Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Newton, KS
Gate repair in Newton typically costs $140 to $480 for most hinge, post, and realignment work, and we reach homes across the 67114 zip code quickly because we keep Newton jobs on our board daily. You’ll get Hal or someone from his crew, and you’ll know the price before we turn the first wrench. A gate here takes a beating from the open Harvey County plains that most city gates never see, which is why Newton properties are repeat customers rather than one-time jobs. Call (877) 610-2993 and a live person answers, day or night.
Why Newton Homes Are Different
Newton sits on flat, open plains where sustained Great Plains winds of 20 to 30 mph apply constant lateral stress to gate frames and hardware. There is almost no natural windbreak, and that wind never stops pushing. The freeze-thaw cycle through winter months heaves fence posts and throws gate alignment off plumb, creating a predictable spring rush for re-hanging and re-squaring work across Harvey County.
The housing stock makes Newton jobs specific. Many neighborhoods near downtown and the rail corridor date to the early 1900s through the 1960s, carrying aging wooden privacy gates and older chain-link swing gates on posts that have been in the ground longer than the fence panels. On acreage lots off Anderson Road and the rural routes southeast of town, welded-steel farm gates original to mid-century construction are common, and they fail in ways a suburban gate shop never sees. The active Mennonite farming community in the surrounding townships generates consistent demand for heavy tubular-steel swing gate and slide gate repair, a product category most suburban outfits won’t touch.
Gate Repair in Newton
Gate repair in Newton spans both ornamental residential gates and heavy-duty tubular farm gates, a dual-market mix you won’t find in Wichita’s suburban corridors. The wind exposure here accelerates hinge fatigue, post lean, and frame racking faster than nearly anywhere else in the region. When a gate starts dragging or the opener grinds, it’s usually because the frame has shifted under years of wind load or the post has heaved through another freeze-thaw winter. We fix the gate in your driveway rather than hauling it off, and we weld on site when the frame needs it.
Electric Gate Repair
Electric gates across Newton take a particular beating from the sustained winds that roll off the plains and slam into the gate frame all year. When a gate opener starts grinding, straining, or stopping mid-travel, it’s usually because the panel has shifted out of alignment and the motor is working against the frame, not with it. We service major brands including Viking, Ghost Controls, and DoorKing, and we fix the mechanical issue at the same time as the electrical one. Opener repairs, including a replacement board or limit switch, typically run $190 to $480.
Hinge & Post Repair
The winters here freeze and thaw hard. Post heave is a real thing in Harvey County clay. When a gate starts dragging or the latch stops lining up, the post has usually moved, not the gate. We dig down, re-set the post in fresh concrete or compacted rock, and weld or bolt new heavy-gauge hinges in place. A gate sags in the hinge post, not in the middle, and that is where we start. Post re-setting or gate realignment runs $180 to $350 depending on the size of the gate and how much digging we’re doing.
Gate Realignment & Welding
Wind loading on a full-privacy wooden gate or a long tubular farm gate will rack the frame over time. We cut and re-weld steel frames, shim and re-hang hinge barrels, and bring the gate back plumb. On Newton’s older homes with original chain-link swing gates, we often replace bent hinge posts and a sagging top rail in the same visit. Full weld repair on a tubular steel field gate usually falls between $150 and $300, done on site so the gate never leaves your property. The goal is a gate that closes square and latches without a shoulder shoved into it.
We repair what other companies want to replace. That matters in Newton, where the gate at the end of a long gravel drive has often been there longer than the house. Gate Repair is what we built this shop on, and it’s still the bulk of what we do.
How quickly can you get to Newton for a gate repair?
We reach most Newton addresses same day or next day, and for emergency repairs a live person takes your call 24 hours a day, 7 days a week. Scheduling is coordinated from our Wichita office, but crews serve Newton locally. Call (877) 610-2993 and you won’t get a voicemail.
Can you repair the old farm gates on properties outside Newton?
Yes. The agricultural gates around Harvey County are some of the most common jobs we do. We weld broken hinges, replace bent posts, and rebuild the frame on tubular steel swing and slide gates. We do on-site welding so the gate stays in your driveway, not hauled off to some shop.
Gate Installation in Newton
You’ll typically pay $2,800 to $7,500 for a steel driveway gate installed, and $900 to $2,600 for a pedestrian gate, depending on width, opener work, and whether old posts can be reused or need replacement. If you’re anywhere near Sand Creek or the older streets off Main, we know how wind loads here differ from tree-lined Wichita subdivisions, and we install accordingly.
Driveway Gate Installation
A driveway gate on a Newton acreage lot often does double duty: it keeps the driveway closed and it takes a beating from the wind. We see plenty of 12- and 14-foot welded steel gates out along Old Highway 81 that were hung on 4×4 wooden posts in the 1970s. That’s not a fixture that survives 25 mph sustained wind for long. We install on schedule-40 steel posts set 3 feet deep, with through-bolt hinge mounts. A single swing driveway gate runs $2,500 to $7,000 installed, with double swing gates at $3,800 to $9,500.
Sliding Gate Installation
Sliding gates are the right answer on Newton properties where the driveway slopes or where a swing gate would fight the wind every time it opened. A slide gate doesn’t catch the wind like a sail; it runs flat along the fence line. You’ll spend $3,200 to $8,500 for a new sliding gate in Newton, including the track or cantilever system, depending on length and whether an opener goes in. We also handle the Gate Installation side of opener mounting and safety edge placement.
Pedestrian Gate Installation
Pedestrian gates near downtown, around the older homes east of the rail corridor, tend to be narrow, close to a fence line, and built next to settled concrete. Width matters more than you’d think in a city with shifting frost. We install and square pedestrian gates at $900 to $2,600, with a drop rod or magnetic latch so the gate stays put in a wind gust. If the post is heaving from freeze-thaw, we dig it out and set a new one before the gate goes on.
How fast can you install a gate in Newton?
Standard installations can usually be scheduled within a few days to two weeks, depending on whether the gate needs custom fabrication or just mounting. We stock common steel frames and hardware locally so we’re not waiting on freight. Call (877) 610-2993 and we’ll give you a real window, not a maybe.
Does wind really affect how you install a gate in Newton?
Yes, and it’s the main thing that separates a gate that lasts from one that doesn’t. Newton’s flat, open terrain means almost no natural windbreak, and Harvey County regularly sees sustained winds of 20 to 30 mph. We set posts 3 feet deep on the hinge side and spec hardware that can hold up to that kind of constant load.
Gate Motor & Opener in Newton
If your gate stopped opening at 6 a.m. on a cold Newton morning, you want someone who will answer the phone and drive out to Harvey County without giving you a song and dance about dispatch windows. We’re that someone. Gate motor repair in Newton typically starts around $145 for basic troubleshooting and runs up to $900 for full slide motor replacement with hardware. Most Newton jobs are finished the same day we arrive.
Motor Installation
A new motor on an existing gate in Newton runs $650 to $1,450 installed, depending on the gate length, weight, and whether it is a swing or slide setup. We measure the gate the way it actually sits in your driveway, not the way it sat on paper when it was new, because Newton’s clay-heavy soil and winter heave have usually shifted things a degree or two off plumb. That measurement determines the motor size and the arm geometry before any part gets ordered.
Motor Repair
When a gate motor in Newton clicks but does not move, or humming starts but travel is weak, the fix is often a $35 to $90 part like a limit switch or a stripped gear inside a Viking actuator. We repair the motor where it sits in your driveway. Hal has rebuilt motors along North Main near the historic district and out on acreage east of town, and he’d rather replace a $50 gear than sell you a $700 motor because the gate doesn’t need it. Common motor repairs like limit switches and board-level fixes land in the $180 to $340 range.
Slide Motor Replacement
Sliding gates all over the county edges of Newton, especially on acreage properties and farm entrances off gravel roads, take a beating from wind-blown dirt and freeze-thaw cycles. A slide motor and full rack replacement on a tubular steel farm gate runs $1,100 to $2,300 depending on gate weight and travel length. We check the roller trucks and the rack alignment before condemning the motor, because a rack out of alignment by a quarter inch will chew through a brand-new motor in six months. The motor was rarely the real problem.
We keep common boards and gears on the truck so we’re not double-charging you for a second trip to town. Gate Motor & Opener service is what gets you back inside when the weather’s bad and the gate won’t budge.
Is emergency gate service available in Newton?
A gate stuck open in Newton is a security issue, and we treat it that way. A live person answers our phone 24 hours a day, seven days a week, and we run emergency service calls to Newton around the clock. When the call comes in at midnight, Hal picks up. Not a voicemail.
How does gate motor repair pricing in Newton compare to Wichita?
Pricing in Newton is comparable to Wichita for most services, ranging from $145 for basic troubleshooting to around $2,300 for heavy slide motor replacement. The difference is that our crews carry parts on the truck instead of charging you for a return trip. Your quote is written, agreed to, and fixed before we start.
Gate Access Control in Newton
Gate access control in Newton typically falls between $400 and $2,800 depending on whether we’re adding a keypad to an existing opener or building out a full phone-entry system with a card reader and video intercom at a gated entry. Most Newton homes and acreages we visit are up and running within a day or two of the initial call, and the price is locked before we touch a single wire. If you live off Old Main or out on a gravel lane, we’ll test signal strength and power access at the gate before we quote anything.
Keypad Entry
Keypad entry is the workhorse for Newton driveways and farm lanes. The most common setup we handle is a sealed weatherproof keypad mounted at the gate post, wired back to an opener. Newton’s freeze-thaw cycle is hard on outdoor electronics, and we regularly replace keypads that failed because they weren’t rated for direct exposure on the open plains. In Harvey County, a keypad has to survive ice, dust, and horizontal rain. A keypad on an existing opener runs $400 to $850 installed.
Phone Entry & Video Intercom
Phone entry systems let you buzz someone through from your cell phone, which works well for the acreage lots around Newton where the gate might be a quarter mile from the house. Instead of walking down a gravel lane in the dark, you get the call on your phone and open the gate from the kitchen. The systems we install need real range and reliable cellular signal, and we’ll test the setup from the gate before we call the job done. Phone entry runs $900 to $1,800 installed, with video intercom at $1,200 to $2,800 depending on monitor placement and conduit runs.
Remote Control & Card Readers
Remote control is the add that makes sense for Newton’s colder months. January mornings on the plains are not the time to be entering a four-digit code. We program remotes to existing openers across major brands, and we can add remote capability to gates that currently only run from a key switch. For properties with employees or multiple family vehicles, a card reader beats handing out codes that get written on scratch paper in the barn. Remote control added to an existing gate runs $150 to $350; card reader systems land at $800 to $1,600 for a single gate.
Access control can’t fix a gate that physically can’t move, so we always check the mechanical condition before we quote electronics. Gate Access Control is only as reliable as the gate it operates.
Can you do emergency gate access control repair in Newton?
We can. Around-the-clock live phone answer means a Newton homeowner never talks to a machine first. For a gate stuck open with a security concern, or stuck closed with a vehicle trapped, we prioritize those calls. Call (877) 610-2993 and describe what’s happening, and we’ll tell you honestly whether it’s a today-safety issue or a this-week scheduling issue.
Is there a warranty on gate access control work in Newton?
The 90-Day Done Right Promise is included on every job, in writing. If the access control system doesn’t work the way we said it would within that window, we come back and make it right. No fine print, no “weather-related exclusion” for a keypad that failed because we put it in the wrong location.
Gate Parts & Welding in Newton
Gate parts and welding in Newton usually runs $145 to $380 for hinge and post work, and most jobs are done on-site without hauling your gate anywhere. We get to Newton fast from our Wichita office, and the person who answers the phone at (877) 610-2993 is a live human. You’ll talk to someone who knows the open Harvey County winds and what they do to a gate frame over ten or twenty years.
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. Newton’s constant wind loads wear hinge pins and barrel hinges faster than you’d expect, especially on older ornamental iron gates near the historic downtown district. We cut out the old hinge, weld in a new one rated for the gate’s weight, and re-hang the gate square. Most hinge replacements in Newton run $145 to $285 including the new hardware.
Post Replacement
Freeze-thaw cycles in Harvey County heave posts out of plumb, and once the post moves, the whole gate follows. We dig out the old post, set a new one in concrete, and weld the hinge brackets back on. On acreage lots off Old Farm Road or around the edges of town, we often find mid-century welded-steel gate posts that have rusted through at ground level. Post replacement typically runs $285 to $520, depending on soil and gate weight.
Rail Repair & Custom Welding
When a gate frame twists or a weld cracks, the top and bottom rails take the brunt of it. We straighten and reinforce bent rails, or cut out the damaged section and weld in fresh steel. This is common on the heavy tubular farm gates the Mennonite farming community around Newton depends on. Rail repair work generally runs $110 to $240 per rail. Not every fix involves a catalog part, so we fabricate brackets and reinforcements on the spot. Custom welding jobs start around $95 and scale with time and material. Your gate stays in your driveway, not riding to a shop.
We show you the break before you buy it. Gate Parts & Welding is where we got our start, and it’s still the backbone of what we do when other shops want to sell a whole new gate.
Can you come to my Newton property today?
In most cases, yes. We schedule same-day or next-day trips to Newton for hinge failures, broken latches, and other safety-critical repairs. Call (877) 610-2993 and we’ll give you a straight arrival window. A live person answers the phone, and Hal coordinates the schedule personally.
How much does gate welding cost compared to nearby cities?
A typical welding repair in Newton runs about the same as in Valley Center or Park City, because labor and material costs don’t change much across a 20-mile radius. The bigger issue around Newton is wind stress, which means you may need heavier hinges or additional frame reinforcement than a Wichita gate would. We’ll show you the price difference before we cut anything.
Brands We Service in Newton
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common motors, boards, and safety components for the brands we see most often in Harvey County, which means most repairs don’t wait on freight. If we don’t have it, we know where to get it fast. See our brands for full details.
Pricing for Gate Repair in Newton, KS
| Service | Typical Range in Newton |
|---|---|
| Basic hinge or latch replacement | $120 - $220 |
| Post re-setting or realignment | $180 - $350 |
| Opener repair (board, limit switch) | $190 - $480 |
| Tubular steel field gate weld repair | $150 - $300 |
| Pedestrian gate installation | $900 - $2,600 |
| Single swing driveway gate installed | $2,500 - $7,000 |
| Double swing driveway gate installed | $3,800 - $9,500 |
| Sliding gate installed | $3,200 - $8,500 |
| Motor installation (residential swing) | $650 - $1,450 |
| Slide motor replacement with rack | $1,100 - $2,300 |
| Keypad entry on existing opener | $400 - $850 |
| Phone entry system installed | $900 - $1,800 |
What pushes a job toward the higher end in Newton is usually post condition and wind exposure. A gate hung on clean, square schedule-40 posts costs less than one needing old posts dug out and new footings poured in Harvey County clay. The price we hand you in writing is the price you pay at the end. That’s not a negotiation tactic, it’s just how Hal runs the shop.
Neighborhoods We Serve in Newton
We cover all of Newton, from the historic neighborhoods near downtown to the acreages out past the county line. Most calls get a same-day or next-day visit, and emergency gate failures are answered around the clock. The person who shows up will be the same person whose name is on the invoice.
- Historic district near Main Street and Broadway, with early-1900s homes and aging ornamental gates
- Residential streets along Sand Creek and near Centennial Park
- Neighborhoods around Spring Lake and the west side of 67114
- Acreage lots off Anderson Road and Old Farm Road
- Farm entrances throughout the Harvey County townships surrounding Newton
Service Area - Cities Near Newton
We work across Harvey County and into the surrounding region, with crews serving Newton, KS locally and scheduling coordinated from our Wichita office. We also run regular calls to Valley Center, KS, Park City, KS, Wichita, KS, Andover, KS, and El Dorado, KS. No trip charge inside the county.
Serving Newton, KS - Our Local Coverage Area
Gatewood Fence & Gate crews serve Newton and the communities around it; dispatch is coordinated from our Wichita office. The map shows the Newton coverage area; if your address is on it, we can help.
Also serving nearby: Newton, KS, Valley Center, KS, Park City, KS, Wichita, KS, Andover, KS, El Dorado, KS.
FAQs About Gate Repair in Newton
Yes, we cover all of 67114, including the neighborhoods around Sand Creek, the historic district near Main and Broadway, and the acreage lots off Meridian and Anderson. We also work the county roads immediately outside town for farm gate repairs.
No, our pricing is the same across the area. The difference in Newton is the type of damage, not the rate. Wind-driven frame racking and post heave are more common here than in sheltered suburban Wichita, so a Newton repair is more likely to involve realignment or post work than a simple hinge swap.
Every job carries our 90-Day Done Right Promise in writing, no matter where the gate is. If the gate fails again because of something we did, one call brings us back and we make it right. That promise is stamped on the invoice, not hidden in fine print. We stand behind it because Hal’s name is on the shop and on the invoice.
Call (877) 610-2993 for a free estimate. The price is quoted and agreed before any work starts, estimates are free, and there’s no trip charge inside Harvey County. Ask about $40 off any repair over $200, and our permanent 10% discount for seniors and veterans.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Newton Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks