewood has been at this since 2001, and the name’s on the shop, not a marketing deck.

Why Gatewood Fence & Gate Is Venice’s Preferred Gate Installation Company

We’re a local, owner-operated shop, and Venice is one of the neighborhoods we serve most. Homeowners here have called us for everything from a rotted wood pedestrian gate on a 1920s Abbot Kinney-era bungalow to a fully automated sliding driveway gate on a modern teardown rebuild. We’ve seen what the marine layer does to hardware that other companies install without a second thought.

Hal Gatewood runs the crew himself. You won’t get a rotating cast of subcontractors. The person who gives you the quote is the person who’ll be in your driveway, and if something’s off after the job, one call brings him back. That’s the 90-Day Done Right Promise, in writing, on every single job. Not a verbal assurance. Not fine print.

Our Venice customers also like that we answer the phone. A real person picks up, 24/7. Not a voicemail tree. Whether it’s a gate that won’t close at 10 p.m. or a hinge that’s suddenly squealing in the salt air, you get a human being who knows gates.

We stock parts locally for Venice jobs, which means faster turnaround on operators, hinges, and hardware. We don’t need to order standard components from a warehouse across the country. We service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry the stainless and marine-grade fasteners that actually make sense for 90291 and 90294.

Our Gate Installation Services in Venice

Gate Installation covers a lot of ground, so here’s what we handle most often in Venice.

Driveway Gates

Venice driveways are tight. Many homes have narrow setbacks, alleys, or zero lot lines. A driveway gate here needs careful measuring before fabrication, not a template job. We build and install driveway gates that clear your property line, allow for pedestrian access, and hold up to the salt air. Typical installed cost for a single driveway gate in Venice runs $4,800 to $12,000, with automation adding $1,800 to $3,500 depending on the operator.

Pedestrian Gates

Pedestrian gates in Venice see a lot of what the coast throws at them: salt spray, damp mornings, direct sun. The older bungalows often still have ornamental wrought iron gates from the 1920s and 1930s. Many are rusted through at the bottom rail or missing matching hardware. We fabricate replacement pedestrian gates in Venice from marine-grade stainless or powder-coated aluminum, matched to the character of the home. Budget $2,500 to $5,500 for a new pedestrian gate installed.

Sliding Gates

Sliding gates work well on Venice lots where a swing gate would eat the entire driveway’s clearance. They’re also common on the newer modern builds. But the track and rollers are the first thing to fail in this climate: salt and sand grind them down, and the rollers seize. We install sliding gates with heavy-duty marine-grade track systems and sealed bearing rollers, which means they keep moving instead of hanging up. A sliding gate in Venice typically runs $5,500 to $14,000 including automation, depending on width and material.

Swing Gates

Swing gates are the classic Venice choice for older homes and pedestrian entries. The problem here is the hinge post. Salt air attacks the post, the hinges, and the welds, and a gate that was plumb at install starts sagging. We set swing gate hinge posts with epoxy-coated rebar and use marine-grade stainless hinges from day one. A swing gate installed in Venice runs $3,800 to $9,500, with automation extra.

Security Gates

A security gate on a Venice property does double duty: it’s access control and it’s a statement. We install security gates with options like keypad entry, intercom, and remote access tied to your phone. In a neighborhood where foot traffic is constant and the boardwalk is around the corner, a security gate isn’t a luxury. It’s a boundary. Expect $6,000 to $15,000 for a security gate with automation, depending on size and access control features.

Trusted Brands We Service in Venice

We’re certified to service and install operators from Linear, Viking, Ghost Controls, and DoorKing, along with five other major brands. For Venice homes we lean on these brands because their control boards and housings tend to seal better against salt-laden fog. We also keep common Venice-specific parts in stock: marine-grade stainless hinges, powder-coated aluminum gate frames, and sealed operator housings. That means when we quote a job, we can often start it the same week instead of waiting on a slow order.

Common Gate Installation Problems We See in Venice Homes

Here’s what we find again and again on Venice jobs, from the Canals to the numbered streets:

• Zinc-plated hardware that rots from the inside out. Standard zinc hinges and strike plates that would last a decade in Culver City seize up in two to three years in Venice. The salt spray gets into every threaded hole and crevice.
• Bottom rails rusting through on steel gates. Canal-adjacent properties add ground-level moisture to the salt air. That combination eats the bottom rail of a steel gate faster than the rest of it. Powder-coated steel also develops filiform corrosion under any scratch near the hinge post.
• Operator control boards failing intermittently. Salt-laden fog seeps into poorly sealed housings and corrodes the board. The gate works fine one morning and won’t respond the next. We replace failed boards with sealed, marine-rated alternatives.
• Swing posts set without marine-grade treatment. A gate sags in the hinge post, not in the middle. Posts set in Venice without epoxy-coated rebar and proper drainage start leaning within a few years, and the gate goes with them.

Pricing for Gate Installation in Venice, CA

We Also Serve Cities Near Venice

If you’re in Santa Monica, Culver City, Ladera Heights, or Century City, we serve those neighborhoods too. The same crew, the same written promise, the same live answer when you call. The coastal conditions don’t stop at the Venice border, and neither do we.

FAQs - Gate Installation in Venice

Why does a new gate in Venice need marine-grade hardware when the same gate would be fine in Mar Vista or Culver City?

Salt-laden air is the difference. Venice sits directly on the Pacific, and the Canals Historic District adds ground-level humidity that inland neighborhoods don’t have. Standard zinc-plated hardware that lasts ten-plus years in Mar Vista fails in two to three years in Venice. We specify marine-grade stainless hinges, strike plates, and fasteners on Venice jobs because they’re the only spec that survives this environment. Skip that and you’ll pay for the same gate twice. Call (877) 610-2993 and we’ll walk you through the right spec for your street.

Can I install a wooden gate on a canal-facing property in the Venice Canals Historic District?

Yes, but the wood choice and hardware matter more than they would anywhere else. Cedar and ipe hold up best to the brackish air, while pine will rot at the bottom rail within a few years. The hinges and fasteners must be marine-grade stainless. We’ve replaced enough canal-facing wooden gates to know which materials survive and which ones don’t. The Historic District also has design review requirements, so we’ll help you understand that process before any fabrication starts.

What’s the correct hinge post treatment for a swing gate near the Venice boardwalk?

Near the boardwalk, the hinge post gets the worst of the salt spray and wind. We set swing gate hinge posts in a concrete footing with epoxy-coated rebar, then wrap the post base in a marine-grade seal. The hinges themselves are stainless, never zinc. A properly set marine-grade post will outlast the gate itself. If you have a gate that’s leaning or sagging near the boardwalk, call (877) 610-2993 for a free evaluation.

Are automatic gate operators required to have safety photocells in Venice?

Yes. UL 325 safety standards require photocells and contact sensors on any automated gate, and that federal requirement applies everywhere in Venice, from the Canals to the Walk Streets. We install photocells on every automated gate job without exception. A gate operator without working safety edges can cause serious injury, and it’s not worth the risk. If you’re unsure whether your current gate meets the standard, we’ll check it when we come out.

Do I need a permit to replace a gate on a Venice bungalow with zero setback to the sidewalk?

Most gate replacements in Venice don’t require a permit, but there are exceptions. If your gate swings over a public sidewalk or you’re adding a new gate where none existed, city setback rules apply, and a permit may be needed. Zero-setback bungalows are common in Venice’s older districts, so we look at the property line before we quote. We’ll tell you honestly whether a permit is needed and help you handle it. Call (877) 610-2993 and we’ll sort out the details before you spend a dollar.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Venice since 2001.