Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Hull, MA
If your gate is dragging, sagging, or refusing to open on a February morning in Hull, you’re not alone. Gate repair in Hull typically costs $180-$340 for hinge and post work, or $220-$600 for electric gate repairs, and most jobs are completed same day. The salt air here works on gate hardware the way it works on everything else in Hull: constantly and without mercy. We answer the phone at (877) 610-2993 with a real person, day or night, and we’ll give you a straight read on what’s wrong before we ever roll a truck down Nantasket Avenue.
Why Hull Homes Are Different
Hull is a narrow ocean peninsula nearly surrounded by saltwater on three sides - Boston Harbor, Hull Bay, and Massachusetts Bay - making it one of the most salt-corrosive environments in the entire Boston metro area. Gates here face relentless salt spray year-round, not just during storms, meaning ferrous metal components corrode dramatically faster than on the mainland.
Much of Hull’s housing stock consists of old summer cottages from the early-to-mid 20th century converted to year-round residences, plus Victorian-era homes near Nantasket Beach. These older gate installations frequently have undersized or untreated steel posts set directly in sandy, salt-saturated soil, leading to accelerated base rot and heaving. Frost heave in the sandy coastal soil also routinely shifts gate posts out of alignment over winter, making post resetting and rehinging a high-demand service every spring.
We work across the whole peninsula, from Nantasket Beach and the streets running off Nantasket Avenue, to Allerton and the lanes between Main Street and Hull Bay, to Waveland and the corner lots near Rockland Circle. Response times across Hull are about the same whether you’re beachside or bayside - it’s a small town geographically, and we know the shortcuts.
Gate Repair in Hull
Gate repair in Hull comes down to one question: can the hardware survive this peninsula? We’ve been fixing gates here long enough to know the answer is only yes when the right materials go in the first time. Hal Gatewood runs Gatewood Fence & Gate, and our crew handles electric gate repair, automatic gate repair, hinge and post work, and weld and rust repair across Hull.
Electric Gate Repair
Electric gates in Hull punish neglected wiring and poorly sealed housings. Salt air creeps into operator boards, photoelectric eyes, and wire nuts, corroding contacts until the gate stops responding to the remote or the keypad. We test the full circuit, from the power feed to the loop detector, before swapping parts that don’t need swapping. Electric gate repair in Hull, including board replacement, ranges from $220 to $600 depending on the brand and the damage. Most electric gate repair in Hull is completed the same day, provided the part is on the truck. We stock boards, receivers, and safety edges for the brands we service.
Automatic Gate Repair
An automatic swing gate near the ocean faces a double load: corrosion and constant wind pressure. A 30 mph nor’easter gust slamming against an eight-foot gate panel stresses the operator arm, hinge pins, and the post itself. We see operators burning out because the gate was never rebalanced after the post shifted. On a Hull job, automatic gate repair starts with checking whether the gate still swings freely by hand. If not, we align and repair the mechanicals before we touch the motor. Otherwise you’ll rebuild the operator and kill the new one too. Hinge and post repair in Hull typically runs $180 to $340, depending on whether we reset an existing post or cut out a rusted one and set a new galvanized post.
Hinge & Post Repair
In Hull, hinge and post repair is the foundation of every other fix. The steel post set in sandy, salt-saturated soil rots at the base, frost heave shifts it over winter, and the whole gate sags. We cut out the bad post, set a galvanized replacement in proper concrete, and rehang the gate on stainless steel hinges. On one repair call near Nantasket Beach, our tech found a LiftMaster swing gate operator on a cottage gate with the hinge post rusted through at the base, the post footing buried with no concrete collar at all. Gate realignment is usually $150 to $275 when posts remain structurally sound. A gate that sags in the hinge post, not in the middle, won’t heal itself. We fix the post, not just the panel. Gate Repair is what we do, and we do it in your driveway.
Why do gate hinges in Hull seize up so much faster than in neighboring towns like Weymouth or Hingham?
Because Hull is a peninsula with saltwater on three sides and no inland buffer, wind-driven salt spray coats the hinges continuously. Steel hinge pins and barrels in Hull rust and bind within three to five years, while the same hardware in Weymouth or Hingham typically lasts 12 to 15 years. Any gate repair in Hull should start with a hinge inspection. Call (877) 610-2993 for an exact quote - estimates are free.
Can a rusty steel gate post in Hull be repaired, or does it always need replacement?
It depends on how deep the rust goes, and we’ll tell you straight without selling you a job you don’t need. Surface rust can be ground down and treated. A post rusted through the wall less than 25 percent can often be sleeved and reinforced. But a post rusted through the base, especially one set in sandy Hull soil with no concrete footing, needs replacement. We’ll show you the rot, explain both options, and quote before any work begins. Call (877) 610-2993 for an exact quote - estimates are free.
Gate Installation in Hull
Gate installation in Hull is different from gate installation anywhere else in the South Shore. A narrow ocean peninsula with saltwater on three sides means every hinge, post, and control board takes a beating that inland towns never see. We quote a real number up front, we show up when we say we will, and the work is done by people who know Hull’s streets, soil, and salt air.
Driveway Gate
A driveway gate in Hull has to handle two things at once: the salt that eats every ferrous part and the sandy soil that shifts under the posts. We set posts deeper than code minimums in concrete footings sized for coastal conditions, and we use hardware that will not seize in three years. A driveway gate here is also your first line of property security, and plenty of the old ones we see were never installed with that in mind. A single driveway swing gate runs $3,200-$7,000, and a double driveway gate runs $6,000-$12,000 when you include operator, posts, and concrete work.
Swing Gate
Swing gates are the most common gate on Hull’s side streets and beach roads, and they are also the most vulnerable to post heave. A gate sags in the hinge post, not in the middle, and that is where we start. When we install a swing gate in Hull, we are thinking about how it will behave after three winters of frost heave and six nor’easters. That changes how we set the posts and what we hang on them. A typical pedestrian gate installation in Hull runs $900-$2,400, depending on material and hardware.
Pedestrian Gate
Pedestrian gates near the water fail at the latch and hinge hardware first. We install pedestrian gates in Hull with stainless steel or powder-coated hardware as the default, because standard galvanized hardware seizes solid from wind-driven salt spray often within three years. If you walk through a gate every day, it needs to open smoothly in January and July alike. The price you are quoted is the price you pay. It is agreed before any work starts, and it does not change at the door. You will also catch these standing offers: $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Gate Installation in Hull means building for the peninsula, not just the property.
Why do gate posts in Hull heave and shift every winter?
Hull’s sandy coastal soil takes the full brunt of nor’easters with no inland buffer, and frost heave pushes posts out of alignment each winter. Posts set shallow or without proper concrete footings shift noticeably within two or three seasons, causing the gate to sag, bind, and refuse to latch. The fix is resetting the posts in deeper, properly sized concrete footings designed for coastal ground. Call (877) 610-2993 for an exact quote - estimates are free.
Can I keep my existing ornamental iron gate from a 1920s cottage, or do I need to replace it?
It depends on the condition of the iron and, more importantly, the posts. Many of the older ornamental gates around Nantasket Beach and the Victorian homes near Hull Bay are beautiful, and if the wrought work is sound, we can often restore and rehang it on new posts. If the posts are undersized steel set directly in salt-saturated soil, they have likely rotted at the base, and any attempt to rehang the gate on them will fail again. Call (877) 610-2993 for an exact quote - estimates are free.
Gate Motor & Opener in Hull
A dead gate motor in Hull usually announces itself at the worst possible moment: a nor’easter rolling up Massachusetts Bay, or a Monday morning when the driveway is the only thing between you and the ferry schedule. When your opener quits, you don’t need a scripted phone menu. You need a person who knows Hull’s oceanfront peninsula and has probably driven past your street a hundred times. Gatewood Fence & Gate answers the phone with a live person around the clock.
Motor Installation
A new gate motor in Hull should be sized for wind load and built for salt. Most stock openers aren’t. We install motors for swing and slide gates, and we’ll tell you straight if your existing gate is too heavy for the opener you priced online. Installation includes the motor, mounting, wiring, and testing. A full motor replacement with installation usually lands between $850 and $1,750 depending on the motor type and gate size. We quote the full price before we start, so there’s no surprise line item at the door.
Motor Repair
A clicking relay, a humming motor that won’t move, a gate that reverses for no reason. These are the calls we get from Hull all year. Repair starts with testing the motor, the capacitor, the limit switches, and the board. We replace brass and stainless hardware where the old zinc stuff has rusted solid. A gate motor repair in Hull typically runs $180 to $340. Most motor repairs in Hull are done same day, especially when it’s an emergency call with a gate stuck closed or open.
Linear & Slide Motors
Linear gate motors operate on a straight drive mechanism, and they’re common on slide gates along Hull’s waterfront properties. When a linear motor binds or whines, it’s often because the drive chain or belt has been bathed in salt air. We service Linear brand motors, along with other slide and swing operators. If the arm itself is corroded, we can often weld or replace just that component instead of buying a whole new operator. A linear motor replacement is in the middle of that $850-$1,750 range, while a slide motor with rail work can push toward the top. Slide gates are the smart choice for many Hull driveways where snow and sand build up, but the motor and rail need to survive the constant salt coating that rolls up off Boston Harbor. Gate Motor & Opener service in Hull means fixing what salt broke.
How fast can you get to Hull for a gate motor emergency?
We answer the phone around the clock, and for a gate stuck closed or stuck open, we can usually get to most Hull neighborhoods within a couple of hours of the first call. Hull is a small town geographically, so once we’re over the bridge or up from Nantasket, we’re never far. Call (877) 610-2993 and you’ll talk to a person who can give you a real arrival window, not a dispatch queue.
How much does gate motor repair cost in Hull?
A typical repair in Hull runs $180 to $340, and that includes the diagnosis, the parts, and the labor. Full motor replacements are more, but you’ll know the number before the work starts. Estimates are free. Call (877) 610-2993 for an exact quote.
Gate Access Control in Hull
Gate access control in Hull means dealing with salt air that eats standard hardware in a few seasons. A keypad, card reader, or phone entry system that works flawlessly in Hingham will corrode and fail here unless it’s spec’d for a peninsula with ocean on three sides. We’ve been fixing and installing gate access systems since 2001, and our work starts with one question: what material is this hardware actually made of?
Keypad Entry
Keypad entry is the most common access control we install in Hull, and also the one that fails fastest when spec’d wrong. The problem isn’t the keypad brain; it’s the terminals and internal contacts. Wind-driven salt spray from Hull Bay and Massachusetts Bay coats the circuit board, bridges connections, and causes intermittent “no entry” faults within a single season. We use sealed, marine-rated keypads with silicone-gasketed enclosures and stainless hardware. A basic residential keypad install in Hull runs $450 to $1,200 depending on wiring distance and whether we’re integrating with an existing operator.
Video Intercom
Video intercom is increasingly popular on Hull’s waterfront properties because you can see who’s at the gate before buzzing them in, from anywhere. The catch here is lens fogging and salt film building up on the camera face. We install units with heated lens housings and anti-corrosion coatings, and we place them so the prevailing wind doesn’t drive spray directly into the mic and speaker ports. Expect $800 to $2,400 for a single-gate video intercom in Hull, including wiring and app setup.
Phone & Card Entry
Phone entry systems let you buzz the gate open from your cell phone, either through a cellular module or by routing calls through a landline. On Hull’s peninsula, cellular-based phone entry has a real advantage: no physical keypad or card reader exposed to salt spray at all. The downside is signal strength near the water, especially on the bayside streets where the hills and the bay can bounce signals. We test signal at the gate location before we quote. Phone entry installs run $700 to $1,800. Adding a single card reader to an existing operator runs $350 to $900, including programming. Gate Access Control in Hull starts with the right hardware for salt air.
Why does my swing gate operator reverse every time it tries to close near the water?
The most common cause on Hull waterfront properties is salt buildup on the safety photocell lenses, which makes the operator think something is blocking the gate’s path. The salt film bridges the beam and triggers a false obstruction signal, so the gate reverses or refuses to close on clear days. Cleaning the lenses may fix it temporarily, but the permanent fix is sealing the photocells against the salt spray and repositioning them out of the direct spray path. Call (877) 610-2993 for an exact quote - estimates are free.
My keypad entry stopped working after a nor’easter-what should I check before calling?
After a nor’easter in Hull, the first thing to check is whether the keypad has visible salt residue on the face or around the seal, because wind-driven spray causes the internal terminals to corrode and short. Look for any moisture inside the keypad lens and check whether the breaker or GFCI that feeds the gate operator has tripped from moisture intrusion. If the keypad beeps but the gate doesn’t move, the problem is likely downstream. Call (877) 610-2993 for an exact quote - estimates are free.
Gate Parts & Welding in Hull
Gate parts and welding in Hull usually means one of three things: a hinge post rotted at the base, a latch seized solid from salt, or a weld that finally let go after one too many nor’easters. We fix all three, and we do the welding right in your driveway so the gate never leaves your property. A live person answers when you call (877) 610-2993, and you’ll get an honest answer about whether the part can be saved or needs replacing.
Hinge Replacement
Hull hinge hardware fails faster than almost anywhere else in the Boston area. Salt spray gets into the pin, the grease washes out, and within a couple of seasons the gate grinds or seizes completely. We replace hinge pins, rebuild hinge barrels, and weld on new stainless steel hinges when the originals are beyond saving. A typical hinge replacement in Hull runs $180-$420 depending on whether we’re doing pins or full hinge assemblies. On ornamental iron gates along Nantasket Avenue, we regularly see original hinges from the 1950s that have finally given out after decades of salt.
Post Replacement
A gate sags because the post moves, not because the gate got tired. In Hull’s sandy, salt-saturated soil, untreated steel posts rot at the base within a few winters. We see this every spring: a gate that worked in November is dragging by March. Post replacement in Hull typically runs $400-$900 depending on gate size, post material, and whether we’re setting a steel post in concrete or upgrading to powder-coated aluminum. We always recommend aluminum with a proper concrete footing near the water, because the alternative is doing this same repair again.
Rail Repair & Custom Welding
Rails crack, bow, and separate from pickets, especially on older wood and ornamental gates that took decades of wind and salt before anyone noticed. We straighten, reinforce, and weld broken rails back into alignment. On a typical Hull rail repair, you’re looking at $150-$350. If the rail has separated from the frame at multiple points, the smarter repair is often welding a full-length angle bracket along the inside rather than chasing individual cracks. Some gates can’t be ordered from a catalog. Old ornamental iron gates on pre-war Hull homes, odd-sized driveway openings, gates with decorative scrollwork that a homeowner wants preserved. Custom welding in Hull runs $200-$600 per job depending on scope. Bring us a picture or let us come look, and we’ll give you a written price before a single weld is made. Gate Parts & Welding is repair-first work, done where the gate stands.
My gate sags every spring after winter storms. Is welding a brace enough?
No, and this is the most common mistake we see in Hull. A gate sags because the post is moving or the hinges are worn, not because the gate frame needs a brace. Welding a brace onto a gate whose post has shifted is a band-aid. By the next frost heave cycle, the post moves again and the brace just becomes another stressed weld point. The fix is resetting the post with a proper concrete footing and stainless hinges. Call (877) 610-2993 for an exact quote - estimates are free.
Can you weld repair an old ornamental iron gate on a Nantasket Beach cottage, or is replacement smarter?
Usually you can repair it, and usually that’s the right call. Old ornamental iron gates from the Victorian era around Nantasket Beach were often built from thicker stock than anything you’d buy today. The weak points are usually the hinges, the post base, and thin decorative scrollwork, not the main frame. We can weld patches, replace broken scrollwork, and set a new post while preserving the gate itself. Replacement only makes sense when the frame itself is rotted through. Call (877) 610-2993 for an exact quote - estimates are free.
Brands We Service in Hull
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Linear, Viking, Ghost Controls, and DoorKing operators locally, which means most Hull repairs don’t wait on shipping. If we don’t have it on the truck, we’ll tell you exactly when it will arrive and what your options are. See our brands for full details.
Pricing for Gate Repair in Hull, MA
| Service | Typical range in Hull |
|---|---|
| Hinge replacement | $180-$420 |
| Hinge & post repair | $180-$340 |
| Gate realignment | $150-$275 |
| Rail repair | $150-$350 |
| Electric gate repair | $220-$600 |
| Gate motor repair | $180-$340 |
| Full motor replacement | $850-$1,750 |
| Post replacement | $400-$900 |
| Custom welding | $200-$600 |
| Keypad entry install | $450-$1,200 |
| Video intercom install | $800-$2,400 |
| Card reader add-on | $350-$900 |
What pushes price up in Hull: coastal-grade materials, deeper concrete footings to combat frost heave, and marine-rated hardware instead of standard galvanized. The price we quote is the price you pay. You approve it before any work begins, and it does not change at the door.
Neighborhoods We Serve in Hull
We work across the whole peninsula. Here are the areas we’re in most weeks:
- Nantasket Beach and the streets running off Nantasket Avenue
- Allerton and the lanes between Main Street and Hull Bay
- Waveland and the corner lots near Rockland Circle
- Kenberma and the older cottage rows back from the ocean side
- Hampton Circle and the homes near the high school
Response times across Hull are about the same from the beach side to the bay side - it’s a small town, and we know the shortcuts.
Service Area - Cities Near Hull
We serve Hull, MA directly, and we regularly work in neighboring towns including Hingham, MA, Cohasset, MA, North Scituate, MA, Weymouth, MA, and Quincy, MA. Dispatch and scheduling are coordinated from our Boston office; crews serve Hull locally with no trip charge inside the county.
Serving Hull, MA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Hull and the communities around it; dispatch is coordinated from our Boston office. The map shows the Hull coverage area; if your address is on it, we can help.
Also serving nearby: Hull, MA, Hingham, MA, Cohasset, MA, North Scituate, MA, Weymouth, MA, Quincy, MA.
FAQs About Gate Repair in Hull
Most gate repairs in Hull don’t require a permit, but if you’re replacing a gate or operator entirely, the town may want to see compliance with current safety codes. We know what Hull’s building department expects and will tell you straight if your job needs paperwork. If it does, we handle the details.
For a gate stuck open or closed, we can usually reach any Hull neighborhood within a couple of hours. We answer the phone 24/7 with a live person, not voicemail, and Hull’s small geographic size means we’re never far once we’re headed your way.
Yes. We cover all of Hull, including Nantasket Beach, Allerton, Atlantic Hill, and the Bay Avenue corridor. The name is on the shop, and the shop is down the road - that is the oldest accountability there is.
Call (877) 610-2993 today for a free estimate on any gate repair, installation, motor service, access control, or welding job in Hull. Hal or a member of his crew will answer, give you a straight price, and show up when promised. The 90-Day Done Right Promise is stamped in writing on every job, and the price we quote is the price you pay - no surprises, no haggling, no runaround.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hull Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks